Jump to content

Power Steering Fluid Reservoir location, 2020 5.3l V8

Coastie
 Share

Recommended Posts

Coastie Enthusiast

Coastie

Posted
Posted

Truck is steering unusually tight today, tire pressure is good. Figured I'd check the power steering fluid level under the hood.

I can't find the reservoir/dip stick location. The manual talks about it, but does not show a location in the engine compartment for that motor.

Is it there someplace, if so where, or is this not a user serviceable fluid on a 2020 5.3l Sierra ?

RWTJR Enthusiast

RWTJR

Posted
Posted
45 minutes ago, Coastie said:

Truck is steering unusually tight today, tire pressure is good.

 

Check to see what driving mode you are in. The different modes will change the responsiveness and feel of the steering.

newdude Senior Enthusiast

newdude

Posted
Posted (edited)
2 hours ago, Coastie said:

Truck is steering unusually tight today, tire pressure is good.

 

Is it cold where you are?  The electric assist systems in these trucks get a touch on the stiffer side when cold, and that is normal of them.  Goes away after a couple minutes or so.    

Edited by newdude
Coastie Enthusiast

Coastie

Posted
  • Author
Posted

Was in Normal mode...

It's cold for Alabama was lower 60s at the time. I only went a couple miles.

I'll see if it continues on a normal trip, thanks all, I learned some things today.

redwngr Senior Enthusiast

redwngr

Posted
Posted

The HD's still use hydraulic steering.

They get the same manual, so it has power steering reservoir references -- but only for the 6.6L gasser.  

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • pyoung62
      2026 DENALI 6.2L

      By pyoung62 · Posted

      I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • ShowMeShooter1332
      Can you add a 360° Cameras hard button to a 2021 Sierra?

      By ShowMeShooter1332 · Posted

      I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Grumpy Bear
      Winter Returned

      By Grumpy Bear · Posted

      Looks like the entire state is burning. 😬
    • Chuck FB
      Oil Consumption

      By Chuck FB · Posted

      Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • CPhelps
      4 Wheel Drive System

      By CPhelps · Posted

      Cool to see another Vermonter!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...