Jump to content

Recommended Posts

Posted

Planning on sticking with the stock 20" wheels on my 2021 Silverado. Currently have the 275/60/20 stock rubber on it. I have Bilstein 5100s on order for the front to raise it up 2" and have 2" blocks ready to go in the rear as well. 

 

Just want some opinions if it's worth going up to a 35" or just stick with the 34" and opinions on the tires. I've run K02's on almost every truck I've had but only really because of the winter performance. I've got a separate set of rims and winters for this truck so winter performance isn't important anymore.  And yes, I can use a search function but it's so bloated with random results, I don't have a week to sort through it.

Posted

I’d go with 285/65. With your 2 in shocks and positive offset I believe you should be ok.  Now as far as tire goes both are great performers. But man are the GYs loud. They hum like some MT tires.  

  • Like 1
Posted
10 hours ago, superhighsierra said:

Duratracs are not loud.

 

Duratracs look better than any other non M/T tire.

 

You do the math.

 

They look great i will give you that and perform great. 

But IMO they are very loud for an AT tire.  My brothers 2021 AT4 at 8k miles is super loud, so much so he is changing them out to TOYOs . . But that's just me/my opinion and everyone's noise levels are different.  

  • Like 2
Posted

Neither tire lol. I hate them both and the KO2's have sky rocketed in price over the last year.

 

Falkens or Toyo's get my vote.

Posted
On 2/11/2022 at 11:48 AM, f8l vnm said:

 

They look great i will give you that and perform great. 

But IMO they are very loud for an AT tire.  My brothers 2021 AT4 at 8k miles is super loud, so much so he is changing them out to TOYOs . . But that's just me/my opinion and everyone's noise levels are different.  

I concur with the DuraTracs being loud. Have them now in my TrailBoss and at 27K miles I'm about ready to chuck them and buys something else. I still have plenty of tread left but the drone is unbearable. I rotate every oil change (~5K miles) and they're inflated correctly. Most of my driving is streets/highways with the occasional off-roading adventure. The DT's are fine offroad but so are a bunch of other tires that I've seen be mentioned that are quieter.

Posted
32 minutes ago, BossTaco2020 said:

I concur with the DuraTracs being loud. Have them now in my TrailBoss and at 27K miles I'm about ready to chuck them and buys something else. I still have plenty of tread left but the drone is unbearable. I rotate every oil change (~5K miles) and they're inflated correctly. Most of my driving is streets/highways with the occasional off-roading adventure. The DT's are fine offroad but so are a bunch of other tires that I've seen be mentioned that are quieter.

I guess I never heard anyone I know complain about the noise with these tires. I'll probably end up running KO2's, they run around the same price here as any other tire and I've always liked them. Is the size that's of concern. I think the 275/65 is the best route, rather not risk rubbing with the 285.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...