Jump to content

Proper way to level AT4?

SierraStorm21
 Share

Recommended Posts

SierraStorm21 Enthusiast

SierraStorm21

Posted
Posted (edited)

2021 GMC Sierra AT4 and looking to level it the proper way. The truck came with 33's (275/60/20) and I'm looking at getting new slightly bigger tires too (34's (275/65/20's) and not sure if this would affect the way I should do it.

 

I've read through several threads talking about you should replace the UCA's in the process due to angles being outside the factory tolerance and I completely understand that and willing to spend the extra $ to do it right.

 

Reading through various reviews of the numerous kits out there, I think I've settled on the Rough Country one that includes the UCA's. I've never lifted or leveled a truck before, so I'm new to this and want to make sure I'm getting it right. So if you have experience or wisdom in this arena, feel free to chime and let me know if I should be doing something different.

Edited by Mstorm18
Had tire sizes reversed
Texanfisherman Enthusiast

Texanfisherman

Posted
Posted (edited)

The 275/65 will fit without a level kit. Possible that an extreme tread may rub a little, but it will fit. If you want to level on the cheap, I personally would not install anything more than a 1” without also replacing a-arms to correct geometry and improve the ball joint. Just my $.02. I have the silverado with the factory 2” and will do the BDS arms when I swap the tires. I will run a 295/65 with a 2” level and the BDS arms. 

Edited by Texanfisherman
SierraStorm21 Enthusiast

SierraStorm21

Posted
  • Author
Posted (edited)
48 minutes ago, Texanfisherman said:

You have your current and desired tire sizes reversed, but the 275/65 will fit without a level kit. Possible that an extreme tread may rub a little, but it will fit. If you want to level on the cheap, I personally would not install anything more than a 1” without also replacing a-arms to correct geometry and improve the ball joint. Just my $.02. I have the silverado with the factory 2” and will do the BDS arms when I swap the tires. I will run a 295/65 with a 2” level and the BDS arms. 

Good catch. Thanks! Edited

a-arms? The UCA's, right? The kit I linked has new ones that come with it, is that not right?

Edited by Mstorm18
Texanfisherman Enthusiast

Texanfisherman

Posted
Posted

Yes, a-arms/UCAs same thing. This is what I am banking on: https://www.jackit.com/bds-121260.html?gclid=Cj0KCQjw9deiBhC1ARIsAHLjR2AH8h5vX_coGf8m9IH8Lxcw94-iiPk3Z34gA3d21xnTpKfHIzrYd4QaAqlMEALw_wcB

 

Same setup they use in their 4 or 6 lifts. Just in case I want to go higher later. More expensive, but hard to find anyone dissatisfied with BDS and their quality. 

SierraStorm21 Enthusiast

SierraStorm21

Posted
  • Author
Posted

I think the more I read up on this, that perhaps the best thing to do is just have the front shocks swapped out for the 5100 Bilsteins, the ride adjustable ones to get a 1.1" lift. Seems doing so keeps things more within spec while still getting a slight lift in the front. While it may not be completely leveled, it's better than stock. 

  • Like 1
Luc1f3r Enthusiast

Luc1f3r

Posted
Posted

To everyone who levels their trucks, do you never carry heavy loads or tow? The factory Rake is meant to compensate for that.

 

Also stock height AT4 will fit 35x12 general grabbers with a slight rub on the mud flaps at full lock.

newdude Senior Enthusiast

newdude

Posted
Posted
9 hours ago, Mstorm18 said:

I think the more I read up on this, that perhaps the best thing to do is just have the front shocks swapped out for the 5100 Bilsteins, the ride adjustable ones to get a 1.1" lift. Seems doing so keeps things more within spec while still getting a slight lift in the front. While it may not be completely leveled, it's better than stock. 

 

 

I'd still get arms.  Non AT4s with a leveling kit will still fail the UCA.  We've had two come in now, one with significant damage to other components.  

SierraStorm21 Enthusiast

SierraStorm21

Posted
  • Author
Posted
1 hour ago, newdude said:

 

 

I'd still get arms.  Non AT4s with a leveling kit will still fail the UCA.  We've had two come in now, one with significant damage to other components.  

 

Ugh, good to know. Any reason not to get the Bilstein version of those if I go with the upgraded shocks?

 

https://cart.bilsteinus.com/details?id=2972832273118789803&fyv=true&Year=1490468497551627837&Make=7109127503953767713&Model=2312292685622996290&Submodel=2928454506658859972&Pos=Front Upper&En=3896745598793439258

 

Or is another brand a better option? 

SierraStorm21 Enthusiast

SierraStorm21

Posted
  • Author
Posted
3 hours ago, Luc1f3r said:

To everyone who levels their trucks, do you never carry heavy loads or tow? The factory Rake is meant to compensate for that.

 

Also stock height AT4 will fit 35x12 general grabbers with a slight rub on the mud flaps at full lock.

I'm sure everyone knows that, but most that are going for that leveled look aren't towing or carrying heavy loads on a daily or even weekly basis. I surely don't and if I was, I'd just get air bags to compensate. It's all about the look.

 

I didn't want to go to 35's because I swapped out the factory flaps for the molded ones that hang down slightly lower to prevent rock throw from hitting the panels and that would require even more modifications. I think 34's are the best I'll get and I'm ok with that.

  • Like 1
newdude Senior Enthusiast

newdude

Posted
Posted
2 hours ago, Mstorm18 said:

 

Ugh, good to know. Any reason not to get the Bilstein version of those if I go with the upgraded shocks?

 

https://cart.bilsteinus.com/details?id=2972832273118789803&fyv=true&Year=1490468497551627837&Make=7109127503953767713&Model=2312292685622996290&Submodel=2928454506658859972&Pos=Front Upper&En=3896745598793439258

 

Or is another brand a better option? 

 

 

Can't speak on them really but from quick reading at that link, they appear to be engineered for use with a lift strut like theirs so would be a good move to pair them with their struts.  It does say not compatible with lift spacers which is interesting so I wonder if there is a clearance or geometry change on these where you can't do that.  

SierraStorm21 Enthusiast

SierraStorm21

Posted
  • Author
Posted
1 hour ago, PureZ71 said:

Similar to Trail bosses, AT4 also recommends getting new UCA. I went with ReadyLift kit to level mine

 

ReadyLIFT 2" SST Kit

 

loamo1m.jpg

How long have you had it on? No issues I assume?

Ran into a friend of mine today who's in the mechanical program. Was talking about how I should have the ADAS system recalibrated after doing a level? I had planned on redoing the headlights, but hadn't thought about the cameras and other systems needing to be recalibrated. That's something I haven't seen anyone discuss on here...

PureZ71 Enthusiast

PureZ71

Posted
Posted
5 hours ago, Mstorm18 said:

How long have you had it on? No issues I assume?

Ran into a friend of mine today who's in the mechanical program. Was talking about how I should have the ADAS system recalibrated after doing a level? I had planned on redoing the headlights, but hadn't thought about the cameras and other systems needing to be recalibrated. That's something I haven't seen anyone discuss on here...

I've had it on for about two years now. Been great! even go off roading here and there.

 

My truck doesn't have any of that fancy cameras and stuff so I cant help you there. But I doubt that's an issue. I did lower the headlights a little since the kit brought the front end up (didn't want to blind people lol).

4banger Enthusiast

4banger

Posted
Posted
On 5/8/2023 at 2:48 PM, PureZ71 said:

Similar to Trail bosses, AT4 also recommends getting new UCA. I went with ReadyLift kit to level mine

 

ReadyLIFT 2" SST Kit

 

loamo1m.jpg

 

 

doesn't look level to me, bigger fender gap up front and the line under the windows is pointed uphill, looks like you just went and got a load of gravel already

 

these trucks look best with a bit of rake, and x2 on trailering or using it as a truck, I've come to realize the engineers and designers get a lot more right than we give em credit for

  • Like 3
Luc1f3r Enthusiast

Luc1f3r

Posted
Posted
20 hours ago, 4banger said:

 

 

these trucks look best with a bit of rake, and x2 on trailering or using it as a truck, I've come to realize the engineers and designers get a lot more right than we give em credit for

We occasionally get things right...😆

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...