Jump to content

Recommended Posts

Posted
On 11/4/2024 at 1:11 PM, Srode1 said:

Great, mine just threw this code at 122,000 miles - 2015.  So it's just outside the special coverage.   I guess I'll call the transmission shop that's been changing my fluid and ask them about replacing it.  My Truck won't fit on my 4 post lift, and the part is cheap it seems.  I don't feel like doing it myself, too many other things going on in the garage right now with projects.  It's not shifting harsh and I can see the transmission temp is fine on the DIC - it was 155 when it set the code today.  Is there any urgency to get it done now vs just run it for now and change when the fluid is due again? 


It’s been a month so maybe you took care of this, but in my case the truck was still shifting fine. I only knew about it due to the codes coming up, then the needle started bouncing not long after. Since there were no hard shifts I wasn’t worried about getting it in for repairs immediately. Scheduled an appt and still drove it until then. So in my case I’d say it wasn’t urgent enough to stop driving it until it was repaired since the shifting was fine, but to each their own. 

Posted
7 hours ago, midwestdenaliguy said:


It’s been a month so maybe you took care of this, but in my case the truck was still shifting fine. I only knew about it due to the codes coming up, then the needle started bouncing not long after. Since there were no hard shifts I wasn’t worried about getting it in for repairs immediately. Scheduled an appt and still drove it until then. So in my case I’d say it wasn’t urgent enough to stop driving it until it was repaired since the shifting was fine, but to each their own. 

yeah, totally agree.  I won't get it fixed till next fluid change.  I cleared the code and it came back twice, and now it's been a while since the last code clearing.  Maybe the cooler weather is keeping the temperature keeps the fluid below some threshold where the wiring/sensor becomes a problem - who knows.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Are we talking about the same thing, though? The 7 versus 3 wear metals was from Lakespeed's 3.0-specific oil brand comparison test between AcDelco oil and Mobil ESP. The filter remains a constant so whatever excess particles the AcDelco oil is producing aren't being filtered out.   I'm assuming there's a parallel comparison to be made; IF the filter can filter down those particles, engine life increases, and your graph makes the case that a better filter (lower micron rating) can increase engine life. Introducing fewer particles AND filtering those particles with higher efficiency is the best of all worlds. Good oil, good filter.   Where we may disagree is the "baseline relative engine life". I'm more apt to believe the base engine life value is 200k+ on very average oil and filters, "bulk oil of unknown brand and white-label generic fleet-grade filter, Jiffy Lube"   Going from a 10 micron filter to a 5 micron filter should boost a base 200k to 275k in a vacuum as a single factor alone.   Here's the whatabout: How does regularly changing the oil and filter ahead of recommended schedule influence baseline engine life? Most people aren't going to science the heck out of this stuff or ask about Micron ratings, HTHS, or wear comparison tests at Jiffy Lube. Most of the Jiffy lube techs would say they need to call their tech support line to even try to get an answer.   --   Because we love anecdotes here, when I was fishing for 4.3 parts at a local yard this weekend, ALL of the 4.3 vehicles had well over 200k. I love looking at odometers of junked vehicles. How far did THIS go before landing at the crusher? The ones that still had engines weren't seized. None of them were vehicles I'd consider were Amsoil queens, in fact most of them had some kind of service cling-sticker in the corner of the windshield indicating it probably had very average maintenance services. Even the fresh parts rigs- I'm not sure taking an S/T series to 400k has much value considering the running value of those vehicles was probably somewhere around $1,000. 25+ years is a good run on time alone.   The intake manifold I salvaged had clean and bright pool areas. As expected, I found the fuel lines in the manifold rubbed through, just like mine. I'm guessing the lines on that donor truck started leaking, the truck started running rough, and its owner said that's enough I'm unwilling or can't take it out of service for several days, or spend $1000+ to repair it at a shop, it's simply time for a newer more reliable vehicle (or, more than likely, this is the 2nd, 3rd time this has happened in the truck's lifetime). While I don't count on my Blazer for reliability, the thought of giving it away for parts at certain points during my adventure, and being mentally free from its needs has has crossed my mind. I'd be losing $1500 or so, but I can only make more money; not time.
    • still $4.00 85 oct.
    • Always here to help. Discount Code: TIFF5OFF
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...