Jump to content

Recommended Posts

Posted
1 hour ago, Jacob Moody said:

Great looking truck, I love the color matched fender trim! What shocks are you running?

Belltech street performance

Posted
On 1/5/2021 at 11:54 AM, Jacob Moody said:

I had some vibration because my truck did not have the 2 degree shims from the factory. I located some and installed them yesterday and it improved quite a bit, but there is still some vibration at 60mph+. My kit came with 2 transmission spacers with the recommendation to install the thicker of the 2. I am probably going to put the thinner one in and see if that works.

 

And no, I forgot to measure my truck before I dropped it. But, here is a before pic...

 

806588185_2020Sierra_1.thumb.jpg.b6dbf472c8c2128fb90ea69b96832a37.jpg

This is what i am afraid of, I want to drop 1-2" but the few people that have vibration issues scare me enough not to do it. 

Posted

Both trucks look awesome gentleman. Love the look. This is how my SS Trailblazer looked. Nice and level and menacing looking. 
You have the wheels spinning in my head to do this to my High Country

This is also what GM should over from factory for us guys that dislike “lifted” trucks. Not my cup of tea. I prefer it you guys have it. Great job

A double cab supercharged 5.3 10 spd

A crew cab supercharged 6.2  10 spd

 both with paddle shifters 

 

Id sign on the dotted line!  Anyone else

 

  • Like 1
Posted

Maxtrac and Belltech shocks side by side, the Belltech has a larger shock body and the collars fit the mounts better:

 

Shocks.thumb.jpg.48a8dcfe76fcb233898a8b7a87afcba8.jpg

Posted
3 hours ago, Jacob Moody said:

Maxtrac and Belltech shocks side by side, the Belltech has a larger shock body and the collars fit the mounts better:

 

Shocks.thumb.jpg.48a8dcfe76fcb233898a8b7a87afcba8.jpg

You just replaced the rears or the fronts too ? How noticeable was the ride improvement ?

Posted (edited)
41 minutes ago, 808 HI said:

You just replaced the rears or the fronts too ? How noticeable was the ride improvement ?

So far yes, but I went ahead and ordered the front struts too. The stock front end is way too bouncy. The Belltech shocks are much better than the Maxtracs.

Edited by Jacob Moody
Posted
9 hours ago, KriptiK said:

IHC 3/5 on 22’s

8053F1A2-C8AF-44FD-AD98-B1310317CACE.jpeg

Nice truck!! Love the look

  • Like 1
Posted
On 1/6/2021 at 5:42 PM, TNTSilverado said:

Both trucks look awesome gentleman. Love the look. This is how my SS Trailblazer looked. Nice and level and menacing looking. 
You have the wheels spinning in my head to do this to my High Country

This is also what GM should over from factory for us guys that dislike “lifted” trucks. Not my cup of tea. I prefer it you guys have it. Great job

A double cab supercharged 5.3 10 spd

A crew cab supercharged 6.2  10 spd

 both with paddle shifters 

 

Id sign on the dotted line!  Anyone else

 

 

Did those wheels come factory on your truck?

 

P.S. As a former Typhoon and Syclone owner and current G8 GT owner, I would like another sport truck offering as well :)

Wife has the new blazer RS and now I'm hearing there is a possible Blazer SS coming. My guess V6 turbo but a supercharged 5.3 would be nice.

 

Posted
14 minutes ago, Gwill30 said:

 

Did those wheels come factory on your truck?

 

P.S. As a former Typhoon and Syclone owner and current G8 GT owner, I would like another sport truck offering as well :)

Wife has the new blazer RS and now I'm hearing there is a possible Blazer SS coming. My guess V6 turbo but a supercharged 5.3 would be nice.

 

Yes, those are the factory 20" wheels that come on the Elevation edition.

 

I've always wanted a Syclone or Typhoon! I settled for putting a 350 in GMC S-15 about 25 yrs ago, that was a fun truck!

You could always do this: https://www.topspeed.com/cars/gmc/2021-gmc-canyon-syclone-by-specialty-vehicle-engineering-ar188745.html

Posted
1 hour ago, Gwill30 said:

 

Did those wheels come factory on your truck?

 

P.S. As a former Typhoon and Syclone owner and current G8 GT owner, I would like another sport truck offering as well :)

Wife has the new blazer RS and now I'm hearing there is a possible Blazer SS coming. My guess V6 turbo but a supercharged 5.3 would be nice.

 

No, I called a wheel shop in town that trades out and I traded my factory HC 22s for these and $500 cash. He also gave me 3 years of warranty on chrome inserts. 
 

yes I drove the new blazer RS and it was awesome. I needed a third row so I got the new Acadia with same motor and transmission. And it hauls for a small suv. Wife loves it
 

I would love for GM to give us another SS sport truck. They need to get back into the game. They have the ZL1 camaro motor that would fit just nicely in the engine bay

Posted
1 hour ago, Jacob Moody said:

Yes, those are the factory 20" wheels that come on the Elevation edition.

 

I've always wanted a Syclone or Typhoon! I settled for putting a 350 in GMC S-15 about 25 yrs ago, that was a fun truck!

You could always do this: https://www.topspeed.com/cars/gmc/2021-gmc-canyon-syclone-by-specialty-vehicle-engineering-ar188745.html

 

 I have had a few of those as well. 82 GMC jimmy 406 , 91 s10 383.

My boys are getting to the driving age and love to go to the drag strip. I thought about doing another s10 for them but the G8 fell into my hands at a decent price so I stroked the motor, added some compression. They can beat up on that at the track.

 

I seen that syclone but didn't see a price :). I figure it was "If you have to ask you cant afford it " LOL

 

 

Posted
38 minutes ago, TNTSilverado said:

No, I called a wheel shop in town that trades out and I traded my factory HC 22s for these and $500 cash. He also gave me 3 years of warranty on chrome inserts. 
 

yes I drove the new blazer RS and it was awesome. I needed a third row so I got the new Acadia with same motor and transmission. And it hauls for a small suv. Wife loves it
 

I would love for GM to give us another SS sport truck. They need to get back into the game. They have the ZL1 camaro motor that would fit just nicely in the engine bay

That is awesome. Those wheels are growing on me. There was a new high country Tahoe at the dealership I picked up my truck from and it had those wheels. 

 

I think I'm either going to try and find a set of these or the all black snowflakes.

 

Our older boys are turning 16 this summer so we were able to down size to the blazer but prior to the blazer it was  Tahoe-Denali-Suburban-Escalade.  That 4 kid lifestyle   LOLOL.

 

I had a new impala as a loaner and was very surprised with the HP of these v6's. 

Posted (edited)

IHC 3/5 on 24" dubs, planning to do a 4/6.

CA6EB9B5-D58B-44FC-9DE8-80CB6FAA376F.thumb.jpeg.3aaff623d45ae8380f25549888aa88a8.jpg.01fc55dd86cd091b392953e044e0ac53.jpg

 

Edited by 808 HI
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,804
    Total Members
    8,960
    Most Online
    LCH14
    Newest Member
    LCH14
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,570 Guests (See full list)


  • Latest Articles

  • Posts

    • 对于 8L90 来说,198°F 并不算异常高,所以我认为仅仅是温度并没有造成这个问题。 由于卡车停放几天后一切恢复正常,因此在认定变速箱本身发生故障之前,我会先检查是否存在间歇性的电子或液压控制问题。 我首先会扫描变速箱控制模块(TCM),而不仅仅是发动机控制模块(ECM)。通用汽车的变速箱可以存储厂商特定的故障码或历史故障码,这些故障码不会触发发动机故障灯。 我会检查: TCM历史记录和待处理的DTC 指令装备与实际装备 管路压力 换挡电磁阀状态 液力变矩器离合器(TCC)打滑 变速箱油温 如果再次发生这种情况,请尝试在重新启动点火开关之前捕获数据,因为有些间歇性故障在重新启动后会消失。 使用支持通用汽车变速箱全面诊断的专业扫描工具,这项工作就容易多了。例如,Foxwell NT809BT可以访问变速箱控制模块 (TCM),读取制造商特定的变速箱故障代码,并显示基本 OBD-II 读取器无法提供的实时变速箱数据: https://www.foxwelldiag.com/products/foxwell-nt809bt 希望只是间歇性的控制问题,但在更换任何部件之前,我肯定会先读取变速箱控制模块(TCM)的数据。
    • The 92-95 SCPI spider injectors are notoriously problematic and hard to source new replacements. I’d pull the intake manifold first to inspect cracked lines and brittle plastic legs before dropping $350 on a rebuild. The 1.5 OBD system only offers limited data, no misfire tracking, which is normal for this 1995 model. Enjoy the project!
    • Yea a fluid change is in order here. Honestly, your transmission didn’t even get hot. During the summer in stop and go traffic I’ve seen my 8l80 get up to 216 and it was still shifting smoothly. 
    • I'd change the fluid and start there.   198F is nothing for the 8L90.  They typically operate 180-200F stock.  
    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...