Jump to content

Which upper control arm should I get.

2009_Suburban
 Share

Recommended Posts

2009_Suburban Enthusiast

2009_Suburban

Posted
Posted (edited)

I need to replace both my front upper control arms, more specifically the ball joint, but I figured it is easier to just replace the whole control arm. I looked for some on Rockauto, but I am not sure which brands are reputable.

Here is a screenshot of what is available from Rockauto. Is it fine if I get the cheapest ones, or will that cause problems? Which one(s) should I get?

ScreenShot2023-06-22at10_29_29AM.thumb.png.1d38569ebadf180494acc8acbe69402d.pngScreenShot2023-06-22at11_09_57AM.thumb.png.3113948a2b4c7f4bed35f98b2a012cef.pngScreenShot2023-06-22at11_03_23AM.thumb.png.8aa3e968b67a7d5c3e0da8abb996470e.pngScreenShot2023-06-22at11_02_57AM.thumb.png.4bea485b04157b9e8761846714b6f005.pngScreenshot2023-06-22at11-23-412009CHEVROLETSUBURBAN15005.3LV8ControlArmRockAuto.thumb.png.049fc118a2f17e700130515ab9cc7045.png

https://www.rockauto.com/en/catalog/chevrolet,2009,suburban+1500,5.3l+v8,1442900,suspension,control+arm,10401

Edited by 2009_Suburban
added link
CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Delphi, AC Delco or Moog are all good choice. I've bought all 3 on many different vehicles without issues.

 

The ones listed in blue are the better line of products usually.

dna9656 Enthusiast

dna9656

Posted
Posted

I went to detroitaxle.com. A local retail shop in my area uses their parts, the P/Ns on the est. worked at the cited web site. Partsgeek.com also carries the same brand as the Detroit site. You can also shop on Amazon, If your bushings are in good condition I'd change the ball joint, if not then you better change them all. Then I would consider buying the control arm assemblies. The detroit, partsgeek and amazon sites all have package deals where you get the arms, ball joints, idler arm, tie rods and adjusters for a very good price. Have fun!

swathdiver Senior Enthusiast

swathdiver

Posted
Posted (edited)

Detroit Axle is dangerous garbage.  It does not last and has failed on a few cars and trucks on these forums.

 

The upper control arms are not rebuildable.  

 

ACDelco and Moog CK Series are the same, they are a good budget option that will last a few years.

 

GM OE is what came on your car 14 years ago.  Buy them again and they will likely last just as long again.  There is none better IMO.

 

Don't think you can add disperate parts to your suspension and steering and that it will ride and handle the same, it will not.

 

Pre-Assembled struts are also inferior to GM OE.  We replace each and every piece that makes up the strut to maintain the great ride and durability.  Use a Branick or clamshell spring compressor and make sure it fits our truck springs, BTDT.

 

What trim level is your Suburban?  Does it have air ride shocks and a compressor out back or the plain suspension?  I have made a parts list if it will help.

Edited by swathdiver

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • C/K Man
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By C/K Man · Posted

      There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • nfisherman
      Software Update

      By nfisherman · Posted

      I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • newdude
      Exhaust Question

      By newdude · Posted

      Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...