Jump to content

Recommended Posts

Posted

Curious, what are you all use this for? I know someone will say you can use for anything like charging your phone or anything.. I'm just curious what do people actually use it for. I know of the summer I try to use it one time and I believe it was giving less power than I hope. The device complain about that port.

 

 

Posted
2 hours ago, jaimeastin said:

Curious, what are you all use this for? I know someone will say you can use for anything like charging your phone or anything.. I'm just curious what do people actually use it for. I know of the summer I try to use it one time and I believe it was giving less power than I hope. The device complain about that port.

 

 

I know that some have used it to connect to their phone, mounted on the left side of the steering wheel.  But with mine, in my 15, I ran the USB cable into my center console, since I didn't have one in the glove box.gallery_151133_4800_1249650.thumb.jpg.28ea7ea39f5ecd4f7738daf48d959966.jpg

  • Like 1
Posted

I've got a 128 GB USB stick with all of my music on it plugged into the glove compartment.  It never comes out except to take it in the house to add more music.

  • Like 2
Posted (edited)

Similar to above, I have a cable run from the glovebox, under the dash and out through the fuse panel to my phone mount above the headlight switch. 

Edited by johnnychuttz
  • Like 1
Posted
Quote

I've got a 128 GB USB stick with all of my music on it plugged into the glove compartment.  It never comes out except to take it in the house to add more music.

So how do you play the music on the stick drive?

Posted
5 hours ago, Salsa De Piña said:

I've got a 128 GB USB stick with all of my music on it plugged into the glove compartment.  It never comes out except to take it in the house to add more music.

Mine's in the center console, since I don't have a USB in the glove box.

1 hour ago, 2speedbump said:

So how do you play the music on the stick drive?

I play mine through the "Media" side of my radio, similarly to playing music off my phone via a USB cable.

  • Like 1
Posted
1 hour ago, 2speedbump said:

So how do you play the music on the stick drive?

What he^ said. Hit the media button until it says USB (or maybe whatever the USB's name is, I can't remember.) Then you can search by song/album/artist.  You can also use voice recognition by saying "Play song" or "Play artist" then, when prompted, the name of the song/artist. It does a decent job of getting it right. 

  • Like 1
Posted
14 hours ago, Salsa De Piña said:

What he^ said. Hit the media button until it says USB (or maybe whatever the USB's name is, I can't remember.) Then you can search by song/album/artist.  You can also use voice recognition by saying "Play song" or "Play artist" then, when prompted, the name of the song/artist. It does a decent job of getting it right. 

Thanks, I'll have to give that a try.  I have never had any luck using a USB stick for anything yet including copying my waypoints.

Posted

Ditto on the music (thumb drive). Mine too remains in the glove box.

Posted (edited)

I am, now, using it for my once disliked CPLAY2air

for wireless connectivity to my iPhone.
For some reason, the device actually works much better than when I had it plugged into the console USB.
Go figure, who knew?

Edited by MikeBMW
  • Like 1
Posted (edited)
3 hours ago, pixelmonkey380 said:

dash camera.

 

cable above the headliner, down the A pillar, and behind the dash. plugs into the outlet there and works great. out of sight, out of mind.

That is an awesome use for it!
If I had not already repurposed mine for the aforementioned reason, I would do that for a better dash cam install.
Instead, I have my dash cam wired as you mention, but going behind the glove box to a USB adapter in front of the console.

Edited by MikeBMW
Cats on my lap disrupt my typing, at times
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   5 Members, 1 Anonymous, 2,187 Guests (See full list)

  • Latest Articles

  • Posts

    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...