Jump to content

My (potential) headlight fix...

ajs67donzi

By ajs67donzi
in Modifications & Accessories

 Share

Recommended Posts

ajs67donzi Enthusiast

ajs67donzi

Posted
Posted

After poring through the various options for a headlight improvement, one thing became certain...I'm not going to tackle this myself!

 

So, I found an audio shop in Richmond who, interestingly, also specializes in lighting...specifically headlight modifications. The guy I spoke with sounded familiar with the GM problem during these years, and explained the fix they use: GTR Ultra 2 LED bulbs, $200 for a pair and $95 labor.

 

I don't mind the price, considering it my punishment for not doing it myself, but I'm wondering if this will give me a dramatic headlight improvement.

 

Has anybody tried this modification and, if so, are you happy with the results?

laughey Enthusiast

laughey

Posted
Posted

My experience - I was in the same boat as you (and many others) and originally went Hylux/Morimoto HID 5000K...along with Morimoto XB fogs. HIDs required cutting into/through the headlight housing "caps" and mount the ballasts...hindsight being 20/20, it was silly doing all that "customizing". The light pattern for the HIDs was great, brightness far better than the OEM garbage, but I eventually started experiencing "light out" issues on the passenger side (airbox). All was great/fine for about a year or so and then nothing but issues (1-3x week). In the end, I transitioned to SV4 LEDs (from Headlight Revolution). Although I inquired about the GTRs, HR suggested SV4s instead...I can't remember the exact reason(s) for such, but I'm happy with the purchase. Going into it, the biggest question I had was whether or not I needed anti-flicker modules with the SV4s...the response I got from HR was, "umm, maybe". I went forward without them and, I bet correctly...turns out I didn't need them...and that's a good thing. There's not a whole lot of space inside the projector housing and needing/using the anti-flickers would've meant having to keep the "caps" with holes cored through, mounting outside the housing, etc. With a simple adjustment to the bulb collar (they have to be positioned vertical when locked in), I was able to tuck everything into the housing and go back to full/complete caps (no holes).

 

At this point, been going over a year (I put roughly 20K miles/year) and with my headlights being DRLs as well, I've had no problems. Light output is as good, if not better than the HIDs, but more importantly to me, the SV4's color output is closer to the Morimoto XB LED fogs than the HIDs were.

 

A few things to make note of:

 

~ Make sure to position/align the LED bulbs properly within the housing, else you won't get the proper light pattern or maximum brightness

~ Be sure to re-aim the headlights...sounds crazy, but going from OEM to HID to LED, I had to re-aim the headlights each time. OEMs were aimed properly, but when I moved to HIDs, I had to lower them considerably. Moving to LED, I had to lower one and raise the other (very odd).

 

In the end, I'm (one of many) more than satisfied with the light output of anything not halogen on these rigs.  :0)

 

Good luck!

 

ajs67donzi Enthusiast

ajs67donzi

Posted
  • Author
Posted

Thanks a ton for the detailed reply.

I'm having this done at a shop, so I will make sure they properly aim the LED's after installation.

I'm anxious for this to be done, as the OEM halogens truly are garbage!

cbrsilv15 Senior Enthusiast

cbrsilv15

Posted
Posted

You’re paying someone almost $100 to plug in some bulbs?? Whoa.

 

What year and model truck do you have? Putting led bulbs in a reflector halogen housing will blind other drivers. The Morimoto 2stroke 3.0 are designed for halogen housings because you can tweak the bulb to reduce glare. A proper retrofit will have the best output, but it’s generally more money.

 

 

Sent from my iPhone using Tapatalk

ajs67donzi Enthusiast

ajs67donzi

Posted
  • Author
Posted (edited)
On 12/14/2020 at 6:43 PM, cbrsilv15 said:

You’re paying someone almost $100 to plug in some bulbs?? Whoa.

 

What year and model truck do you have? Putting led bulbs in a reflector halogen housing will blind other drivers. The Morimoto 2stroke 3.0 are designed for halogen housings because you can tweak the bulb to reduce glare. A proper retrofit will have the best output, but it’s generally more money.

 

 

Sent from my iPhone using Tapatalk

Truck details are to the left of this sentence...

 

From what I've read, "blinding other drivers" only occurs when a headlight system is incorrectly modified.

That's another reason I'm hiring technician's with experience.

 

The shop labor charge includes some dismantling on the passenger's side, accurate re-alignment, and the lifetime warranty on the bulbs. Worth it, to me, but your MMV.


 

 

 

Edited by ajs67donzi
ajs67donzi Enthusiast

ajs67donzi

Posted
  • Author
Posted

The shop is Extreme Audio, in Mechanicsville, VA.

Reviews are good, including the several I've read on headlights.

I'll post my results here, after the late December appointment date.

KWD2 Enthusiast

KWD2

Posted
Posted

I DIY everything I can.  There is no lack on knowledge on the things I outsource those are mostly lack of specialized tools and a lift.  It is really not a hard job to replace the bulbs your self but I guess the Lifetime warranty and "if they break it they replace it" is a plus  

TheGreatOne Enthusiast

TheGreatOne

Posted
Posted

I've had the same problem.....all I want to do is upgrade the bulb from boring yellow orange to a more whiter blueish tint.  But I can't find anything for my ltz projector headlights.  Everything requires some extra BS or I read that people have problems after 6 months to a year with.  Just want the bulb to be whiter lol

cbrsilv15 Senior Enthusiast

cbrsilv15

Posted
Posted
I've had the same problem.....all I want to do is upgrade the bulb from boring yellow orange to a more whiter blueish tint.  But I can't find anything for my ltz projector headlights.  Everything requires some extra BS or I read that people have problems after 6 months to a year with.  Just want the bulb to be whiter lol

There’s a pinned thread about headlight mods. Check it out. Tons of useful info in there.


Sent from my iPhone using Tapatalk
TheGreatOne Enthusiast

TheGreatOne

Posted
Posted
5 hours ago, cbrsilv15 said:


There’s a pinned thread about headlight mods. Check it out. Tons of useful info in there.


Sent from my iPhone using Tapatalk

Thanks.....I have seen the thread....nothing that helps me with my projectors.....either I have to mod the housing or they don't last long or countless other complaints.....haven't heard any positives with anyone about the projector bulb

J_Bone Enthusiast

J_Bone

Posted
Posted
8 hours ago, TheGreatOne said:

Thanks.....I have seen the thread....nothing that helps me with my projectors.....either I have to mod the housing or they don't last long or countless other complaints.....haven't heard any positives with anyone about the projector bulb

If I'm not mistaken, the LED's require no mods? I've been checking multiple sites and they are simple install with just alignment of the bulb inside the projector and then cutoff height. 

  • Like 1
doubeleive Enthusiast

doubeleive

Posted
Posted
10 hours ago, TheGreatOne said:

Thanks.....I have seen the thread....nothing that helps me with my projectors.....either I have to mod the housing or they don't last long or countless other complaints.....haven't heard any positives with anyone about the projector bulb

I put in the distantxtremes hylux balllast's and bulbs in my HID projectors and have had no issue's, I did have one problem that was own fault due to a loose ground, they are sold out but I have found the same ballast's and bulbs on ebay, it has to come from China so there is a wait but the quality is good and the price is slightly less than distant's price

ballast

https://www.ebay.com/itm/2pcs-Hylux-50W-2A50-Canbus-Ballast-HID-Xenon-Kit-for-Headlight-Replacement-Bulb/113685340851?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

bulbs

https://www.ebay.com/itm/2X-Xenon-35W-D5S-5500K-HID-Headlight-Light-Bulbs-Replacement-Conversion-Kit-Lamp/254808203359?_trkparms=ispr%3D1&hash=item3b53c0a05f:g:70sAAOSwSA5eIY-d&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%2Fn%2BzU5L90Z278x5ickkrDx%2B2NLp21dg6hHbHAkGMUF1QgweGobKZtFkJ7jgaN9JkDdOjNSC5bwcHSX7aX7v5r3w6tee7URUxMl8d1BTr2MN3vJlhbvA09bDkxm8Btq7hvddQfeQ%2BuwP%2FXH08b03vevk9r4n6RvfRvxHnKBHv5xQey8h%2F6o%2BrdDmWvdX0ihssKwKPVIdefPJYEU4JD4lLLzkTCLCc55Rp8z%2B0m62EVDsZzThFApLEByMidGQiFGCO7uoyFwZyUzyqmOzroTDfGDFZ21qX3GwhWwdrLoUNRqvJYveHD4W7D%2B7wcRu7j8Y%2FS1MvO62Rm13ULwWu6ZZtz1LBMPL%2Bcfdi3LxLvh6jD1h3ywQRO5MP38Tz33y6J0vOf3AneSF6BRdhTR5dvGdoWtKCasce6GCOjmqBBzcRsZ92Vjx22ntSNO9Dkocd984zwHcDE%2BM0mwNj26GSJirYZbnww4NTVKQnwCzMj1Xgr%2B77as%2Br9pxf%2FTE5cV3AdVrbc4LhDduluwiye25atw4l3DLTUG5yE2XelJS94c9gmqKhc0nKXf3j1DFL3wfKVNHNmOTkXrOqBAGijc93KSK8TcfnVhorqvb3P4JZfjTeott9B5W%2FGexF%2FOGFONL7smpFaXCVJgAC7tq1fUEx1valmUvObjM4LQa%2BRYfQyOEP%2BHJ1ghRZR7s%2BLTR6VPWWc5DRFlfatMuwWG5ssDqk8BYzorz3KgAHHu%2B7OeURHKyfBcO9Bv0uM3v12%2BJ7tKY3kWAdWwbF7S4UqY9VPsPkDwZ8Togw8CLPXiut5Un92kdYA%3D%3D|cksum%3A25480820335942743dbdf46c4ed9bf9f290c8a4af4d1|ampid%3APL_CLK|clp%3A2334524

then you just need a harness kit, I would get 2 of these and run separate relays one for each side, a little wiring experience is needed because this is just a generic kit

https://www.ebay.com/itm/Xenon-HID-Conversion-Kit-Relay-Wiring-Harness-Wire-Upgrade-H1-H3-H16-5202-D2R-D2/362001250571?epid=2129985236&hash=item5448f4b90b:g:WP0AAOSwGJlZKt11

the key is to use good quality ballast's and wiring, bulbs seem to hold up no matter what the brand but I would try to stay away from the cheapest ones out there regardless

  • 4 weeks later...
15KSChevy Enthusiast

15KSChevy

Posted
Posted

ill sell you my h11 xenon depot 5500k kit and my xenon depot 9005 high beam led kit, i had it in my truck with projectors. was awsome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined

  • Who's Online   3 Members, 0 Anonymous, 417 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • nfisherman
      Software Update

      By nfisherman · Posted

      Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...