Jump to content

Recommended Posts

Posted

There's a lot of very good oils on the market......the reason I chose Amsoil in particular, was from watching Project Farm on Youtube. This guy does simple, easy to understand testing in his garage. Best part is, he seems completely unbiased, and does these testing videos as a hobby.

 

I love watching car-nerd stuff like this:

 

 

  • Like 1
Posted

Thanks for the input folks.

I know you like your Amsoil. More power to you, but it’s not for me.

Posted
Thanks for the input folks.

I know you like your Amsoil. More power to you, but it’s not for me.

It’s not for everyone, hope everything works out for ya and stay safe!


Sent from my iPhone using Tapatalk
Posted

My take on Bank's and his test.  He is targeting the 3/4 ton an up trucks.  He doesn't have any covers for the half tons.  To me this means the differential is more of a concern since the 3/4 ton and up trucks are worked harder so the rear diff see's more wear and tear.  

  • Like 2
Posted
My take on Bank's and his test.  He is targeting the 3/4 ton an up trucks.  He doesn't have any covers for the half tons.  To me this means the differential is more of a concern since the 3/4 ton and up trucks are worked harder so the rear diff see's more wear and tear.  

I’d have to agree with you. I’m not falling for his marketing though. Yes, engineering design is everything but my G2 is angled inside, he’s focusing on square tubs. I immediately found on his design a major flaw, 3/4 tons already have very low rear diffs, his drops even lower in order to spoon for extra airflow easily capturing road debris, packing up thus eliminating the ability to have his intended air cooling. But, the worst thing about it is it’s an accident just waiting to happen, piss poor to low of a design easily damaging if not destroying your rear Diff along with stranding you in the middle of no where.

By the way, all Diff Covers, no matter the design cannot stop aeration from happening as it’s one thing to making a marketing video while the vehicle is up in the air and gears turning, it’s completely different while driving and vibrations causing serious jarring within the Diff cover. Compare the G2 to a Banks, see for yourself that the G2 is a better design as it’s curved but tucked in without creating caking up from road debris or the serious weak points as the Banks reaches out looking for something to wack while driving.

My experiences are based off of many years of excellent experiences on lots of 4x4’s with G2 Gear and axle. I actually OffRoad every weekend and that Banks Diff Cover would’ve gotten me stuck either by embedding itself on something or snapping off destroying my rear end.

Good luck to everyone and God Bless!

[emoji631][emoji631][emoji631][emoji631]TRUMP2020[emoji631][emoji631][emoji631][emoji631]


Sent from my iPhone using Tapatalk
  • Like 1
Posted
1 hour ago, Black02Silverado said:

My take on Bank's and his test.  He is targeting the 3/4 ton an up trucks.  He doesn't have any covers for the half tons.  To me this means the differential is more of a concern since the 3/4 ton and up trucks are worked harder so the rear diff see's more wear and tear.  

I did ask them last week through their chat function on the website about covers for the 1500's.  They said that they are working on them.  We'll see how important us small truck owners are to Mr. Banks...

 

I am one of those who pushes my 1500 to near it's limit.  I like to make improvements, albeit small ones, to my 1500 to make it the best it can be.  I started looking at covers with a drain plug to ease future fluid changes then started looking at how I can get a better functioning cover at the same time. 

 

@Black02Silverado - I currently do not have an Amsoil contact, can you tell me if there is an advantage to choosing a dealer online vs finding a local dealer?  Feel free to get back to me in a pm if you'd rather. Thanks!

Posted
16 minutes ago, UnlimitedMatt said:

I did ask them last week through their chat function on the website about covers for the 1500's.  They said that they are working on them.  We'll see how important us small truck owners are to Mr. Banks...

 

I am one of those who pushes my 1500 to near it's limit.  I like to make improvements, albeit small ones, to my 1500 to make it the best it can be.  I started looking at covers with a drain plug to ease future fluid changes then started looking at how I can get a better functioning cover at the same time. 

 

@Black02Silverado - I currently do not have an Amsoil contact, can you tell me if there is an advantage to choosing a dealer online vs finding a local dealer?  Feel free to get back to me in a pm if you'd rather. Thanks!

Matt,  no advantage per say going local or online.  Local you might be able to get product from a dealer as you need it.  I do know that some don't stock product and some do.  

 

Having me as your servicing dealer you help support this forum since I'm a sponsor.  

 

Also if you plan on using AMSOIL in the future, then becoming a Preferred Customer is the way to go.  That way you get everything at the wholesale price plus benefits of promotions that AMSOIL puts on at times.  You also get points every time you make a purchase and those points can be used for future purchases.

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I would be surprised if the diff's were not filled (with the cheapest gear lube) at the axle factory before being shipped to GM.  If you ever watched them building trucks they install the axles and all suspension parts with the frame upside down and then turn it over before its time to install the engine.     Too much gear lube in a axle can be worse than not enough especially with a lower quality GL where is get whipped up with entrained air (foam)  weakening its ability to lubricate.        
    • This is the 6.6 gasser section of the forum, you should either delete or modify your previous post as it is misleading for anyone looking for factual information on their 6.6 gas engine.
    • Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
    • He has his dad’s newer truck he’s put away. He has several old cars he rotates between him and his family. I’ve seen a restored square body and a SS Chevy truck he’s sometimes drives. He did raffle off a new suburban recently. As much as he is watched if he drove new stuff as a rule we’d know it. It would be fine by me. I don’t care what people prefer. I got one more new one in me. I’d rather my wife get one. I can’t get her out of the Genesis. Don’t tell anyone. I want her to get an electric truck. I want to put a generator in the back. Just because. She hasn’t bit yet.
    • Yes, you must have seen my thread on the Blazer. HOT GARBAGE, but I love them anyway. I'm convinced every car guy has a soft sport for an S/T series somewheres. Probably even a Panther too, if I'm being an honest car guy. That doesn't mean they aren't junk. And they definitely don't get better with age. I sometimes play with old cars, but that's by choice. I don't rely on them and they aren't my everyday fleet.   Derek plays the common man on Youtube and that's no doubt where he started. Now he has Youtube money (and Motortrend, etc). You think his crews and his wife ride around in old beaters when they're chasing him and his wrecks across the country? No he's got newer and nicer stuff for that, you'll see glimpses of it in the footage.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...