Jump to content

Recommended Posts

Posted

I own a 2020 Silverado 2500 LTZ.  I have the optional chrome wheels on the truck and 275/65R20 tires.  A friend of mine recently purchased new wheels and tires for his 2020 Sierra 2500 AT4.  I've been wanting to put some black wheels on my truck for a while now.  He gave me the wheels and tires for my truck.  Can't beat THAT price!  I do have a couple of questions though.  First, will going from 275/65R20 tires to 275/70R18 cause me any major issues?  I've calculated the total diameter difference to be 0.9 inches.  Anyone know if the speedometer and/or odometer will be totally off because of this?  Secondly, does Chevrolet sells replacement plastic center caps that would fit a GMC wheel?  It's pretty blacked out, but I'd rather not have a GMC logo on a Chevy truck.  Just looks kinda weird in my opinion.  Any help is greatly appreciated.  Thanks. 

Posted (edited)

you are going to an inch smaller tire. the speedometer will read faster. 

on my truck, and others I have heard of, the speedometer calibration for the 275/65-20s is fast already. 

I put a 295/65-20 (1" taller) tire on my truck and now my speedometer is dead accurate with GPS and roadside radar.

 

as far as the cap, depends on the wheel. but i know gm makes black caps in both the GMC and Chevy flavors for certain wheels. I have seen guys swap caps and do exactly what you want to do

Edited by kylant
  • 6 months later...
Posted

I swapped my stock 275/75r17 tires for new wheels and 295/70r18 tires,which are quite a bit bigger, on my new 2022 2500 hd . And at 75mph on the Speedo gps says I’m going 78 mph. I’d assume that the faster your going a little more it would be off

2329242A-2CA2-45CD-9E19-63D163D1A465.jpeg

Posted

Using the mile markers of a marked 5 mile highway speedometer test section, my 2021 3500hd with stock Michelin 18s seems to be almost dead on accurate. At 5 miles the number flipped about 100 feet after the marker. That’s just under 1/2% error. 
 

I have not been able to find out if there is a different calibration on trucks delivered with 20 inch wheels. 

  • 9 months later...
Posted

Sorry to revive an old thread but I didn't find anything more recent and on topic.

 

I recently swapped my stock 17" LT wheels for a takeoff set of 20" LTZ wheels.  I purchased them from a place that deals in takeoff stock wheels for a variety of makes.  I had the TPMS programmed at the time, and I assumed I could have a dealer change/correct the tire size to another stock size, 2 dealers I called said they can't do this on the current generation trucks.

 

Since I installed the 20" set I have been using a gps speed app on my phone part of the time I am driving and some of the time the speed is correct and some of the time it is off nearly 10% which is what I expected, as in one day it might match the app dead on and the next day I am going 10% faster than it reads.  What is everyone doing to correct this or at least have it be consistent?

Posted

I recall in another thread someone mentioned that there is a different software setting for the different optional tire sizes to make the speedometer accurate. You are going from one factory size to another factory size. I’d suggest asking the dealer if it is something they can reset for you for not too much money. 

Posted

I contacted 2 dealers today and both said that they can’t change the tire size even though I am trying to go from one stock size to another, so I was wondering if anyone had the same experience.   I can buy an aftermarket module to perform the calibration/adjustment, but I thought I had read that the dealer can change it to another stock size so I wanted to prevent adding hardware if possible.  

  • 8 months later...
Posted

I just changed my wheels and tires on my 2022 GMC AT4. I went from the OEM 20” wheels with Goodyear Territory MT LT265/60R20 to Toyo Open Country A/T III 35x12.5R17LT. The dealer said no can do for relearning the TPMS on a aftermarket tire. I purchased the tires & wheels from Custom Offsets, and they said the TPMS should relearn themselves after around 250 miles which hasn’t happened yet.

20230514_162857.jpg

20230525_150538.jpg

Posted
On 5/25/2023 at 2:36 PM, Poopster said:

I just changed my wheels and tires on my 2022 GMC AT4. I went from the OEM 20” wheels with Goodyear Territory MT LT265/60R20 to Toyo Open Country A/T III 35x12.5R17LT. The dealer said no can do for relearning the TPMS on a aftermarket tire. I purchased the tires & wheels from Custom Offsets, and they said the TPMS should relearn themselves after around 250 miles which hasn’t happened yet.

20230514_162857.jpg

20230525_150538.jpg

How do you like the toyo at3's?

Posted

Changing tire sizes is a common thing to do. I seen it in racing a lot. There are plenty of aftermarket shops that have the ability to correct your speedometer. It doesn't have to be done at the dealer. In fact, I think it's illegal for the factory to lock out the ability to have the speedometer calibrated since it's a Federal law that a speedometer must be accurate within 5 mph at a speed of 50 mph and there's no law preventing someone from changing their tire size.

If the dealers don't want to make some money for a simple adjustment, spend your money somewhere else.

  • 4 weeks later...
Posted
On 5/26/2023 at 9:08 PM, DuckBoi said:

How do you like the toyo at3's?

Best tires I've ever owned. I've had BFG, Goodyear, just to name a few.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • 2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...