Jump to content

2022 Silverado (refresh) Dash Exploded View

mjonesjr84
 Share

Recommended Posts

mafd2 Senior Enthusiast

mafd2

Posted
Posted
1 minute ago, mjonesjr84 said:

 

The window sticker will say it isn't installed.

Thought DFM was pretty much all deleted. Don't put a performance exhaust until you get the Range because it'll sound like crap.

newdude Senior Enthusiast

newdude

Posted
Posted
18 hours ago, ES44AC said:

My 22.5 Trail Boss 6.2l has DFM 🤬. The 3 5.3l I seen waiting on their owners didn't have DFM.  I'll be glad when the Pulsar LT is updated for refreshed trucks.  

 

 

All 6.2s have DFM enabled.  Only certain 5.3s are affected by the chip issues.  Any 5.3 with Max Trailer for example, DFM is enabled on.  

newdude Senior Enthusiast

newdude

Posted
Posted
16 hours ago, mafd2 said:

Thought DFM was pretty much all deleted. Don't put a performance exhaust until you get the Range because it'll sound like crap.

 

 

On factory disabled trucks, parts are still in the engine.  5.3 is the only engine affected by the chip issues as well.  Certain configured 5.3s have DFM working still, like all NHT Max Trailer equipped ones.

 

All 6.2s it still works.  

mafd2 Senior Enthusiast

mafd2

Posted
Posted
2 hours ago, newdude said:

 

 

On factory disabled trucks, parts are still in the engine.  5.3 is the only engine affected by the chip issues as well.  Certain configured 5.3s have DFM working still, like all NHT Max Trailer equipped ones.

 

All 6.2s it still works.  

Thanks. I ordered my refresh in Dec. Got it at the end of March. Truck didn't come with a window sticker and dealer said it would come later. I asked asst. sales mgr. recently if mine had DFM and he looked back and said it didn't. What other ways is there to tell if it does or doesn't?

jaxcam02 Enthusiast

jaxcam02

Posted
Posted (edited)
9 minutes ago, mafd2 said:

Thanks. I ordered my refresh in Dec. Got it at the end of March. Truck didn't come with a window sticker and dealer said it would come later. I asked asst. sales mgr. recently if mine had DFM and he looked back and said it didn't. What other ways is there to tell if it does or doesn't?

Tell your dealer to get you the .pdf window sticker and tell them to get you the build sheet via VIN. They should be able to email you both of these easily. My dealer did.

 

mine has DFM deleted with not retrofit

Capture.PNG

Edited by jaxcam02
add image
  • Like 1
Steve-2019 Enthusiast

Steve-2019

Posted
Posted
45 minutes ago, mafd2 said:

Thanks. I ordered my refresh in Dec. Got it at the end of March. Truck didn't come with a window sticker and dealer said it would come later. I asked asst. sales mgr. recently if mine had DFM and he looked back and said it didn't. What other ways is there to tell if it does or doesn't?

 

Your dealer "should" be able to get you a copy of your window sticker.

ES44AC Enthusiast

ES44AC

Posted
Posted
23 hours ago, mafd2 said:

Wow. How do you know you have it? Build sheet/window sticker? 

Widow sticker 

newdude Senior Enthusiast

newdude

Posted
Posted
5 hours ago, mafd2 said:

Thanks. I ordered my refresh in Dec. Got it at the end of March. Truck didn't come with a window sticker and dealer said it would come later. I asked asst. sales mgr. recently if mine had DFM and he looked back and said it didn't. What other ways is there to tell if it does or doesn't?

 

 

Option code YK9 will be on the build sheet.  

  • Like 1
ES44AC Enthusiast

ES44AC

Posted
Posted (edited)

20220606_172138.thumb.jpg.57c796ff45262f0b2a9275d717b78cab.jpg

1 hour ago, ES44AC said:

Widow sticker 

Here's mine. 

Edited by ES44AC
  • 1 month later...
battman9 New Member

battman9

Posted
Posted
On 6/2/2022 at 10:44 AM, mjonesjr84 said:

 

Awesome, thank you!

For some reason I am not able to download the PDF, getting an error msg. Is anyone else able to download it? I am wanting to install the Autostop Eliminator in my 2022 refreshed model GMC Sierra 1500 AT4, Thanks

ShotgunZ71 Senior Enthusiast

ShotgunZ71

Posted
Posted

My LTZ 6.2 came with DFM and AutoStop, but awaiting chip for heated and ventilated front seats, heated rear seats, and front and rear parking assist. My truck was built in Fort Wayne. Is there any correlation to what's omitted chip-wise between the US-built and Mexico-built trucks? Or Canada for that matter? Wonder if some chip components were more readily available in some plants versus others at various production times.

  • 4 weeks later...
cccjrsbox Enthusiast

cccjrsbox

Posted
Posted
On 6/2/2022 at 10:44 AM, mjonesjr84 said:

 

Awesome, thank you!

Hi there - any chance you have a dash blowup diagram for a 22.5 with no console?  Looking to remove the lower center panel and don't want to foul it in the process of blindly figuring it out!  Thank you-

TJ Acker Enthusiast

TJ Acker

Posted
Posted
On 7/9/2022 at 2:46 PM, battman9 said:

For some reason I am not able to download the PDF, getting an error msg. Is anyone else able to download it? I am wanting to install the Autostop Eliminator in my 2022 refreshed model GMC Sierra 1500 AT4, Thanks

Same, wont let me download it, says its not found

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Keith179
      Cold start Miss, oil in cylinder

      By Keith179 · Posted

      I’m out of ideas on this truck. 2020 Silverado 1500. 5.3 135,000 miles. Has a p0308 and p050d codes. Smokes From exhaust when cold. Compression test passed. New plugs, wires and coil on cyl 8. Same issue. New coil on 8, no change. Replaced injectors, no change. Bore scope showed oil pooled on the piston after sitting overnight. Pulled head and had machine shop check it out. No cracks. Stem seals looked good, replaced anyways. He also ground valve seats. Put it all back together and still have the same issue. Bore scope shows oil on the piston again. Leaning towards maybe a cracked ring but unsure. Cylinder looked good when the head was off, no scoring or scratches. Any ideas on what else I should look for?  Appreciate the help 
    • HeronLeal
      2021 Silverado 2.7L – N232395310 – Can someone with GM dealer access check my VIN?

      By HeronLeal · Posted

      Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...