Jump to content

Warning light issues

Chris41586
 Share

Recommended Posts

Chris41586 Enthusiast

Chris41586

Posted
Posted

Fairly new to posting here, so please let me know if this question would do better in another spot. I have a 2017 Sierra 1500 SLT. About 2 years ago when it was hot out,I started my truck, and the dash started flashing through all of the warning signs(seat belt, air pressure, pretty much every warning). None of my gauges worked on the dash, but my infotainment system worked, and my lights, including blinkers, on the outside worked. After running it for about ten minutes, it like reset itself and the dash started working. It was under warranty at the time, but only happened once. Now, my truck is no longer under warranty, and it happens every single time it's hot outside. The dealership said they'd have to keep my truck for awhile to let it mimic the issue, and I know they will charge me out the ass just to find the problem, before asking for a couple grand to fix it. Considering it only happens when it's hot, I feel like something is expanding and making a connection issue. Has anyone had any experience or heard of this? I would greatly appreciate any advice on what to look for it how to test the issue. I did use a tester while it was doing it last time, but no codes came up. I'm really confused. 

txab Senior Enthusiast

txab

Posted
Posted

Check battery condition/charge. Check battery cables and connections. Check body ground connections

lovecars Enthusiast

lovecars

Posted
Posted

If the instrument panel is the only problem and everything else is fine. the truck runs, windows work, headlights work running lights  work, etc...

 

Then I would remove the instrument panel and check the connector, If I'm not wrong is just one connector that goes to the ECM, so there are not to many problems to check.

 

I just looked at the GM schematic and it does show just one direct connector to the ECM

Chris41586 Enthusiast

Chris41586

Posted
  • Author
Posted
2 hours ago, lovecars said:

If the instrument panel is the only problem and everything else is fine. the truck runs, windows work, headlights work running lights  work, etc...

 

Then I would remove the instrument panel and check the connector, If I'm not wrong is just one connector that goes to the ECM, so there are not to many problems to check.

 

I just looked at the GM schematic and it does show just one direct connector to the ECM

Will the GM schematic show me exactly what I need to look at? I'm at work, but I'll definitely check the suggestions when I get home. 

lovecars Enthusiast

lovecars

Posted
Posted

No it's just the schematic, with no other info

 I can count all wires going into the ECM. And I can see that all those signals go to the display. But if there is a problem with for instance with the engine temp it goes to the ECM and then sends the info to the display

So the first thing to see is the back of the display.

Search you tube for a guy installing a Denali instrument panel and he shows how to get to it to remove it... if I find the type of connector and the wires I can give more info.

If you are used to working on old cars these are totally different and what you think can go wrong it's not.

All wiring on these trucks handle network wiring that send signals to and from to modules to do the work, if the module returns a fail then the computer either will try again or set a code. The trucks from 2224 and up will use ethernet network like all of office or home computers. There is a reason why, but I can write a.book about it...

 

Chris41586 Enthusiast

Chris41586

Posted
  • Author
Posted

Ok thanks! I'll look for the video and where to find the ECM. Is there a way to test and see what's bad?

Chris41586 Enthusiast

Chris41586

Posted
  • Author
Posted

Do you remember what year the guy is working on? There's a few videos dealing with the instrument panel, but each one looks a little different. 

Chris41586 Enthusiast

Chris41586

Posted
  • Author
Posted

I found the connector, but can't tell if anything's wrong. Here's what I'm wondering, I got a stereo system hooked up when I first got my truck. I'm not sure exactly how they ran the wires, but it looks like they went into this under my dash, because there's electrical tape on it. Is it possible that isn't getting a good connection when it heats up outside and messes with it? The radio doesn't ever cut out though

228FAFD4-E55D-44A8-A6FC-4F7F0CEB06B1.jpeg

Chris41586 Enthusiast

Chris41586

Posted
  • Author
Posted

Also, I'm not sure what these are for, but one of those red clips was popped down in the position to disconnect it. I wonder if that, or something else is loose, and when it heats up outside they separate a little. That's the only thing I can think of since it only happens when it's hot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • tararebecca
      2027 GMC Sierra: Official Discussion

      By tararebecca · Posted

      I agree, simplicity and reliability matter more as vehicles get more complicated. A V8 work truck option with fewer electronic features and a stronger warranty would definitely appeal to a lot of buyers who use their trucks for real work. Customizing it with trusted outfitters is often the best way to get exactly what you need.webcrimsNY
    • artistemorbidity
      2026 Sierra 1500 Denali - Sound upgrade?

      By artistemorbidity · Posted

      I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • newdude
      Me too……..

      By newdude · Posted

      The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • CamGTP
      Injector update

      By CamGTP · Posted

      Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...