Jump to content

Recommended Posts

Posted

I'm having some issues with my brand new AT4. Just purchased a 2020 AT4 (2 weeks ago), had 24 miles on it. Within 100 miles it started making a clunking sound under the bed. Another 50, the steering started pulling and I had to take it in. Took it in and they tightened the u-bolts for the leaf springs which fixed most of the problem. The issue I still have is an annoying clunking sounds somewhere towards the middle of the truck, all the time. Happens at every stop sign, every turn, every speed bump. It's driving me crazy. The last time the dealer wouldn't even take it in. They said, "let us do some research before we bring it in." The suspension definitely doesn't feel like it did day 1, feels a lot "looser" and the clunking sound is tough to deal with. 

 

Anyone having similar problems? Find a fix for it? 

 

Thank you!

Posted

My clunking under the bed was diagnosed to be a defective leaf spring.  Dealer is going to fix it under warranty.  Do you have the diesel? Sometimes the def fluid can slosh around and make a thumping noise.

Posted (edited)

Thanks for the responses. I have the 6.2L. As I mentioned, they tightened the leaf springs, but there could be more to it.

 

As Davester mentioned, I just scheduled a service at a new dealer to have them look at it.

 

Kchampagne, let me know if that leaf springs fixes your issues.

Edited by Gthompson
Posted

My leaf spring squeak. I can spray lube on them at the plastic pads and that last a few days then starts squeaking again. Very frustrating pita. Dealer has looked at them twice and it’s the same answer. That oh we cleaned them and there’s nothing wrong.

They also want to give me shit because I installed Air Lift load lifter 5000 air bags. Smh.

My rear brakes keep intermittently squealing and they said because I had painted my calipers red that may be causing it. Horse Shit. My dealer sucks.

2019 Custom Trail Boss

 

 

Sent from my iPhone using Tapatalk

Posted

Might want to grab and shake the shocks to make sure the bolts and bushings are tight.

  • Like 1
Posted

The tech at the dealer was able to replicate the noise in the leaf spring by rocking the bed side to side at the axle. Squirt a bit of lubricant in the leaf spring, and the noise would temporarily decrease.

  • Like 1
Posted

When they re-torqued the bolts of the rear leaf springs at the dealer they were supposed to also install new rubber insets in the leaf springs. My truck was doing the same thing, after the repair the rear noises in the suspension went right away. 
 

84747D2A-6D03-4703-BBA5-10F34FBEAFBC.jpeg

BEA5D0AC-2042-4BA0-8FD0-6F155E5388A9.jpeg

  • Like 2
  • Thanks 1
Posted

My stealer looked at mine last week and said the inserts were the correct ones.
Said they cleaned between the leafs real good and it fixed the problem.
This weekend the problem returned.
I have Air Lift bags on the rear of my truck and they are giving me hell saying the bags are causing this issue.
I’ve added lots of air, taken all the air out, and had the pressure up to about 12 psi and various ranges in between and it will still squeak.
Every damn time I bring it in it’s not hardly doing it. I’ve found when it rains or there’s just a lot of moisture in the air, the springs tend to not squeak or not squeak that bad. I keep videoing when it’s bad but I guess that’s not good enough for them.
I’m sick of dealing with this shit and ready to just fix the shit myself.
They say I’ve technically voided my warranty because I’ve modified the rear suspension. SMDH
Screw it. I might as well go ahead and lift it more now.
My rear brakes keep squealing intermittently too and I’ve have videos of that as well.

  • Sad 1
Posted

Thanks for all of the responses, I took my truck to a second dealer, they confirmed that I’m just hearing play in the rear differential. They let me drive another AT4 around the lot, same issues. It’s just a clunky truck. Not sure how I missed it during my initial test drive. My last two trucks, 2019 Chevy Trailboss and 2013 F150 were quite a bit quieter.

  • Like 1
Posted
On 3/23/2020 at 5:04 PM, Gthompson said:

Thanks for all of the responses, I took my truck to a second dealer, they confirmed that I’m just hearing play in the rear differential. They let me drive another AT4 around the lot, same issues. It’s just a clunky truck. Not sure how I missed it during my initial test drive. My last two trucks, 2019 Chevy Trailboss and 2013 F150 were quite a bit quieter.

Hey I just wanted to say please check out this other tread its seems these two should be put together.

This shouldn't be normal, I don't want a 50k clunky truck. Maybe we are all hearing the same thing but none of us nor the dealerships can figure it out. I can hear play in my rear axel as well by rocking the box side to side but that's not the noise I'm hearing in the cab while driving and if it is I will be very disappointed.

  • Like 1
Posted (edited)

Thanks, Shawn Fox. That’s interesting, going to jump into that conversation. I thought the same thing, I definitely don’t want a clunky 50+K truck. That’s insane to me. Also, considering I just traded a 2019 Trail Boss, which I would guess has the same rear diff with no clunking sound, it’s hard to believe. I’m going to post on the other thread as well. I hope this is the issue and it can be fixed, can’t imagine keeping this truck for long with it banging around from even pulling into a gas station. 

 

Also, good point about the play in the rear axle when you push on the side. I checked a brand new Denali, my old Trail Boss (that's sitting on the lot for sale), a used AT4 and a brand new AT4. They all do that, but I know my old truck didn't make this particular noise.

Edited by Gthompson
Posted

I am having the same issues. I brought it in the dealership and they tightened bolts, however it was to no real avail. Let's get more people to chime in and maybe GMC will actually do something about this in a TSB...

  • Like 1
Posted

Based on jumping into the other thread that Shawn Fox linked above, I'm trying to find a shop that has chassis ears to narrow down where it's coming from. When my leaf spring u-bolts were loose, I could clearly tell it was coming from the rear of the vehicle. It felt as though the spare tire was loose and banging around. After tightening that, the remaining clunk is farther up in the vehicle. Frustrating. 

Posted

That is my exact experience as well. Sounds like a loose spare tire. Not a metal clunk but almost like a tire hitting the chassis. Please let me know what you find.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,724
    Total Members
    8,960
    Most Online
    No1UKnow
    Newest Member
    No1UKnow
    Joined
  • Who's Online   5 Members, 1 Anonymous, 1,225 Guests (See full list)


  • Latest Articles

  • Posts

    • I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
    • Stabilitrack was a stability control, traction control system, that functioned independently from the transfer case.   Z-71 has nothing to do with the transfer case or differential.   If it does have an AWD system, my memory recalls this being specific to the Denali trim, converting won't be as simple as swapping out mechanical parts like differentials and transfer cases. It will require reprogramming at a minimum. Long story short, not likely worth it.   Pulling a fuse, may disable the AWD system, it might also prevent any other transfer case functions.   However, the AWD case was generally based on the same transfer case you refer to in the 2006 Suburban. If it still has a 4-High and 4-Low where the transfer case locks and splits power 50-50 front to rear, what are you gaining by changing anything? A true-rear wheel drive only, what good will that serve? Not enough to go through the trouble of changing out all the parts.    Generally, all the factory systems will handle a 33" tire and re-gearing. Probably a 35" tire too, if you aren't driving like a caveman. If 35" tires are in the plan...   If you do plan on driving like a caveman or are fully committed to 35" tires, an entire re-think of the build is probably in order. Starting with square one, an IFS front end isn't going to be the best starting point for 35's and caveman driving. 
    • 1/2 qt over full ain`t gonna hurt $h!t. Most times, a whole qt won`t either. Most have windage trays now. As long as the crank isn`t slapping itself in the oil, it`s not the end of the world.   We used to overfill 1 qt at the track, at race time. Better to have it over full than having the pan sucked dry at 6500 rpm`s.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...