Jump to content

Recommended Posts

Posted

My dog ate the wiring harness on to the 7-pin connector on my 2000 Silverado.  While fixing it, I reconnected all of the wires but I found one in the harness that didn't seem to have a home on the plug.  It's a light blue wire, approx 16-18 AWG I believe.  All of the other wires were broken at least an inch from the plug, so I knew where they went.  But this one wire doesn't seem to have a home.  I assume it shared a pin with one of the other wires, but I cannot figure out where.

 

Anyone have any ideas what this might be?

 

 

Posted

I would check a GM wire diagram, you can prolly find on on line....maybe call your local GM or trailer dealer?

Posted
6 hours ago, SC Tiger said:

My dog ate the wiring harness on to the 7-pin connector on my 2000 Silverado.  While fixing it, I reconnected all of the wires but I found one in the harness that didn't seem to have a home on the plug.  It's a light blue wire, approx 16-18 AWG I believe.  All of the other wires were broken at least an inch from the plug, so I knew where they went.  But this one wire doesn't seem to have a home.  I assume it shared a pin with one of the other wires, but I cannot figure out where.

 

Anyone have any ideas what this might be?

 

 

brake controller - blue wire . 

Posted
13 hours ago, slj2008 said:

brake controller - blue wire . 

There are two blue wires.  A heavier-gage blue that I have connected, but this is a second one.  I would assume it would tie into the other blue, but I don't want to actually do that until I know for sure.

 

So basically I have 8 wires going into a 7-pin connector.

 

I did test the connector with a 4-pin adapter and everything seems to work right.  So it is in the trailer braking system or something not used on those.

 

I should also add that this is the GM towing package setup from the factory.

17 hours ago, dna9656 said:

I would check a GM wire diagram, you can prolly find on on line....maybe call your local GM or trailer dealer?

I haven't been able to find one online yet.  I guess I could call the dealer but I'm trying to avoid that, honestly.  

 

I'm wondering if there was something else under there that the dog ate, or if it went to something else under there that I'm missing.  

Posted

it doesn't look like any of those show 8 wires going to the 7 pin plug so you may need the factory diagram

Posted
13 hours ago, richard wysong said:

it doesn't look like any of those show 8 wires going to the 7 pin plug so you may need the factory diagram

I'm going to poke around and see if that wire went somewhere else and somehow got bundled up with these.  I kinda doubt GM would just throw an extra wire in there that doesn't go anywhere, but who knows.

 

The plugs for the wiring harnesses that go to the back of the truck (tail lights, etc) are right above this area so maybe it came from there?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Because single shot injectors are ancient and multi hole injectors provide smoother running engines and sharper throttle response due to the fuel being atomized better..the best lead I have is a 24lb blue top injector almost everything matches up but the injector will put out about 26lb/hr which is just outside the gm threshold.figured id ask here to see if there was an absolute answer
    • Why is my question?   Any change in injectors requires a tune. Unless you are going back with the OEM part number or a newer part number of that same injector.   Any size difference or type difference like the EV6 style injectors all have different injector data for them. And there is no EV6 injector that matches the factory 25 lb/hr size that your truck comes with. I've been messing with these trucks and tuning them for a long time and what you trying to do doesn't exactly make sense to me.
    • My 6.6 gas lt8 had lifter noise with 28000 miles bought new 2026 and while driven to dealer it threw #1 rod bearing “HD my ass” good luck with yours i hope it don’t turn a rod bearing!
    • When a condition becomes a business model.    https://www.gm-trucks.com/gm-truck-suv-incentives-pricing-2026/   Zane posted this in "Latest Articles".    The honest bottom line   Truck buyers have spent three years assuming this is a temporary condition that will break once inventories normalize. GM just presented it to investors as a durable strategy, on a chart, as evidence of good management.   Inventory did normalize. GM is at 511,000 units and squarely inside its own 50 to 60 day target. The discounts still did not come back, because the low incentive number is the goal rather than a symptom of shortage.   Plan your purchase around that reality instead of waiting for it to change. Follow our ongoing GM News coverage for pricing and incentive changes as the next-generation trucks land.
    • Thought it was raining this morning when we woke. Nope. Dew point was over 80 F and humidity 98%. Zero visibility distance. Everything was 'sweating'. I've seen rain come out of clouds but never out of Pepper or the tree trunks.    Wicked storms just missed us sliding off to the east but by blocks. Heat index about 110 F with air temp in the 90's.    This is  our third wave this month of multiple days of this type of weather. And yet the grass is going dormant and the ground is cracking this side of the street and water up the the hood opposite. Just weird stuff going on. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...