Jump to content

Recommended Posts

Posted

Considering a 2021 LTZ 4WD Z71 w Technology Package:

 

1.  How much more does it cost to replace a HUD windshield?

 

2. BORA does not offer their loudest exhaust for the 5.3L, any other options with the Z71 exhaust (under bumper)?

 

Thanks,
Rick

Posted

Afaik, it's the same windshield.

 

HUD info is projected from a unit in the dash. 

(similar to the small unit that projects the dots on the forward collision warning, but a larger projector) 

 

HUD was one of those options that I figured was just a gimmick.

Turns out it's a 'gimmick' that I'd like on them all....

 

  • Like 1
Posted

Dunno what they cost but they are definitely different. Mine has “HUD” stamped on it. A normal windshield would reportedly cause minor ghosting of the HUD image. 
 

58B9C6B6-D761-4BDA-9308-CFB46065502B.thumb.jpeg.98b74466a19f101e6863721e01993bc7.jpeg

 

  • Like 2
Posted

Generally for most people the windshield is free.  Carry a $0 comprehensive and whatever for your collision.  Windshields are almost always comprehensive coverage just insist on OEM.

  • Like 1
Posted (edited)

Windshields are safety feature/HUD specific.  There's one for no HUD/forward collision, and there this the HUD/forward collision one.   

 

HUD windshield retails for about $600.

 

Corsa's Sport line packs a good punch with no drone.  Here's mine on my 2019 old body 5.3:

 

2014-2018 and 2019 "LD" Silverado/Sierra Corsa Sport Exhaust Demonstration - YouTube

Edited by newdude
  • Like 1
Posted (edited)
3 hours ago, OnTheReel said:

Dunno what they cost but they are definitely different. Mine has “HUD” stamped on it. A normal windshield would reportedly cause minor ghosting of the HUD image. 
 

58B9C6B6-D761-4BDA-9308-CFB46065502B.thumb.jpeg.98b74466a19f101e6863721e01993bc7.jpeg

 

Thanks for the  info/correction! 

 

Seems all reflections aren't created equal.

Edited by redwngr
Posted
9 hours ago, redwngr said:

Afaik, it's the same windshield.

Incorrect

  • Like 1
Posted
On 4/12/2021 at 10:49 AM, Koppster said:

Considering a 2021 LTZ 4WD Z71 w Technology Package:

 

1.  How much more does it cost to replace a HUD windshield?

 

2. BORA does not offer their loudest exhaust for the 5.3L, any other options with the Z71 exhaust (under bumper)?

 

Thanks,
Rick

For the exhaust, the most cost effective option would be to cut out the muffler, resonator, and the flapper, and then add a y-pipe for dual exhaust out the back.  I'd recommend leaving the cats on as I did.

 

I did this on my previous 2014 5.3L and it sounded great.  Here's a link to an old video of a cold start of my truck.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,921
    Total Members
    8,960
    Most Online
    Enduro73
    Newest Member
    Enduro73
    Joined
  • Who's Online   5 Members, 1 Anonymous, 1,387 Guests (See full list)

  • Latest Articles

  • Posts

    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
    • Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...