Jump to content

Cold Air Intake Mod for 2021 Chevrolet Silverado Z71 RST 5.3

GarandPappy
 Share

Recommended Posts

GarandPappy Enthusiast

GarandPappy

Posted
Posted

Looking at a new Cold Air system for my new Silverado.  Been looking at so many and there is a lot more out there than there ever used to be.  I don't want anything that is going to require a tune, and that was leading me to the GM factory upgrade.  However, I have seen so much on the S&B, CAI, and K&N filter systems, and I just need some advice from folks who have actually pulled the trigger on some of these.  If you've purchased one of the following below, and could share your experiences, it would be greatly appreciated.

 

The following is what I have been looking at the following:

  1. Cold Air Inductions 512-0105-B 
  2. S&B 75-5128 Cold Air Intake
  3. Genuine GM Cold Air Intake 84561597
  4. K&N Cold Air Intake 63-3109

 

 

  • Cold Air Inductions 512-0105-B
    • image.thumb.png.6cd637dbbe6a273bd70e7309e8fe083d.png
  • S&B 75-5128 Cold Air Intake
    • image.thumb.png.1c6c04cb75c76b53189539715dee8e75.png
  • Genuine GM Cold Air Intake 84561597 
    • image.thumb.png.16c686d9ffca41e2292e27632e7a593a.png
  • K&N Cold Air Intake 63-3109
    • image.thumb.png.28e12a7b29a958e7a88bbbfdd8ef5996.png
Transient Senior Enthusiast

Transient

Posted
Posted

I have the GM kit on my truck.  I can't give you before and after comparison since I did the install immediately after picking up my truck from the dealer.  It costs more than the others you're considering because it includes a tune that you need to take your truck back to the dealership for.  The dealership should not charge you for the tune because you already paid GM for it.  In the instructions is info for the dealer on how to bill the cost of the tune to GM.  Also, replacement filters are recommended at 20,000 miles, iirc.  They run between $60-$100 depending on where you buy it from.  I've heard the kit was made in cooperation with K&N.  Biggest advantages, imo, are a factory supported tune that won't affect your warranty at all, dealership backed parts, and won't affect GM warranty at all.  Cons:  It's expensive.

JDuBYA561 New Member

JDuBYA561

Posted
Posted

I just got the k&N 71-3110 series blackhawk CAI system. I love it! Much smoother and stronger acceleration. I definitely noticed a performance increase and it looks and sounds amazing. For anyone that says it doesn't make a difference they dont know what they're talking about.

20210527_191242.jpg

GarandPappy Enthusiast

GarandPappy

Posted
  • Author
Posted
10 hours ago, JDuBYA561 said:

I just got the k&N 71-3110 series blackhawk CAI system. I love it! Much smoother and stronger acceleration. I definitely noticed a performance increase and it looks and sounds amazing. For anyone that says it doesn't make a difference they dont know what they're talking about.

Did you need to have anything programmed?

Silverado4x4 Senior Enthusiast

Silverado4x4

Posted
Posted
3 hours ago, GarandPappy said:

Did you need to have anything programmed?

Save your money as they do NOTHING to improve performance and you already have a CAI on your truck now its just these look pretty and give you more noise making you think you have more power. As far as the programing all that does is calibrate the air filter monitor in your truck that tells you when to change the air filter that's all it does. I love it when people say they give you more power.

Anacortes Army Guy Enthusiast

Anacortes Army Guy

Posted
Posted (edited)

Actually, the programing that is included with the GM Performance intake has nothing to do with recalibrating the air filter monitor.  As part of the installation instructions, the installer is instructed to turn off the air filter monitor in the DIC.  The reprogramming is designed to adjust for the repositioned MAF sensor on the intake, which if not done (as in if you install it yourself without the reprogramming), you may encounter issues such as a decrease in MPG, and maybe the CEL lighting up.  See Zane's post at the beginning of this forum on the installation of both the GM Performance intake and exhaust.  There's also a good writeup on TruckTrends.com on the same subject.

Edited by Anacortes Army Guy
  • Thanks 1
1454 Enthusiast

1454

Posted
Posted
1 hour ago, Silverado4x4 said:

Save your money as they do NOTHING to improve performance and you already have a CAI on your truck now its just these look pretty and give you more noise making you think you have more power. As far as the programing all that does is calibrate the air filter monitor in your truck that tells you when to change the air filter that's all it does. I love it when people say they give you more power.

Actually, they do make more power. That's dyno verifiable. They also make more noise. Now, whether the 2-4% increase is worth the cost is up to the user, but they do make more power than one without it at WOT. 

  • Like 1
Transient Senior Enthusiast

Transient

Posted
Posted
13 hours ago, Silverado4x4 said:

Save your money as they do NOTHING to improve performance and you already have a CAI on your truck now its just these look pretty and give you more noise making you think you have more power. As far as the programing all that does is calibrate the air filter monitor in your truck that tells you when to change the air filter that's all it does. I love it when people say they give you more power.

GM claims an increase in power.  Are they lying?

  • Like 1
  • 2 weeks later...
EngLab Enthusiast

EngLab

Posted
Posted
On 6/13/2021 at 6:28 PM, JDuBYA561 said:

I just got the k&N 71-3110 series blackhawk CAI system. I love it! Much smoother and stronger acceleration. I definitely noticed a performance increase and it looks and sounds amazing. For anyone that says it doesn't make a difference they dont know what they're talking about.

20210527_191242.jpg

....are you still liking the intake now after some time has passed? how much additional intake noise has it added now that its settled in and has the truck calibrated to it well? 

Spyderwebb Enthusiast

Spyderwebb

Posted
Posted

Love my Rotofab, the gains may be minor but the looks and the sound of it deep-breathing make it worth it to me!!

IMG_2116.jpg

BossTaco2020 Enthusiast

BossTaco2020

Posted
Posted

I got the CAI CAI and I've been very pleased with it. I don't drive WOT that often, but when I do get on the gas, it makes a righteous growl that I love. Need to get the exhaust changed out as well so it'll complement it. I didn't get a tune and I have no basis as to performance gains as I did it as soon as I got the truck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Vehicle Payments

      By KARNUT · Posted

      This is interesting. My quote tagged here is different from my original quote. After I’m driving them longer. That isn’t me. I don’t talk that way. I definitely wouldn’t express myself that way. Interesting.
    • UrbanRage
      What have you done to your K2 today?

      By UrbanRage · Posted

      I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • ChristopherDobson
      Vehicle Payments

      By ChristopherDobson · Posted

      Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...