Jump to content

Recommended Posts

Posted

The crack has grown to about 7" now. It is almost exactly in the middle of the windshield running horizontally under the mirror. I'm just going to have it replaced.

It doesn't cost me anything to have it replaced, so I'm going to try another OEM windshield and see how it holds up. Judging from this thread, there doesn't seem to be many people having issues, so maybe I had a bad windshield.

  • Like 1
Posted
34 minutes ago, Dr1ft3r said:

The crack has grown to about 7" now. It is almost exactly in the middle of the windshield running horizontally under the mirror. I'm just going to have it replaced.

It doesn't cost me anything to have it replaced, so I'm going to try another OEM windshield and see how it holds up. Judging from this thread, there doesn't seem to be many people having issues, so maybe I had a bad windshield.

You know what?  Why not mix things up a bit and go for the aftermarket one?  Why not?  It's not costing you anything so what the hell...it might be better....who knows right?

 

  • Like 1
Posted
5 minutes ago, Jettech1 said:

You know what?  Why not mix things up a bit and go for the aftermarket one?  Why not?  It's not costing you anything so what the hell...it might be better....who knows right?

 


If I don't like it then I am stuck with it for a least a year, unless I want my insurance rates to go up. I get one windshield replacement per year with no penalty. Since nobody else is really complaining about the stock windshield, I'll try another one before I write if off.

Posted
1 minute ago, Dr1ft3r said:


If I don't like it then I am stuck with it for a least a year, unless I want my insurance rates to go up. I get one windshield replacement per year with no penalty. Since nobody else is really complaining about the stock windshield, I'll try another one before I write if off.

Ok, I understand.  I would do the same thing sir.  

Posted (edited)

I own a few classic cars and I clean the windshields with Stoner Invisible Glass, it works great. However on the new vehicles the glass just does not clean as easily.  There is like a film or coating in it. Trust me I have cars from 1959 to 1996 all GM cars. A 1978 Cadillac Coupe Deville, a 1970 GMC truck, 1959,1964,1977, 1984, 1992 and a 1996 all Oldsmobile 98's. All the glass cleans like glass should or at least like it did all my life. The newer cars GM, Toyota, Honda and a Mazda the glass like resists the cleaner, the wiping off is like there is a glue on the glass. It does not wipe as easily. Try it unless I have special newer cars.  I suspect like everything else they are making it different or cheaper.  This still happens with Windex too.

Edited by gkhashem
Posted
On 5/7/2023 at 9:43 AM, gkhashem said:

I own a few classic cars and I clean the windshields with Stoner Invisible Glass, it works great. However on the new vehicles the glass just does not clean as easily.  There is like a film or coating in it. Trust me I have cars from 1959 to 1996 all GM cars. A 1978 Cadillac Coupe Deville, a 1970 GMC truck, 1959,1964,1977, 1984, 1992 and a 1996 all Oldsmobile 98's. All the glass cleans like glass should or at least like it did all my life. The newer cars GM, Toyota, Honda and a Mazda the glass like resists the cleaner, the wiping off is like there is a glue on the glass. It does not wipe as easily. Try it unless I have special newer cars.  I suspect like everything else they are making it different or cheaper.  This still happens with Windex too.

I love stoner glass cleaner. Best stuff. And yeah, it’s almost like you can see where the wipers have wiped and stopped. Like a cleaner resistant film. 

  • 8 months later...
Posted

Just bought a 2023 Silverado. Compared to my last trucks (2004 & 2016) I do believe there is a problem with the windshield glass. I was wondering if it could be the angle too since the body style changed. Never had a small rock from the shoulder make a crack like it did on this new truck. Then I started to notice there are small chips from debris. I haven’t had a rock pop up that I was like damn that’s going to leave a mark, just road debris that sounds like rain leaving small chips everywhere. After our winter storm this week I came out and noticed a 1” horizontal crack on the inside close to the defrost vents. I don’t keep anything inside my vehicle that would cause this. I’m going to reach out to the dealership tomorrow. 

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...