Jump to content

Recommended Posts

Posted

2021 Silverado 5.2 with 10k miles.Couple weeks ago heard the popping/ticking sound on start up and dealer confirmed the collapsed lifter(s).

 

Since GM won’t issue a recall but is having all dealers swap out the parts before selling new ones, parts aren’t available and my trucks already been in the shop for 2 weeks. I’m pissed and given the inflated cost of trucks right now thinking about just selling the truck back.

 

I’ve always thought my truck shifted a bit badly at low gears, but unsure if related. Dunno if the lifters suddenly failed or if I’ve had some unknown issues all 10k miles.
 

Could i be facing long term engine issues due to this? would i be better off getting out from under a potential lemon now? Or am i over-reacting?

Posted
1 minute ago, khays said:

2021 Silverado 5.2 with 10k miles.Couple weeks ago heard the popping/ticking sound on start up and dealer confirmed the collapsed lifter(s).

 

Since GM won’t issue a recall but is having all dealers swap out the parts before selling new ones, parts aren’t available and my trucks already been in the shop for 2 weeks. I’m pissed and given the inflated cost of trucks right now thinking about just selling the truck back.

 

I’ve always thought my truck shifted a bit badly at low gears, but unsure if related. Dunno if the lifters suddenly failed or if I’ve had some unknown issues all 10k miles.
 

Could i be facing long term engine issues due to this? would i be better off getting out from under a potential lemon now? Or am i over-reacting?

Huh one more lifter issue tread? Looks like at list  one a day, but some people on here say GM have no big problem with lifters on their v8 engines….. 

Posted
1 minute ago, Saso said:

Huh one more lifter issue tread? Looks like at list  one a day, but some people on here say GM have no big problem with lifters on their v8 engines….. 

That's because there's a new thread for every truck that has failure. Let it go already.

 

  • Like 3
Posted

That’s why you couldn’t have paid me to buy a new truck during the so called “pandemic”. March of 2020 to late 2021.  Too many variables were going on during that time. My 2019 Silverado has been flawless and stepdads 2020 Sierra he bought in September of 2019 has been the same. He was a die hard Ford guy till he realized they are cheap rattle cans and their Ecobust’s don’t live up to their so called MPGs. 
 

There are still a few variables out there right now that tells me and others in my family to just be patient. He wants another Sierra but a Denali, told him wait it out one  year or more!  Then those “variables” will correct themselves. 

Posted
9 minutes ago, TNTSilverado said:

That’s why you couldn’t have paid me to buy a new truck during the so called “pandemic”. March of 2020 to late 2021.  Too many variables were going on during that time. My 2019 Silverado has been flawless and stepdads 2020 Sierra he bought in September of 2019 has been the same. He was a die hard Ford guy till he realized they are cheap rattle cans and their Ecobust’s don’t live up to their so called MPGs. 
 

There are still a few variables out there right now that tells me and others in my family to just be patient. He wants another Sierra but a Denali, told him wait it out one  year or more!  Then those “variables” will correct themselves. 

Come on guys, give him a break.  There are no instructions on this site where to put your comments or start a new thread until one of you whinny little girls spout off.  GM has known about this lifter and cam issues since the 1970's and not done much to fix it.  When you take a new vehicle to the dealer you expect them as the so called "experts" to fix it in a timely manner.  I know many folks that the dealer only changed the bad lifter.  For the cost of lifters verses the cost of labor why would anyone only change one lifter.  Now with the government made supply chain issues, who knows when you will get parts or your vehicle back.  I worked for GM and still drive primarily GM vehicles but like all manufacturers cost overrides quality.  Ford and Ram are no better or worse.  I would not even comment on this but this is a known problem that has not been fixed and it needs to or maybe there needs to be a class action law suit?

Posted
5 hours ago, fatwhiteboy said:

Come on guys, give him a break.  There are no instructions on this site where to put your comments or start a new thread until one of you whinny little girls spout off.  GM has known about this lifter and cam issues since the 1970's and not done much to fix it.  When you take a new vehicle to the dealer you expect them as the so called "experts" to fix it in a timely manner.  I know many folks that the dealer only changed the bad lifter.  For the cost of lifters verses the cost of labor why would anyone only change one lifter.  Now with the government made supply chain issues, who knows when you will get parts or your vehicle back.  I worked for GM and still drive primarily GM vehicles but like all manufacturers cost overrides quality.  Ford and Ram are no better or worse.  I would not even comment on this but this is a known problem that has not been fixed and it needs to or maybe there needs to be a class action law suit?

Whiny little girls???  This coming from a guy whose avatar is fatwhiteboy!!  LMFAO

 

I was just stating facts that my truck and stepdads truck has been flawless. My other 5 GM trucks also never had engine issue.  Hell my 97 C/K had 262k miles in it when I sold it back in 2019. And I stated a lot of the problems with this lifter issue started during the so called pandemic. The other major lifter issues was clear back in 2007-early 2009 when GM was first introducing AFM.  Those years they had huge oil

consumption issues and lifter failures. After those years it was few in-between.  

Posted

if it just happened youll be ok. Just hope they change all 16.

 

The damage would come from longterm use and metal pieces hypothetically getting pushed through motor. I had a motor with four wiped cam lobes ran for a few thousand miles, rebuilt and ran fine. No oil pressure issues, etc. 

Posted
6 hours ago, lpg said:

if it just happened youll be ok. Just hope they change all 16.

 

The damage would come from longterm use and metal pieces hypothetically getting pushed through motor. I had a motor with four wiped cam lobes ran for a few thousand miles, rebuilt and ran fine. No oil pressure issues, etc. 

if it has 10k miles he will only get failed bank of 8. Yeah like you said not much to worry about

Posted
On 4/23/2022 at 4:43 PM, khays said:

2021 Silverado 5.2 with 10k miles.Couple weeks ago heard the popping/ticking sound on start up and dealer confirmed the collapsed lifter(s).

 

Since GM won’t issue a recall but is having all dealers swap out the parts before selling new ones, parts aren’t available and my trucks already been in the shop for 2 weeks. I’m pissed and given the inflated cost of trucks right now thinking about just selling the truck back.

 

I’ve always thought my truck shifted a bit badly at low gears, but unsure if related. Dunno if the lifters suddenly failed or if I’ve had some unknown issues all 10k miles.
 

Could i be facing long term engine issues due to this? would i be better off getting out from under a potential lemon now? Or am i over-reacting?

My dad just had the same thing happen to his except at 15k miles. His is a January 2021 build. He has lost faith in his truck over it. Dealer will only replace one bank. Mine is a 2021 (October 2020 build). Fingers crossed mine doesn’t have any issues. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...