Jump to content

Dual alternator conversion?

FirstAscent
 Share

Recommended Posts

FirstAscent Enthusiast

FirstAscent

Posted
Posted

Hey everyone,

 

So I know that you can get dual alternators from the factory, mine only has the single, does anyone know what is required to add a second alternator?

 

Is there an existing mounting point for it or does it require a bracket?

I’d imagine a longer belt and the actual alternator as well of course.

 

I’m looking into a not so normal scenario but want a 24v alternator that would charge some 24v lithium batteries completely independent of the truck, so I wouldn’t be tying this into the trucks electrical system whatsoever.

 

First step is to see what it would take to mount the alternator.

 

Oh and if anyone that sees this has the factory dual alternators, post up any photos of where they’re located, thanks!!

 

I have the duramax too btw.

48548 Enthusiast

48548

Posted
Posted

On my 12 I added a second alt but used it too combine with the factory. The newer gm ones use the bcm to tell them when to charge. Yes I had to get bolts and a bracket, idler and longer belt. Also charge wires and i tied into the stock harness with a factory connector to make it charge.. your setup will be different... maybe easier to tie into the stock charging and use an adapter like milwaukee makes for power tools.d5cd440745eb01260449f83354a1cc11.jpg5b17a2058d83e19b4ee858fb988334a4.jpga1ed75c705bf71abeba91ebf585e69d2.jpg385653a7b5129283d439853c2ea7e6d1.jpg1254379d5a41517fb52d0c6a005ab548.jpg469cbe8ba9b437e305650ab2d33f2ebc.jpg6964809528623e6dc139a1713b46f329.jpg325ccb8f42dd008970006d6e36406bdd.jpgec16979ba16f02c83a7e6e684a6e06bf.jpg7530a3f20ba16a5eff8299d6323784ac.jpga75acb7da3bd4c61f6685542f962d0f3.jpgddf3656bc187f68f38b1a88e99f0e1bf.jpg57c55804cc761f62205a5264d43fabd9.jpg

Sent from my SM-N975U using Tapatalk

  • Like 2
Campthewestcoast New Member

Campthewestcoast

Posted
Posted

The problem with 2017 Silverado was the variable voltage alternator I needed full voltage from the alternator all the time to be able to charge my batteries to 100% and send 25 amps to my 12 volt refrigerator 

I used the redarc dcbc1240s and also added solar panels to the travel trailer since I don’t have the option of running propane on the refrigerator while towing

Stand By Enthusiast

Stand By

Posted
Posted

Not to hijack the thread, but similar concern, maybe brainstorming will help all of us. I have the 6.6 custom which has the 120 amp alt. At a minimum, I'm thinking of adding a dual purpose group 29 in the 2nd battery location for rec use or possibility of a plow down the road. I have a group 31 deep cell I could use, but probably wouldn't fit in the OEM location. Was planning on just running them together off the 120. Now, also wondering about adding the 2nd alternator to the engine. Thinking if an earlier version, not requiring input from the ecm could be added, then have it feed the second battery, independant of the primary system. Wondering if an earlier alternator case and pulley might fit in, or if a later one would have to be custom built to eliminate the need for a control module? 

48548 Enthusiast

48548

Posted
Posted

I added a DC power 270 xp. 270 amps max i think 200 at idle. When the computer turns on the factory both turn on and run... it works great. No complaints. I had a new charge wire made 2 Gauge (my bad thought 0 gauge but rated for the amps) but looks factory and added the on battery fuse panel. One alt is hooked up to each battery and with the factory line above the radiator together. I guess you could find an old one wire and run it... dc power can make anything you want... they even have 300amp and more... mine is the hairpin stator model. A local place can make them as well for less. I also have two new agms now... x2 power from batteries plus. Also added a larger ground from the engine.

 

Sent from my SM-N975U using Tapatalk

 

 

 

 

 

 

 

 

 

 

 

 

  • Like 2
redwngr Senior Enthusiast

redwngr

Posted
Posted
On 9/23/2020 at 8:34 PM, Stand By said:

Not to hijack the thread, but similar concern, maybe brainstorming will help all of us. I have the 6.6 custom which has the 120 amp alt. At a minimum, I'm thinking of adding a dual purpose group 29 in the 2nd battery location for rec use or possibility of a plow down the road. I have a group 31 deep cell I could use, but probably wouldn't fit in the OEM location. Was planning on just running them together off the 120. Now, also wondering about adding the 2nd alternator to the engine. Thinking if an earlier version, not requiring input from the ecm could be added, then have it feed the second battery, independant of the primary system. Wondering if an earlier alternator case and pulley might fit in, or if a later one would have to be custom built to eliminate the need for a control module? 

 

 

They keep bumping up the size of standard and available alternators.

2020 HD's the standard alternator is 170A on gas, 220A on diesel   (up from 150A standard on all HD engines in 2019)

 

KW7    Alternator, 170 amps
---  Requires (L8T) 6.6L V8 gas engine.  

 

KW5         Alternator, 220 amps
Trims other than custom --  Included with (L5P) Duramax 6.6L Turbo-Diesel V8 engine or (VYU) Snow Plow Prep/Camper Package. Free flow on (L8T) 6.6L V8 gas engine. 
On Custom -  Included with (VYU) Snow Plow Prep/Camper Package.     

 

KHF         Alternators, dual, 220-amps primary, 170-amps auxiliary
On Trims other than custom -  Requires (K4B) auxiliary battery with (L8T) 6.6L V8 gas engine. 
On Custom -  Requires (K4B) auxiliary battery.

Stand By Enthusiast

Stand By

Posted
Posted
On 9/27/2020 at 12:27 PM, redwngr said:

 

 

They keep bumping up the size of standard and available alternators.

2020 HD's the standard alternator is 170A on gas, 220A on diesel   (up from 150A standard on all HD engines in 2019)

 

KW7    Alternator, 170 amps
---  Requires (L8T) 6.6L V8 gas engine.  

 

KW5         Alternator, 220 amps
Trims other than custom --  Included with (L5P) Duramax 6.6L Turbo-Diesel V8 engine or (VYU) Snow Plow Prep/Camper Package. Free flow on (L8T) 6.6L V8 gas engine. 
On Custom -  Included with (VYU) Snow Plow Prep/Camper Package.     

 

KHF         Alternators, dual, 220-amps primary, 170-amps auxiliary
On Trims other than custom -  Requires (K4B) auxiliary battery with (L8T) 6.6L V8 gas engine. 
On Custom -  Requires (K4B) auxiliary battery.

Thanks for the correction. I meant I had the 220 since mine came with the plow prep.

FirstAscent Enthusiast

FirstAscent

Posted
  • Author
Posted

Thanks for all the comments so far everyone! I had to head out of turn for work and was crazy busy but back to normal life again. I’ll check out these options to see if I can make something work.

I know 24v alternators exist, and dual alternators on these trucks exist, so just need to find the right application for my project :)

Bigwalker Enthusiast

Bigwalker

Posted
Posted

As mentioned previously give REDARC a look,  sounds like the BCDC 2440 or 2450 would give you what you need with out adding a special alternator.  These units are designed for modern variable voltage charging systems. So when your engine battery charge drops to a low voltage the bcdc keeps charging you Auxiliary  batteries at A higher level to maintain a full charge, they also work with solar and shore power, and. An automatically switch and cover all battery types. You can mount the charger close to your li batteries and simply run a large gauge hot lead from your existing battery to the unit. I have used them on my other trucks for several years to solve the variable alternator issues when charging aux batteries. I will be installing one on my 2020 this winter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined

  • Who's Online   1 Member, 1 Anonymous, 1,386 Guests (See full list)

  • Latest Articles

  • Posts

    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...