Jump to content

Truck bed lighting

HONDABBQ
 Share

Recommended Posts

HONDABBQ Enthusiast

HONDABBQ

Posted
Posted

I was loading the bed a few nights ago for the first time in the dark. I dropped the MPT and the lights were on. It was great. 

Then the lights went out. I had to press the button in my fib again to regain lighting. Had to do this a few times to finish loading. 

 

Is there a way way to get the lights to stay on longer than a few minutes with the tailgate down? 

HONDABBQ Enthusiast

HONDABBQ

Posted
  • Author
Posted
32 minutes ago, 19sierra53 said:

Ya, turn your cargo light switch on. Its on the left of your dash by the fog light switch

I saw that but assumed it was for the top cargo light. 

 

HONDABBQ Enthusiast

HONDABBQ

Posted
  • Author
Posted
23 minutes ago, 19sierra53 said:

Nope, box lights too and also the LED by the tailgate handle, or button i guess you would say now

It does seem a little silly to have to go in the truck to hit that light switch to turn them on long term. 

redwngr Senior Enthusiast

redwngr

Posted
Posted
1 hour ago, HONDABBQ said:

It does seem a little silly to have to go in the truck to hit that light switch to turn them on long term. 

Pressing the button in the cab more than once will change which lights are on: 

 

- Initial Press:
- CHMSL/Cargo Bed Lights - On
- Cargo Mirror Lights - On
- Cargo Switch Indicator (if equipped) - On

 

- Next Press: (if with in 5 seconds of the previous button press):
- CHMSL/Cargo Bed Lights - On
- Cargo Mirror Lights - Off
- Cargo Switch Indicator (if equipped) - On

 

- Next Press:
- CHMSL/Cargo Bed Lights - Off
- Cargo Mirror Lights - Off
- Cargo Switch Indicator (if equipped) - Off

  • Like 1
Ryno12 Enthusiast

Ryno12

Posted
Posted

The poor bed lighting was one of my first annoyances with the new trucks. There should be a switch inside the tailgate to turn them on.

I ultimately installed aftermarket LED strip lighting under each rail & wired it into the trailering plug wiring and added a switch by the grab handle.

0bd75510461d721e062daf8162e8aecf.jpg

dbcbe336deca83192bc880b1529ff4d2.jpg

  • Like 3
  • Thanks 1
DuRsT Enthusiast

DuRsT

Posted
Posted

Very nice solution.

 

My '17 F250 had a button in the bed that turned on the bed led's which was awesome.  It is still my favorite truck ever, just won't fit in my garage.

  • Like 2
Troger Enthusiast

Troger

Posted
Posted
20 hours ago, Ryno12 said:

The poor bed lighting was one of my first annoyances with the new trucks. There should be a switch inside the tailgate to turn them on.

I ultimately installed aftermarket LED strip lighting under each rail & wired it into the trailering plug wiring and added a switch by the grab handle.

0bd75510461d721e062daf8162e8aecf.jpg

dbcbe336deca83192bc880b1529ff4d2.jpg

Nice, can you share how you ran the wiring and how you wired them to the trailer plug?

Ryno12 Enthusiast

Ryno12

Posted
Posted
Nice, can you share how you ran the wiring and how you wired them to the trailer plug?

I removed the grab handle & behind it is a grommet. I fed the wires through the grommet & over to the back of the trailer plug located in the box. (I have an HD). From there, I removed the plug and disconnected the 12v hot lead & ground wire from the plug & made the connection to the LED light strip there. Once the connection was made, I put the plug back together and popped it back in place.
If you don’t have the box mounted plug, you can just run the wires further down to the standard trailer plug by the receiver.
  • Thanks 1
Troger Enthusiast

Troger

Posted
Posted
2 minutes ago, Ryno12 said:


I removed the grab handle & behind it is a grommet. I fed the wires through the grommet & over to the back of the trailer plug located in the box. (I have an HD). From there, I removed the plug and disconnected the 12v hot lead & ground wire from the plug & made the connection to the LED light strip there. Once the connection was made, I put the plug back together and popped it back in place.
If you don’t have the box mounted plug, you can just run the wires further down to the standard trailer plug by the receiver.

Thanks for the info.  Another project for me to work on.

ILSilverado Enthusiast

ILSilverado

Posted
Posted
On 2/23/2020 at 4:32 PM, wacnstac said:

Would have been sweet if there was a button on the FOB for this.

Yea or how about one in the bed?

  • Like 3
Troger Enthusiast

Troger

Posted
Posted

For some reason my LED bed lights that i installed flash every 5 or so seconds when my running lights are off (they are wired to be on when the running lights are on).

I wired them with a CURT 56584 wiring harness to avoid cutting or splicing any factory wiring harness and used the running light wire and ground to power the LED bed lights.

When I switch them on with the running lights on they also flash about 7 times then they finally power on normally.  Does anyone have an idea why they would flash? 

 

Troger Enthusiast

Troger

Posted
Posted

Looks like the running light source has some monitor/power activity even when powered off.  Guess I will have to run power for the bed lights to the 7 way 12v constant and just remember to turn off the switch when not in use.  Either that or run them constant with a relay to the factory bed lights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Sugar Bears 2015 GMC Terrain SLE-2 2.4 AWD

      By Grumpy Bear · Posted

      286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • AidenVorpagel
      cam upgrade in CA

      By AidenVorpagel · Posted

      hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
    • B14Sierra
      Noise after AFM delete

      By B14Sierra · Posted

      Did you figure it out?
    • B14Sierra
      Possible lifter tick after DOD delete

      By B14Sierra · Posted

      Update. I started chasing down my symptoms. Started first with pulling valve covers and looked at everything. Everything looked good and couldn't hear or feel anything different. Then a compression test. 240 psi or really close on each cylinder. I was worried I was a tooth off of timing. Not bad for an engine with 173,000. Granted I did put new heads on. I sprayed water around the injector area to see if I could hear a change. Nothing. I hooked up my new hp tuner which I should have done in the first place but I don't really know what I'm looking at just yet but am learning. I noticed the fuel trims were way off so that told me I have to have either a bad injector or exhaust leak. New injectors, so I did the shop vac on blower and in the tail pipe. Sprayed soapy water and found the exhaust flange on the drivers side was leaking. I didn't think it would be that considereding I pulled the heads and left the manifolds attached. I did have the transmission replaced not long ago. They must have not seated them properly but I guess I didn't notice. I put in new gaskets on both sides. Which by the way isn't a bad job but I had a hard time getting them to seal right. Took two attempts. Reset the fuel trims and the ticking is gone, engine runs smooth and acceleration has improved. Got to feel the real difference with that stage 1 cam. It's not that big of a difference but it does add a little more. It feels like how the truck should have been from the factory.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled I?    Stribeck says that we need a certain amount of viscosity under conditions of load and velocity to prevent two surfaces of a know roughness from tearing each other asunder. And we have marketing trying to tell the masses that those two surfaced require less of that commodity due to more exact limits being placed on the same old clearances. We also know that there are limits to how hard something can before it becomes to brittle to be viable and to smooth to 'wet' the surface and that both of those conditions have been known and met since about the Second World War.    That viscosity value shook out at 10 centistokes at 212 F just under a hundred years ago.  Give this a look: [Anton Parr]     What is advertised is the Kinematic viscosity (mm2/s) or that which has been density adjusted but the value we are after is the dynamic viscosity (mPa.s) or true viscosity. You can see that this number is dependent on density thus base stock and temperature. You can also see that an SAE 30 doesn't reach that value in this example. However an SAE 30 that is at the upper end of the SAE 30 range; 12.5 cSt (mm2/s), might. 12.5 * .83 = 10.375 (mm2/s). If you could find an SAE 30 at the upper end these days.   Then there is the complication of viscosity modifiers or VII or VM, whatever you wish to call them. Polymers added to very thin base oils, perhaps 3 to 6 cP oils, that will meet the SAE *W30 spec at 'tested' shear rates and 100 C/212F  target temperature. So a polymer fortified base that is a fraction of the 10 cP requirement Stribeck insist upon.   This could be all well and good if those polymers didn't have two very problematic 'features'. They shear or loose viscosity both 1.) permanently and 2.) temporality. And they do both omitted in the advertised data with the distinct  purpose of deceiving the consumer of the actual operating state of the fluid. I've shown the example of Warren Oils COSTCO 10.91 cSt 5W30 formuation several times where the 100 C HTHS value is 6.9 cP!! That's the temporary shear down and with and SSI or shear stability index of 9.4 cSt. Note the intentional deception in using mixed units?    After a short while that 9.4 cSt oil has a viscosity corrected dynamic value of 7.8 cP. But as the SSI is still within the range of an SAE *W30 whose lower value is 9.3 cSt.    This allows them to continue to call this SAE 16 weight oil a 30 weight, the cake, and still meet the API requirements for fuel efficiency IMPROVEMENT mandated by the EPA. The eating of the cake. By the time you've worn out your motor doing the responsible thing by adhering to the warranty requirements, (the stick), you get deprived of the carrot, wear control. So sad, to bad.   So what can be done? Do I need actually say? [Anton Parr]       Even this must be monitored if the oil is on the low side and the VII an organic or you opt for a 0W40 with an even lighter base oil and more / higher MW VII. (Note the lower density of the 40 weight versus the SAE 30 mono-weight?)    There is another workaround. Temperature. An SAE *W30 run at a bulk temperature of between 180 and 195 F.    Being the belt and suspenders sort I am I do both. Run it cook and run it heavy.    In Part II I'll work the AW package. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...