Jump to content

Recommended Posts

Posted
On 6/6/2024 at 11:52 PM, Newduramaxh*ar said:

What did you do with the open/close harness now that you changed it to a solid window? Im having the same issue, water inside.  Dealer added the silicone already 4yrs ago. Thinking of going with a solid window also.

 

The harness and motor for the slider are still there. I put that all back so that if I or someone in the future wanted to put a slider in, they could do so, no issues.  The defrost has no issues - slider actually has a harness for the left and right sides, that plugs into a single harness defrost plug on the truck side.  The solid window is a single plug that then plugs into the truck-side single defrost plug.  

 

 

  • Like 1
  • 1 month later...
Posted

Same issue here for my 2020 Chevy Trailboss K1500. I haven't taken it to the dealer yet, glad to have the info about the TSB 18NA383 to reference. Anyone have luck with skipping the initial seal and just having the rear window replaced with a solid (non-sliding) one. Just afraid that it will start to leak again after the seal repair. I see definite cracks on the inside, upper part of the rear window and headliner has obvious water damage. 

IMG_0773.jpeg

IMG_0775.jpeg

IMG_0771.jpeg

Posted

UPDATE: Spent my morning playing the round robin tag on (unhelpful) phone calls between GM Customer Service Assistant Center and service manager at the dealership where we purchased the vehicle. I mentioned the TSB Service Bulletin to both and they proceeded to point the finger at each other. GM said that the dealership needs to confirm the issue and that they do not see any recalls or safety bulletins for our VIN. And then the service manager said that we have to bring the truck in to get it diagnosed (diagnosis fee $275), then they have to send the info to GM to see if they will cover the issue, because the 'dealership' is not responsible for covering this repair. It will take 1-3 days to hear back from GM and what their resolution might be. The dealership also telling me that they do not see any recalls or service bulletins on my truck, even though I can distinctly see from photos of the Safety Bulletin that it is what I am experiencing also. So if GM decides that they aren't going to cover it, I am stuck with the $275 diagnosis fee! Why do I feel like they are doing their best to NOT take care of this issue? #GMCustomerService

 

 

Same issue here for my 2020 Chevy Trailboss K1500. I haven't taken it to the dealer yet, glad to have the info about the TSB 18NA383 to reference. Anyone have luck with skipping the initial seal and just having the rear window replaced with a solid (non-sliding) one. Just afraid that it will start to leak again after the seal repair. I see definite cracks on the inside, upper part of the rear window and headliner has obvious water damage. 

Posted
On 7/22/2024 at 10:30 PM, MPMikey said:

Anyone have luck with skipping the initial seal and just having the rear window replaced with a solid (non-sliding) one. Just afraid that it will start to leak again after the seal repair. 

Yes. Save the time and the hassle and have a solid rear window installed like I did. The issue is the plastic frame of the window. It's worthless. If you read enough about this, they'll want to run you through the ringer of fixes like caulking or sealant, then back again for more, then maybe they finally give you another plastic window that'll break in X number of months.  Forget all that.

 

It'll take some explaining to these glass shops, most want only to replace with what you have OEM, i.e. another worthless plastic rear slider window. You'll find one that'll install a solid back window though if you're persistent.    

 

No leaks. Defrost works. Less hassle. Piece of mind.  I live in the Pacific NW, can't have issues with leaks up here.  

  • Like 1
Posted

Thanks for the heads up and glad you were able to get it fixed. We were hoping to skip the sealing stage and just get the solid window. But right now, just jumping through hoops with the dealership and GM to just get the issue confirmed. Gotta love the $275 Diagnosis Fee, with the potential that GM won't cover the repair (even though I referenced the Service Bulletin). UGH! I am sure they can confirm it just fine with the photos that I have! But no, let's make this as painful as possible. We will probably have to go with an outside repair place.

  • 7 months later...
Posted (edited)

40 years since high-mounted 3rd brake lights have been mandated. And GM and Mary Barra haven’t hired an engineer who knows how to design one that doesn’t leak. Never by a GM.

Edited by Guy Fox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Part is $233.87.     Not sure where $900 came from?  
    • Looks like you have it figured out. Did you run a sensor into the rear diff housing?    What sort of diff temp swings would you see towing or not? I have wondered how hot it can get 
    • Dealer just confirmed that GM is "out of AC compressors."  Not sure if all 2019 to 2026 trucks use the same compressor, but a shortage like that is hard to believe.  
    • I think we're reaching the end of constant projects/work.   The water pump bolt appears to have self-sealed, as it's not leaking anymore. I'll take it, and, I'm ready should it self-unseal! I was also getting an oil leak at the front oil pan seal and timing cover and came to find a pan bolt on the corner wasn't even finger-tight. Too easy. And, it was. But, it appears tightening it has reduced a leak producing spots on the ground every time I parked, to just a weep, leaving an occasional dot on the cardboard that lives under it while parked. That's acceptable on a 30 year old engine in my book. I do hate leaks, but, replacing the pan seal is quite the job.   The rear washer line is reconnected and the sprayer works, although getting an intermittent washer fluid drip off the bottom. I think it's just residual...the reservoir filled up the channel in the rear floor and drained down into the upside-down spare tire/wheel. So there are residual puddles all over under there, will wait a few days for it to spill out and dry before I go chasing a potential leak.   The door speaker...no dice. Speaker works just fine, it's that channel in the factory amp that's gone bad. Can't win 'em all. And, whomever buys this will probably tear out the factory radio for something more modern anyway.   I put about 110 miles on it yesterday. Put a lot of wind and heat into it with some mountain driving. Still runs great. Near the top of the pass I got off on a gravel side road and put about 10 miles on with 4hi engaged. Works great.   If ya squint, she's mint! God I wish these were still in production. I can see why they're not. They're rudimentary bordering on agricultural. They began life as a pickup truck and then modern society demanded the rear be enclosed for kids and crap. They're still a pickup underneath, and that gives them lots of ride character, sway and bounce and bump steer. They're alive on the road, and, at least for purposes of nostalgia, it makes driving one a lot of fun.   The Check Engine light did come back on the pass, P0134 for the upstream O2 sensor dropping out. Putting heat into the exhaust causes it after about 10-15 seconds of increased load at higher RPM. The downstream sensor is completely mangled (someone clearly had a rough time removing it, but they didn't replace it?) so I'll just put two in it. For what, mostly to cure the CEL, I can tell the cat is damaged. It's not plugged or fractured, but it's not catalyzing. There's some guilt in not fixing it, but at a cost of $500+, the truck just won't get driven much under my watch. I dislike the smell...running the truck in the shop even with both doors open and the overhead fans blasting, I still reek of pre-cat exhaust. Sticks to clothing and everything else.   Window motor (I'm dreading this), and tires, and that should be about it. 50/50 on Starfire Solarus H/T's, or spending $20 more per tire and going with Cooper Discoverer RT's. I like the look of the RT's a lot more, but is it worth it? I've got a really good (just very old) Toyo Open Country XTX on there now and I like it.  
    • From what I've seen, they "could" sell the switch but designed the assembly such that the switch can't be readily removed and replaced without removing a plastic locating pin.  Sure appears aimed at forcing the end user to purchase a $900 shifter assembly instead of a $20 switch.  Thankfully I still have some extended warranty left...  this one has had warranty repairs almost every 5K miles from the day I bought it.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...