Who's going to retrofit this on our K2xx's

camcamaro1991 · February 24, 2020

Illuminated GMC Emblem

Red illuminated part # 84741557

Black illuminated part # 84741559

knkguillot · February 24, 2020

Definitely going to follow this, I'd love to have that emblem work on my 2017!!

Sent from my moto g(7) using Tapatalk

IronVilkas · February 25, 2020

There are videos on illuminated bowties im sure its the same for the gmcs

Sent from my Pixel 2 XL using Tapatalk

camcamaro1991 · February 25, 2020

13 minutes ago, IronVilkas said:

There are videos on illuminated bowties im sure its the same for the gmcs

Sent from my Pixel 2 XL using Tapatalk

T1's part number is the first time they have offered a OEM solution for GMC's, unless they are allowing them for K2xx's here shortly on a later release. However I am sure its very easy to add them.

TXGREEK · February 25, 2020

That would look great on a good looking “LIFTED” truck!

Sent from Above

tmo · February 25, 2020

I’ve done some light research on this. They are an inch too long and overlap with the grill inserts. Modifying them to fit wouldn’t be hard if they were roughly the same size, but I’m not sure how you would do it without making it look botched.

camcamaro1991 · February 25, 2020

2 hours ago, tmo said:

I’ve done some light research on this. They are an inch too long and overlap with the grill inserts. Modifying them to fit wouldn’t be hard if they were roughly the same size, but I’m not sure how you would do it without making it look botched.

I have 2 grilles, OEM Denali, and take off AT, I have the AT as I used the paint matched surround to reduce the amount of chrome. I know there is a lot more room on my Denali grille left/right vs my AT grille. however as you stated fitment is a issue as the emblems are larger, still might try this if I can get a good deal on the newer emblem.

outside of that, hopefully they release this for the K2xx's then, as only the chevy's got it for the K2xx's

for giggles can you post the size specs for K2xx & T1 emblems? L,W,H, etc...

tmo · February 25, 2020

I have 2 grilles, OEM Denali, and take off AT, I have the AT as I used the paint matched surround to reduce the amount of chrome. I know there is a lot more room on my Denali grille left/right vs my AT grille. however as you stated fitment is a issue as the emblems are larger, still might try this if I can get a good deal on the newer emblem.

outside of that, hopefully they release this for the K2xx's then, as only the chevy's got it for the K2xx's

for giggles can you post the size specs for K2xx & T1 emblems? L,W,H, etc...

My grill is the SLT, which is the same as the AT just chrome I believe. You’re right, it is much more room, just not enough.

Hopefully they will release a K2 emblem or one for the Yukon that would fit.

The dimensions for the T1 are “18 1/2" long and 3 1/4" wide”. The height is the same. K2 is 17” long

camcamaro1991 · February 25, 2020

23 minutes ago, tmo said:

My grill is the SLT, which is the same as the AT just chrome I believe. You’re right, it is much more room, just not enough.

Hopefully they will release a K2 emblem or one for the Yukon that would fit.

The dimensions for the T1 are “18 1/2" long and 3 1/4" wide”. The height is the same. K2 is 17” long

I have a Denali grille, I only used the AT painted surround (outer trim molding) plan is to add a HD hood later.

Denali grilles have more room

I need to know the measurements of the T1 emblem.