Jump to content

Recommended Posts

Posted

Some people love their vehicles. My wife says unless I can find a low mileage replica. A new engine, transmission or paint job is going to happen with her car if necessary. It’s a high mileage cream puff worth about 6K. The new replacement is about 60K. So a 10K engine and transmission replacement, no problem. 

Posted (edited)
4 hours ago, asilverblazer said:

As an example, Grumpy, If, someone hit your truck and caved in the driver's door to the point it won't open and close. Repair estimate in the 4-5K maybe as high as 10K range. What would your course of action be? 

 

 

Fix it. :) 

 

Cost tells me what someone else want's. Worth is what others will pay. I don't pay much attention to worth. Worth retail? Wholesale? Private sale? Auction? Salvage? Insured total? 🤔 All are different but it's same vehicle. They exist to make someone other than me money on that trade/purchase. :idiot:Value? That is mine to determine.

 

Value is personal and her value to me is more than her worth to anyone else. Value isn't shared experience like the market is. Part of that value is in knowing that each time I put the key in her she will cost me money and that number is far lower than anything currently being build that would be a direct replacement if there were such a thing. There isn't. But that's just part of it. 

 

I bought that truck for about 50 cents on the dollar with thirteen hundred miles on it. It was headed to auction. "Nobody" wanted it. YUCK A 6!! RCSB with a 300 hp V6. My best current dealer offer was recently a few thousand more than it listed for. "Somebody" wants in now but not beat to crap and worn out. She's not for sale. But tell ya what. If she got bumped for a $10K, that cost and what I paid for it is still less than that offer. As impressive as that is....I don't care about that. 

 

She is reliable, economical in every sense of the word, sharp and fun to drive. What are they selling now that would tempt me? Nothing. They don't build this truck anymore. I can add another but not replace her. Priceless. 

 

And still, if it were compacted between to Semi trucks, unfixable. She already owns me nothing. I'm not out a penny. That sir is value. IMHO. 

 

 

 

 

Edited by Grumpy Bear
  • Like 1
Posted

Local Chev dealer sent me an e-mail with their featured vehicles. Every single one of them was an $80K+ p/u truck and sure enough when we drove by there this am on the way to an early am med procedure for my wife, same ones were lined up front row.  I would dehydrate so I wouldn't have to pee for a good while, buy a base Stingray C8, drive the snot out of it and have some fun before they had to use an engine hoist to get my old bones out. I'd rather take the depreciation on a "lightly used" life long dream than pay $80k for a gussied up utilitarian vehicle.

  • Haha 1
Posted

I let my family members buy them now days. They come over to let me drive them all proud. I thrash on them for a few minutes. Hand them back and happily drive my payment free old stuff. 

  • Like 1
  • Haha 1
Posted
17 hours ago, Grumpy Bear said:

Fix it. :) ...

 

...And still, if it were compacted between to Semi trucks, unfixable. She already owns me nothing.

Not faulting your opinion, the problem I have with 'fixing it' is that they are never the same afterwards. 

 

I factor repairability in there somewhere. Watching crash test videos, seeing the impact literally ripple from bumper to bumper, it'll never be 'straight' again. It becomes a sad story of "it was such a great truck..." I worked hard on it, took care, of it, maintained it well, it looked great... 

 

I suppose that's when you land at your last point. To me it's hard to walk away from a certain level of 'investment', whether it's taking time to fix, maintain and repair an otherwise 'unseemly' vehicle. I've had several experiences finding myself with vehicles that I put quite a bit into, time, repairs, maintenance, effort, improvements, $. For various reasons, they're no longer around, some I made money on, some I lost, some I broke even. Some I'm glad are gone, some I wish I'd kept, none of them I HAD to get rid of. Circumstances at the time just didn't warrant keeping them in the driveway. I've found that regardless, most of them aren't in my driveway much past 5 years. My favorite and best was around for about 15 years.

 

However, the current fleet, the Yukon my wife drives, and the Silverado look like they'll surpass the average, nothing new is compelling enough. 

 

The Yukon though is starting to show some age, door dings, fading plastics, more rattles, wear on the interior surfaces all cosmetic, but soon will follow drivetrain wear, wheel bearings, cv-boots/shafts, ball joints, tie-rods and bushings, many non-serviceable, 170k miles, 10 years old, close to the point where the maintenance tab is going to go up, marketable value is about to go off a cliff. To me, its end of life soon, the minor cosmetic issues will start becoming eyesores. Minor complaints will become major annoyances with no practical resolution. Finding interior rattles, nope. Recovering arm rests, new steering wheel cover, polishing or replacing plastics, fix all the door dings for a new one tomorrow. (Things a new one would be subject to, too.) Death by a thousand annoyances or one major item (a locked-up engine from poor maintenance :lol: ).

 

Just lease one. :D

  • Like 1
Posted
5 hours ago, asilverblazer said:

Not faulting your opinion, the problem I have with 'fixing it' is that they are never the same afterwards. 

 

There are a few situations where I walk away. Flood or fire damage and major hail damage. The afore mentioned trapped between two semi trucks and rolled into a ball of tin foil. Tornado and flipped on her top. :crackup:

 

But those are also salvage situations. Have an uncle that bought a 36 Ford with a 60 horse flathead that transplanted the motor/trans into numerous vehicles eventually logging a million on the power train. Valves were lapped about 300K miles. Eventually it ended up as a working display for the Anamosa School district's auto shop program. Finally laid to rest when he was. It was his first ride. 36 C cab. 

  • 1 month later...
Posted (edited)

I Wouldn't Know Where to Begin 

 

Oh I know where I would begin but I'm just one of over eight billion people on this rock. Eight billion versions of where the goal post is. How large it should be. How far to kick from. What ball is the right ball. Elevation. Age.....are you getting the point? It isn't about disagreeing with one individual. It's about agreeing only with one individual. One's self.

 

Agreement comes when multiple people hold the same point. THAT is the goal of an education. Building the Social Contract. That thing that allows us to all read this sentence. We've agreed on the alphabet and how to arrange those letters into words we agree upon whose meanings hold true for everyone entering into that contract. Those words arranged into a sentence form an idea and several sentences strung together in a paragraph convey an argument for or against or inform the reader of a state, condition or perhaps reveal a things nature. Paint a word picture. Make oneself known. 

 

This contract is not limited to words although they are often explained by words. Things like numbers and their usefulness. Physics, Chemistry, Medicine, Music, Art and so on. 

 

The frequency of middle C (C4) is 261.63 Hz is a first principle, not a suggestion. We build on that to make music we all can enjoy even if we all can not compose or play. You don't have to master it to make it enjoyable and useful. 

 

So why is the Beginning so difficult? Why is agreement so elusive?

 

Everyone "Signs" the contract (when receiving that education in obtaining it)  but fewer and fewer in this world have any intention of living by that contract. They find exploiting that contract more advantageous. Disruption. With intent. Without intent. In Ignorance. In your face. With a double dog dare you. With a hold my beer. In resistance to that contract and in spite how it looks on us. It permeates the very air we breath. 

 

In this way the contract is subject to advantage. Abide by it when it serves you, disregard it when it doesn't. Unpredictable and self-serving. Corrosive.....Toxic........

 

It says a lot about a persons character to disregard the contract, the truth, first principles. None of it good. 

 

:rant:

 

 

********************************************************

 

https://medicine.yale.edu/news-article/character-vs-personality-who-we-are-and-who-we-aspire-to-be/

 

Just an interesting article. 

 

Edited by Grumpy Bear
Posted

Disassembly may be Required!

 

Every blender makes claims but do  you ponder those claims? What was really said? Was it true?  Motive for saying it? What does in infer?  Is that inference true? 

 

Let's do one. 

 

Claim: Made from shear stable base oils. 

 

What was said: Base Oils are shear proof.

 

Was it true: Yes.  ALL base oils are Newtonian. 

 

Motive / Inference: To imply the fully formulated product is Shear Proof

 

Is the Inference true?: Most fully formulated multigrade oils contain Viscosity Modifiers or VM's, sometimes called VII or Viscosity Index Improvers. There are four types. One is in fact shear proof but it also has a bad effect on extreme cold flow and is restricted to use in specialty oils. A second has limited shear called a 0-5 SSI polymer. Meaning its shear is limited to a range of zero to five percent as reported by the ASTM D6278 Shear Stability Index test. A few high end oils, like Torco SR-5, use them and brag about it profusely. Actually all that use it point it out. The last two shear dramatically and are often marketed as a 'feature' of the product aiding the oil to meet fuel standard requirements of ever stricter rules. One shears more than 5% and the other up to 20%. As you make guess, cost is directly linked to shear down and as such the majority of oils use the cheapest organic polymers sold to make grade and pass stringent tests. 

 

PPD's or Pour Point Depressants also shear a bit, only a few percent and hide inside the 0-5 SSI capabilities. 

 

The blender knows he can not out engineer Stribeck. Physics is not a suggestion. But he can wordcraft the unsuspecting toward believing a false claims INFERENCE. This is LEGAL. It is COMMON, and it is EFFECTIVE. 

 

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Disassembly may be Required!   Every blender makes claims but do  you ponder those claims? What was really said? Was it true?  Motive for saying it? What does in infer?  Is that inference true?    Let's do one.    Claim: Made from shear stable base oils.    What was said: Base Oils are shear proof.   Was it true: Yes.  ALL base oils are Newtonian.    Motive / Inference: To imply the fully formulated product is Shear Proof.    Is the Inference true?: Most fully formulated multigrade oils contain Viscosity Modifiers or VM's, sometimes called VII or Viscosity Index Improvers. There are four types. One is in fact shear proof but it also has a bad effect on extreme cold flow and is restricted to use in specialty oils. A second has limited shear called a 0-5 SSI polymer. Meaning its shear is limited to a range of zero to five percent as reported by the ASTM D6278 Shear Stability Index test. A few high end oils, like Torco SR-5, use them and brag about it profusely. Actually all that use it point it out. The last two shear dramatically and are often marketed as a 'feature' of the product aiding the oil to meet fuel standard requirements of ever stricter rules. One shears more than 5% and the other up to 20%. As you make guess, cost is directly linked to shear down and as such the majority of oils use the cheapest organic polymers sold to make grade and pass stringent tests.    PPD's or Pour Point Depressants also shear a bit, only a few percent and hide inside the 0-5 SSI capabilities.    The blender knows he can not out engineer Stribeck. Physics is not a suggestion. But he can wordcraft the unsuspecting toward believing a false claims INFERENCE. This is LEGAL. It is COMMON, and it is EFFECTIVE.         
    • I don't recall ever dealing with one on an '06 and back. It may not even exist on that. I can't remember for sure.   Any kind of ice in or after the evaporator is normally due to low charge with both a clutch-cycling orifice tube system, and a TXV system.
    • Engines wear. It is unavoidable. So the question isn't if it will wear out but rather WHEN it will wear out. That question is about rate and RATE is a HUGE problem for almost everyone; but not in the way we may think.    Unless there is something drastically wrong with your powertrain, wear is exceedingly slow. It doesn't wear out in minutes or hours or days or months but in years or even decades. Ditto sludge and varnish. Humans are an impatient lot so to see the benefit of a truly superior product you may have to wait a very long time. Most will get bored first and trade before they reap the benefit.   Humans are not companionate creatures when it comes to those we do not know. We don't care what happens to the second or third owner as long as it doesn't happen to us or someone we know and actually like.   Sad commentary on humans but it is what it is. That thus, then, there is no advantage...to or for you if the above paragraphs adequately describe you.    BUT if you are a buy and hold type and patient enough to reap the rewards of your labors then that thing that is happening that you haven't yet seen, but will; can be abated by such products. Seals harden and leak with time and lots of it. Rings stick after thousands of miles of a slowly building plaque of varnish.    Then there is this. This didn't happen over night and this poor fellow knew when he removed the cover and not one second before.   Not "aware' isn't the same thing as "isn't happening".        The above was typical of the Ford 361 and 391 bus motors on Bulk Pennzoil Mineral Oil products on 3K mile OCI's at about 60K miles back in the 60's and 70's at the Anamosa School District when my Uncle took over their maintenance program.    This is Pepper at @ 165K on 5K OCI's using Group IV/V Full Synthetics.      HM oils will help the first but not the second.    Then again if one used..... ah, ya know.....
    • Thanks for coming back with an update. 
    • Awesome you got it sorted! That's a new potential issue I'll have to mark in my book of issues. Thanks for the feedback.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...