Jump to content

Recent purchase- ‘11 Silverado- A/C question

bamafan76
 Share

Recommended Posts

bamafan76 Enthusiast

bamafan76

Posted
Posted (edited)

Hello again! After a couple year hiatus, I’m back to GM after purchasing a 2011 Silverado 4.8L V8. It is a one owner, 76k miles, overall great condition. It has the common issues, a crack or two dashboard and it had code P0573 when I bought it which I’ll fix. What I didn’t know until my 2 hour drive back home was an AC issue. After about 30-45 minutes into the drive, the air flow tremendously decreased despite turning the fan on high. I turned it off for about 10 min., turned it back on and worked a bit more and then did t again. When I got home I immediately popped the hood, saw the accumulator frozen over. I haven’t checked pressure, but the compressor does cycle. I also read it could be the evaporator temperature switch. I also found it odd there is no cabin air filter which also makes me wonder if the evaporator is dirty. Any insight would be greatly appreciated.

 

 

IMG_3759.jpeg

IMG_2718.jpeg

Edited by bamafan76
Wording
  • Like 1
  • bamafan76 changed the title to Recent purchase- ‘11 Silverado- A/C question
Jworks Enthusiast

Jworks

Posted
Posted (edited)

Have you tried adding in refrigerant?....If you have a refrigerant gauge.  I "think" its R-134A

Edited by Jworks
swathdiver Senior Enthusiast

swathdiver

Posted
Posted

No cabin filter but you can add it.

 

You need to get a bi-directional scan tool on it that can read BCM codes.  More than likely, your AC refrigerant is just fine and you have some actuators that need replacing.

 

Use GM OE only, buy once, cry once or you'll be doing it again in short order.

dna9656 Enthusiast

dna9656

Posted
Posted

"Buy Once, Cry Once. "Never heard that one! I heard "Buy Cheap You Buy Twice."

bamafan76 Enthusiast

bamafan76

Posted
  • Author
Posted

Thanks for the replies. The dealership I bought it from is making it right even though it was a “as is” purchase by taking a look at it and if they can’t resolve will send it to Chevy dealership. I’ll update on their findings once I get it back.

  • Like 1
Chris krum Enthusiast

Chris krum

Posted
Posted

My 12 Sierra has been doing this for a few months, i just got on here to check for advice. It seems like it gets worse when it idles but it will do it when i'm driving interstate also. Any advice would be great, I have 377,****** miles on it and i'd like to keep it for much longer.

Chris krum Enthusiast

Chris krum

Posted
Posted
21 hours ago, swathdiver said:

 

 

More than likely, your AC refrigerant is just fine and you have some actuators that need replacing.

 

 

can you elaborate on this a little?

Chris krum Enthusiast

Chris krum

Posted
Posted

I have noticed that the silver canister up near the fire wall sweats big time. I've checked the pressure a few times and the pressure is good. but it will start blowing warm and it will stop blowing as hard.

bamafan76 Enthusiast

bamafan76

Posted
  • Author
Posted
On 5/11/2023 at 2:07 PM, swathdiver said:

No cabin filter but you can add it.

 

You need to get a bi-directional scan tool on it that can read BCM codes.  More than likely, your AC refrigerant is just fine and you have some actuators that need replacing.

 

Use GM OE only, buy once, cry once or you'll be doing it again in short order.

Is there a scan tool recommendation that also won’t break the bank?

swathdiver Senior Enthusiast

swathdiver

Posted
Posted
On 5/12/2023 at 12:34 PM, Chris krum said:

can you elaborate on this a little?

 

The HVAC system is controlled by 4 actuators.  One of them controls whether fresh air is allowed into the cab or not, or just how much according to the computer.  Another one controls which vents the air comes out of.  Then there are 2 actuators that control the temperature for the driver and passenger side.  As these wear or when teeth break, they do not get into position like they're supposed to and hot air can leak into the cab when none is desired.  Unlike the old days, hot air is made by the system continually and "blended" in with the cold air to make the desired temperature.

 

On 5/13/2023 at 11:08 PM, bamafan76 said:

Is there a scan tool recommendation that also won’t break the bank?

There's going to be an outlay for any decent tool which will pay you back in spades because of the time and money you save on diagnosing and making repairs later on.  A Tech-2 is about $350 which is a bi-directional scan tool that can talk to just about every component in your truck, engine, brakes, radio, AC, windows, lights, etc.

 

In this case, it can read the internal BCM codes and tell us which actuators failed and why, perform tests on the other ones, command them into position and such and then when the new ones are installed, perform a proper calibration.  This would cost hundreds of dollars at a shop.

Chris krum Enthusiast

Chris krum

Posted
Posted

So after thinking about it. When I’m driving down the road, I have very cold air and then randomly it will get warm and muggy and then 5 to 10 minutes later it might get cold again.  Are y’all saying that those flaps will randomly open and close? I don’t know why they would do that…. BUT I did buy 2 actuators and Fiona replace them since I’m slow at work. I hope this works and it’s not a AC component. 

bamafan76 Enthusiast

bamafan76

Posted
  • Author
Posted
On 5/12/2023 at 6:31 AM, bamafan76 said:

Thanks for the replies. The dealership I bought it from is making it right even though it was a “as is” purchase by taking a look at it and if they can’t resolve will send it to Chevy dealership. I’ll update on their findings once I get it back.

As an update, I got the truck back today and no problems with the AC on the 2 hour ride home. They replaced (which is what I expected based on research) the evaporator temp sensor. 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...