2.5" Front and 2" Rear Leveling lift kit for 2019-2020 Chevy Silverad1500 MotoFab

[ScX31]

How does the 2.5” motofab kit ride compared to factory?

[SEOKGuy]

On 8/28/2020 at 1:37 PM, ullose272 said:

Here is mine

Sent from my SM-G973U using Tapatalk
 

I love that stance.  What shoe size and style are you running?  I'm considering this lift package along with airbags for better towing performance.  Does your truck have a factory suspension lift?

[ullose272]

On 9/2/2020 at 2:10 AM, SEOKGuy said:

I love that stance.  What shoe size and style are you running?  I'm considering this lift package along with airbags for better towing performance.  Does your truck have a factory suspension lift?

Trailboss take offs, 275 65 18

[SEOKGuy]

I ordered the front 2.5"/rear 2" and shock extenders yesterday.  I'm still running the original 265 65 18 tires so it will look a little funny until I get new ones after these wear out.  Only 7800 miles on them so I can't bring myself to replace them yet even though they look like passenger car tires to me.  I saw a set of BFG AT in 275 65 18 on facebook marketplace for $950 with original 18" chevy rims.  Good tread but I have the same rims.  

On 9/3/2020 at 2:03 PM, ullose272 said:

Trailboss take offs, 275 65 18

Ullose272, what did you pay for the TB take offs and how did you locate them?  I like those black rims much better than the brushed aluminum I have.

 

Something else that occurred to me is if I go with loadrange E tires and run more pressure (something like 50psi) isn't that going to have my TPMS erroring out all the time?  That could get annoying.

[ullose272]

I ordered the front 2.5"/rear 2" and shock extenders yesterday.  I'm still running the original 265 65 18 tires so it will look a little funny until I get new ones after these wear out.  Only 7800 miles on them so I can't bring myself to replace them yet even though they look like passenger car tires to me.  I saw a set of BFG AT in 275 65 18 on facebook marketplace for $950 with original 18" chevy rims.  Good tread but I have the same rims.  
Ullose272, what did you pay for the TB take offs and how did you locate them?  I like those black rims much better than the brushed aluminum I have.
 
Something else that occurred to me is if I go with loadrange E tires and run more pressure (something like 50psi) isn't that going to have my TPMS erroring out all the time?  That could get annoying.

The dealer put the TB wheels on it, its how it was on the lot. Just because you have E rated tires doesnt mean you need to run more air, i have always run about 40psi in my E rated tires in the past and bumped them up when towing.

Sent from my SM-G973U using Tapatalk

[Bcoyle21]

Anyone running a 1” black in the back instead of the 2” provided? 

[maconmatt]

I just had my local mechanic install mine. For what it’s worth, MotoFab told me the extenders weren’t necessary and my mechanic installed mine without them. I haven’t noticed any I’ll effects of not having them. It looks and drives great!

 

 

 

Sent from my iPhone using Tapatalk

[SEOKGuy]

12 hours ago, Bcoyle21 said:

Anyone running a 1” black in the back instead of the 2” provided? 

I looked for the 1" but couldn't confirm it would fit the 2020 so I ordered the 2" instead. 

[DkG]

Interested to see if anyone has uses a 3" Front 2" rear level kit on a 2020 Sierra? 

Loved this look on my 2016 Silverado, but the local mechanic doesn't reccomend a 3" front on the 2019/2020 MY.

[Frank20LT]

Here's mine with the 2.5"/2" kit from motofab.

[andrewb24]

On 9/8/2020 at 12:11 PM, Bcoyle21 said:

Anyone running a 1” black in the back instead of the 2” provided? 

I installed a 1" block on my 2020 1500 LT myself and wasnt hard at all. I have the 2" RC in the front and considering the  2.5" motofab because im right at 1/2" difference between front and back.

[Bcoyle21]

10 hours ago, andrewb24 said:

I installed a 1" block on my 2020 1500 LT myself and wasnt hard at all. I have the 2" RC in the front and considering the  2.5" motofab because im right at 1/2" difference between front and back.

Do you have picture of your setup?

[andrewb24]

15 hours ago, Bcoyle21 said:

Do you have picture of your setup?

not the best angle but I can take another pic later because im in my work vehicle.

[70and19]

what size tires do you think you could install? I have the skinny 17" cheap factory tires and wheels and don't like them, obviously.

[70and19]

On 9/9/2020 at 12:27 AM, SEOKGuy said:

I looked for the 1" but couldn't confirm it would fit the 2020 so I ordered the 2" instead. 

I think the instructions say that from the factory they already have a 1" block. You actually have to remove it to install the replacement. I wonder if there are guys that have left it in and get a larger lift then expected!?!