Jump to content

Protect tailgate from forklifts

DrScience
 Share

Recommended Posts

DrScience New Member

DrScience

Posted
Posted

Hey, new to this forum. I’ve had a few Silverados and a Colorado over the years and Just picked up a 2020 Silverado. I use this it to pick up pallets of grain once week or so. Inevitably the new kid at the warehouse will bump the forklift into the tailgate resulting in a bunch of ugly dents generally not worth fixing but really annoying. 
 

I’ve searched over the years but never found any type of mod to protect the tailgate so thinking of diy-ing it. Something like a length or pvc with insulation wrapped around it that can hang by straps and hooks right over the end of the tailgate when down. Or a length of 2x4 with rubber.  Removable so it just sits in the bed when not in use.

 

anyone seen any kind of mod to protect the tailgate or made one themselves? I’d rather not have to use a trailer. 

DrScience New Member

DrScience

Posted
  • Author
Posted

I’ve been usually watching and guiding them from hitting the wheel wells on the much more narrow Colorado but I guess that won’t be a problem. Maybe it’s as simple as that. But seeing as they are usually somewhat or completely high I’d still like a guard lol.

topgear1224 Enthusiast

topgear1224

Posted
Posted

You can always remove the tailgate it's not that difficult.

all the other ones more than likely the forklift operator seems like I'm good and hit harder than you would if it was just your tailgate which is probably going to result in a bent tailgate instead of a dinged up tailgate.

if you're insisting on DIY and you can always split open some pool noodles and create a little bumper over the top of the entire tailgate.

Sent from my SM-N975U using Tapatalk

DrScience New Member

DrScience

Posted
  • Author
Posted
2 minutes ago, topgear1224 said:

You can always remove the tailgate it's not that difficult.

all the other ones more than likely the forklift operator seems like I'm good and hit harder than you would if it was just your tailgate which is probably going to result in a bent tailgate instead of a dinged up tailgate.

if you're insisting on DIY and you can always split open some pool noodles and create a little bumper over the top of the entire tailgate.

Sent from my SM-N975U using Tapatalk
 

Good suggestion. Thanks

davester Senior Enthusiast

davester

Posted
Posted (edited)

If the person is ramming your truck hard enough to dent the end of the tailgate, a pool noodle isn't going to make a difference other than making the end of the tailgate more visible (which likely is a good thing anyway).  You could put a strip of angle iron across the length of the tailgate, but that'll just move where the damage can happen (as then it could just push in the end of the tailgate more evenly across the tailgate, or it could do something like bend the tailgate hinges instead).

 

Edit:  Alternately, the pool noodle is a bad thing, because it gives the operator something to aim at...

Edited by davester
Chrisj4 Enthusiast

Chrisj4

Posted
Posted

When I read this title I thought it was going to be a joke about the exhaust...haha

  • Like 2
  • 6 months later...
ericarenee Enthusiast

ericarenee

Posted
Posted

Make him pay for it. I Bet he will not hit it a second time. They load pellets of tile. Mortar and often lumber and never damage nothing on my Trucks or  Vans. My thinking is personal responsibility. Tell them they hit it they buy it , if they do not like the ideal let them load it by hand. 

 

 

Sorry to sound mean but its not that difficult. 

 

but getting a metal grill type tailgate might be the best answer , Like the ones for 5th wheel hitch

eppieguy Senior Enthusiast

eppieguy

Posted
Posted

I grew with the above, they damage it, they pay for it, it will only happen once. 

Imcrazy Senior Enthusiast

Imcrazy

Posted
Posted

Take a 2x6 as wide as your tailgate and screw a 1/4” piece of plywood to it that is the same size of your tailgate plus the width of the 2x6. Then just set that on the tailgate before they load.


Sent from my iPhone using Tapatalk

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)

Spray in bed liner?

Plastic throw-in bed liner? 

Factory painted bed floor? 

Worried about bed floor scratches or just tailgate getting dented when folded down. 

42" x 48" pallet (or similar)?

 

I've loaded 100's of pallets with similar loads and don't think I've ever hit a tailgate.  

 

Maybe the forklift/forks are too small for the pallet size and load being handled?

It's not tough to set a pallet partway in and get another bite to push it the rest of the way -- while staying safely away from the tailgate (or bumper, if tailgate has been removed).

 

 

 

 

 

 

 

Edited by redwngr
  • Like 1
  • Thanks 1
Imcrazy Senior Enthusiast

Imcrazy

Posted
Posted
Spray in bed liner?
Plastic throw-in bed liner? 
Factory painted bed floor? 
Worried about bed floor scratches or just tailgate getting dented when folded down. 
42" x 48" pallet (or similar)?
 
I've loaded 100's of pallets with similar loads and don't think I've ever hit a tailgate.  
 
Maybe the forklift/forks are too small for the pallet size and load being handled?
It's not tough to set a pallet partway in and get another bite to push it the rest of the way -- while staying safely away from the tailgate (or bumper, if tailgate has been removed).
 
 
 
 
 
 
 

Agreed on the fact that the operator should be capable, have run lift trucks for 15+ years and never damaged a vehicle but, have seen other experienced guys do it a few times. It’s carelessness IMO not lack of skill.


Sent from my iPhone using Tapatalk
  • Like 1
  • Thanks 1
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   2 Members, 0 Anonymous, 630 Guests (See full list)

  • Latest Articles

  • Posts

    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all the help so far!   I did try right from 2026 right down to 2021, and only from 2023 down lets me select the option for tire psi change, but I get the vehicle not supported error!   I'll definitely try it under Chevrolet after work today, and I'll get the sensor number from gm for my truck tire sensors. And I'll let you know if it works for me under Chevrolet!   And if that doesn't work, I'm going to guess that what @Atlas said about maybe I have a different body control module could be true!  
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 
    • davester
      Needing this part.

      By davester · Posted

      I'm sure if you went to a junkyard where you go in and pull the part off the truck yourself, not a used part place where they do it for you, you can get that part on it's own.  Depending on if and what else you would be buying, and time of day, they might even just skip over adding it as a item to the bill.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...