Jump to content

Height of truck after 4” or 6” lift on stock wheels? Will it fit in a garage?

probablyflying
 Share

Recommended Posts

probablyflying Enthusiast

probablyflying

Posted
Posted

Hey guys! 
I know it’s kinda a weird question. 
Basically I’m trying to figure out if I can do the lift in my garage. If I do either a 4” or 6” and put the stock wheels back on I’m hoping I can sneak it out under the door. Obviously once I put 35’s on it it won’t ever go back in there lol

Just trying to find a flat area to work on. 
Thanks! 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Not to sound stupid but can't you just take a measurement of the truck right now and just add 4 or 6in to that?

 

That would tell you exactly how much higher the truck is going to sit. And you can always just deflate all the tires and roll it the 15 feet out the garage door, that will give you a few inches with flat tires.

  • Like 4
16LT4 Enthusiast

16LT4

Posted
Posted (edited)

What is the height of your garage door’s lowest point when raised?


What is the height of your truck’s highest immovable point, sitting on your driveway?

 

Does the driveway meet the garage floor at an angle, and which way?

 

Basically, impossible for the internet to tell you. 

Edited by 16LT4
  • Like 1
MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted

I have a 5.5" lift and 35s and still fit into the car wash with a 6'8" limit.
Just barely.
So, if you have a 7' garage door, most common, you should be good.
I don't have a garage to test - old house in a historic district - but I do meet the height limit of my local car wash.

  • 1 month later...
steve76t Enthusiast

steve76t

Posted
Posted

i've got a 6" lift & 35" tires and still fit in my garage.  Barely but I fit with about 3/4" of room above the cab.  

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      For some unexplained reason my father wanted a salvage yard. As we were getting the family business off the ground one brother ran the salvage yard. We gathered there when rained out working on pipelines in the eighties to pull parts. Perfectly good running vehicles would come to us simply because they wouldn’t pass emissions inspection. We were able to swap parts and sell some of them. I got a clean old nova with a bad engine. I pulled a perfectly good small block out a Camaro. A father and son project with a rebuilt engine. The son couldn’t get the engine running right. The problem was the spark plugs weren’t gapped. The 90s vehicles probably widened the gap of shade tree do it yourself engine repair. My do it yourself hot rod repair stopped at the 70s. After that my trusted mechanic kept them in running shape. 
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I have an old dental chair in my shop. Something I got for free and apparently it has more than scrap value? People collect them although mine isn't restored or anything. It's visually interesting (1930's Ritter) which is why I like it. And it IS decently comfortable if you kick back.   When a good buddy of mine saw it he said, let me guess, Atlas. It's a conversation piece? As in, you ask the questions, they do the talking?   Where do you hide the jar of teeth?   I would never.   
    • Atlas
      OCI, not when but why?

      By Atlas · Posted

      Are we talking about the same thing, though? The 7 versus 3 wear metals was from Lakespeed's 3.0-specific oil brand comparison test between AcDelco oil and Mobil ESP. The filter remains a constant so whatever excess particles the AcDelco oil is producing aren't being filtered out.   I'm assuming there's a parallel comparison to be made; IF the filter can filter down those particles, engine life increases, and your graph makes the case that a better filter (lower micron rating) can increase engine life. Introducing fewer particles AND filtering those particles with higher efficiency is the best of all worlds. Good oil, good filter.   Where we may disagree is the "baseline relative engine life". I'm more apt to believe the base engine life value is 200k+ on very average oil and filters, "bulk oil of unknown brand and white-label generic fleet-grade filter, Jiffy Lube"   Going from a 10 micron filter to a 5 micron filter should boost a base 200k to 275k in a vacuum as a single factor alone.   Here's the whatabout: How does regularly changing the oil and filter ahead of recommended schedule influence baseline engine life? Most people aren't going to science the heck out of this stuff or ask about Micron ratings, HTHS, or wear comparison tests at Jiffy Lube. Most of the Jiffy lube techs would say they need to call their tech support line to even try to get an answer.   --   Because we love anecdotes here, when I was fishing for 4.3 parts at a local yard this weekend, ALL of the 4.3 vehicles had well over 200k. I love looking at odometers of junked vehicles. How far did THIS go before landing at the crusher? The ones that still had engines weren't seized. None of them were vehicles I'd consider were Amsoil queens, in fact most of them had some kind of service cling-sticker in the corner of the windshield indicating it probably had very average maintenance services. Even the fresh parts rigs- I'm not sure taking an S/T series to 400k has much value considering the running value of those vehicles was probably somewhere around $1,000. 25+ years is a good run on time alone.   The intake manifold I salvaged had clean and bright pool areas. As expected, I found the fuel lines in the manifold rubbed through, just like mine. I'm guessing the lines on that donor truck started leaking, the truck started running rough, and its owner said that's enough I'm unwilling or can't take it out of service for several days, or spend $1000+ to repair it at a shop, it's simply time for a newer more reliable vehicle (or, more than likely, this is the 2nd, 3rd time this has happened in the truck's lifetime). While I don't count on my Blazer for reliability, the thought of giving it away for parts at certain points during my adventure, and being mentally free from its needs has has crossed my mind. I'd be losing $1500 or so, but I can only make more money; not time.
    • diyer2
      Gas Prices

      By diyer2 · Posted

      still $4.00 85 oct.
    • Mike@SolerPrf
      2021+ Tahoe Suburban Yukon Escalade Throttle Body and DLX Controller

      By Mike@SolerPrf · Posted

      Always here to help. Discount Code: TIFF5OFF

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...