Jump to content

TPMS

Slabhunter
 Share

Recommended Posts

Slabhunter Enthusiast

Slabhunter

Posted
Posted

I have a 2020 WT that I recently outfitted with a set of factory five spoke 2018 20” Chevy factory wheels. I have tried to re-learn the TPMS with 2 different tools now with no luck. Are they compatible or am I missing something. I know the take-offs have sensors because they have never been off of the downer truck. 

redwngr Senior Enthusiast

redwngr

Posted
Posted

I think I've read that the sensors have changed/updated between 18 and 20 model years.

CamGTP Senior Enthusiast

CamGTP

Posted
Posted (edited)

The sensors themselves are different is what he is getting at.

 

The frequency range on a 2018 rim is not compatible with the 2020+ trucks, you must swap the sensors or buy new ones for 2020+ trucks.

 

It's the same thing for half tons, the 2019's used a new sensor compared to 2018's.

Edited by CamGTP
  • Like 1
  • 2 months later...
mandrewbot3k Enthusiast

mandrewbot3k

Posted
Posted
On 2/28/2022 at 1:29 PM, Slabhunter said:

I have a 2020 WT that I recently outfitted with a set of factory five spoke 2018 20” Chevy factory wheels. I have tried to re-learn the TPMS with 2 different tools now with no luck. Are they compatible or am I missing something. I know the take-offs have sensors because they have never been off of the downer truck. 

 

Wondering what came of your situation...Did you ever figure this out?

 

I was able to relearn my existing tires, but not the new ones (off a 2021) I just purchased supposedly have the stock sensors in. I can only figure if they are there, maybe the sensors are asleep and need to be woken up by maybe a rapid deflate. I'm at work, so it didnt seem like a good idea to rapid deflate, lol. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • UrbanRage
      What have you done to your K2 today?

      By UrbanRage · Posted

      I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • ChristopherDobson
      Vehicle Payments

      By ChristopherDobson · Posted

      Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...