Jump to content

DIY sliding window leak permanent repair

Leevon
 Share

Recommended Posts

GN2018 Enthusiast

GN2018

Posted
Posted (edited)

I’m so thankful to Leevon for posting this.  My original plan if I got a leak was to get the solid window.  Now I’m thinking I’ll find someone to do the repair properly as shown in this thread.  And, if I ever have the headliner or spoiler off for any other repair, I will make sure this is done.  So sad that it’s not done this well in the factory, especially since it’s a know issue.

 

Thanks to the forum admin for pinning it.

Edited by GN2018
  • Like 2
  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Leevon
Leevon

This is my 2nd Trail Boss with a leaking slider, both of them I bought new.  The first one I fixed myself by replacing the slider with a solid window (details are somewhere in the massive leak thread)

GN2018
GN2018

I’m so thankful to Leevon for posting this.  My original plan if I got a leak was to get the solid window.  Now I’m thinking I’ll find someone to do the repair properly as shown in this thread.  And,

Josh_166
Josh_166

Just did this myself. I tried sealing around the spoiler first and it definitely slowed it down, but there was still a slight leak. Not a soaked headliner like it was before the fix but enough I didn'

Posted Images

luke1333 Enthusiast

luke1333

Posted
Posted

@Leevon thanks for the post! My truck started leaking last week and finally got around to doing it today. Perk of working in dealer is I could help do it so I also added strip caulk around all the bolts. Used the seam sealer GM recommended in the bulletin. My spoiler only had one seal on the 12 holes as well! Thanks again for all the tips! I thought about the camera/mirror upgrade as well but not wanting to spend $800+ right now! But now I know it isn't terrible to do!

  • Like 1
  • 2 weeks later...
Leevon Enthusiast

Leevon

Posted
  • Author
Posted
On 2/8/2022 at 12:38 PM, luke1333 said:

@Leevon thanks for the post! My truck started leaking last week and finally got around to doing it today. Perk of working in dealer is I could help do it so I also added strip caulk around all the bolts. Used the seam sealer GM recommended in the bulletin. My spoiler only had one seal on the 12 holes as well! Thanks again for all the tips! I thought about the camera/mirror upgrade as well but not wanting to spend $800+ right now! But now I know it isn't terrible to do!

 Glad you got to put hands on it!  I think they're entirely 100% fixable and it's frustrating that the bulletins, and dealer practices don't line up.  

luke1333 Enthusiast

luke1333

Posted
Posted
55 minutes ago, Leevon said:

 Glad you got to put hands on it!  I think they're entirely 100% fixable and it's frustrating that the bulletins, and dealer practices don't line up.  

Yeah mine was pouring after almost 2 years of ordering it, just started out of the blue. Resealed it all up, bolts etc etc and started to barely leak again. Going to put window in and camera mirror I guess this time around!

  • 2 weeks later...
Pacfanweb Enthusiast

Pacfanweb

Posted
Posted
On 1/17/2022 at 1:56 PM, newdude said:

 

 

I hope you got new nuts before you put it all back together.

 

They're only considered not reusable because they come with sealer on the washers, and it is basically destroyed when you remove them.  If you just put some sealer on them when you reinstall, you can reuse them just fine. 

  • 4 weeks later...
hihosilverado Enthusiast

hihosilverado

Posted
Posted

How flowable is the seam sealer?  Could this be done without removing the spoiler and just masking well and running the bead through the gap between the spoiler and top of glass?  I noticed that 3M makes a clear flowable self leveling seam sealer…

Leevon Enthusiast

Leevon

Posted
  • Author
Posted
On 4/3/2022 at 1:26 PM, hihosilverado said:

How flowable is the seam sealer?  Could this be done without removing the spoiler and just masking well and running the bead through the gap between the spoiler and top of glass?  I noticed that 3M makes a clear flowable self leveling seam sealer…

 

It's self-leveling which means it does have some flowability.  I think you might have success but it'd be a gamble...would be curious to see it tried.  

AJMBLAZER Enthusiast

AJMBLAZER

Posted
Posted

Yes you can do it without taking the spoiler off.  Just did it last week. 
 

Absolutely pouring rain now. We’ll see how it does. 

hihosilverado Enthusiast

hihosilverado

Posted
Posted
6 hours ago, AJMBLAZER said:

Yes you can do it without taking the spoiler off.  Just did it last week. 
 

Absolutely pouring rain now. We’ll see how it does. 

How did it do??  Which sealer did you use?

AJMBLAZER Enthusiast

AJMBLAZER

Posted
Posted

Well, so far so good.  Drove through absolutely pouring rain for 45 minutes on the highway this morning and then sat in the parking lot for 6 hours under rain ranging from a steady rain to a pouring downpour.  I can't see a sign of a leak now.

 

I used the Permatex sealant mentioned in another thread.  Worked great.  Might still go get a 3rd tube and put more on the window's top edge because I was a bit shocked at how much just sort of disappeared out of sight after I put it in there.  GM sure didn't use a lot of it's sealant and they definitely left a lot of void space for the water to sit.  Now I can see the sealant all the way across if I put my face up next to the spoiler and look down into the space between the glass and the cab.

WeGone Enthusiast

WeGone

Posted
Posted
15 hours ago, AJMBLAZER said:

Well, so far so good.  Drove through absolutely pouring rain for 45 minutes on the highway this morning and then sat in the parking lot for 6 hours under rain ranging from a steady rain to a pouring downpour.  I can't see a sign of a leak now.

 

I used the Permatex sealant mentioned in another thread.  Worked great.  Might still go get a 3rd tube and put more on the window's top edge because I was a bit shocked at how much just sort of disappeared out of sight after I put it in there.  GM sure didn't use a lot of it's sealant and they definitely left a lot of void space for the water to sit.  Now I can see the sealant all the way across if I put my face up next to the spoiler and look down into the space between the glass and the cab.

 Does your rear window still work?

hihosilverado Enthusiast

hihosilverado

Posted
Posted
On 4/6/2022 at 6:31 AM, AJMBLAZER said:

Yes you can do it without taking the spoiler off.  Just did it last week. 
 

Absolutely pouring rain now. We’ll see how it does. 

I ended up ordering the Kent clear seam sealer in the TSB and doing it yesterday.  I masked both sides of “the gap” and taped a sheet of plastic into the bed to catch drips.  I did soak the tube of seam sealer in hot water for a bit so it would flow better.
 

It rained like crazy today for several hours and no signs of any leak.  My truck is an early build 2021 and I had a tiny leak start around 14k miles.

 

 

  • Like 1
  • 2 months later...
Pacfanweb Enthusiast

Pacfanweb

Posted
Posted
On 4/3/2022 at 2:26 PM, hihosilverado said:

How flowable is the seam sealer?  Could this be done without removing the spoiler and just masking well and running the bead through the gap between the spoiler and top of glass?  I noticed that 3M makes a clear flowable self leveling seam sealer…

It flows pretty well.  
The Kent Automotive Hi-Tech Clear that's in the GM bulletin also "self levels" a bit...it's not as runny as the 2 part seam sealer in this thread, but does a good job as well.  
It's true about the nuts not needing to be replaced.  Only reason they recommend it is because they have a sealant on them and it's basically destroyed when you tighten them...but it's INSIDE the cab, which isn't the ideal place for sealer to begin with. 
You want to seal the outside if you have the choice, which you do when you remove the spoiler. 

I cut, form and use 3M Ribbon Sealer on the outside, around all the holes.   It's butyl, and will last longer than you'll live.  There are other products that will work as well, but I use that frequently and always have it, and it's fantastic for the job. 

 

The key here is to make sure all the surfaces the sealer is going to touch are clean, clean, clean.  Especially that inside of the glass itself.  If the sealer doesn't adhere to the glass and it pulls away, you can have the leak again.     

 

 

Pacfanweb Enthusiast

Pacfanweb

Posted
Posted
On 4/12/2022 at 9:43 PM, hihosilverado said:

I ended up ordering the Kent clear seam sealer in the TSB and doing it yesterday.  I masked both sides of “the gap” and taped a sheet of plastic into the bed to catch drips.  I did soak the tube of seam sealer in hot water for a bit so it would flow better.
 

It rained like crazy today for several hours and no signs of any leak.  My truck is an early build 2021 and I had a tiny leak start around 14k miles.

 

 

Yes, if it's warm weather the Kent flows better.  If it's winter and I need it to flow more, I just start my truck, set it under the vent and blast the heater for a few minutes, and that does the trick.  

That works for most all sealers, btw.  I once saw a glass company on a lot that fabbed up a box that they stood sealer tubes in, and the ran lines from the engine coolant to it and literally had coolant pumping through the void outside the box, to keep their tubes of urethane warm so it flowed better.   Worked, too.   Flowed like butter. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   1 Member, 0 Anonymous, 3,021 Guests (See full list)

  • Latest Articles

  • Posts

    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...