Jump to content

Recommended Posts

Posted

Have you checked the idle air flow valve for that cold start issue? I'll be replacing mine soon for that very same issue.

 

I cleaned it recently when I cleaned my throttle body. But not sure if it's good or not, will find out anyway.

Posted

Got my 60e ready to be shipped back to Performabuilt. Dropped my mag hytec pan to put the stock pan on

 

d49d5aaadc72f56aefa9801582f26742.jpg

 

There's supposed to be large metal flakes, right?? [emoji23]

 

Sent while in 'Murica...

Posted

Looks like your rebuilder sux.

It's funny cause he's well known all over the inter webs and I've only seen one other person on ls1tech.com have an issue with him. I'm sure oversized tires weren't helping but no reason for it to fail so soon

 

Sent while in 'Murica...

Posted

Did you do like every other guy that gets a new trans and beat the piss out of it first thing?

Posted

Have you checked the idle air flow valve for that cold start issue? I'll be replacing mine soon for that very same issue.

 

MAF wasn't the problem, so I'm going to try swapping out the IAC and see if that helps my problem.

Posted

Did you do like every other guy that gets a new trans and beat the piss out of it first thing?

Nope. Didn't take it above 4k rpm and no hard launches until the first drain and refill at 2k miles. It's just my luck with transmissions I suppose

 

Sent while in 'Murica...

Posted

Woke up early and checked everything over on my truck and topped off the tank before going to work. Supposed to be 60MPH winds and the freeway is going to probably flood before I get off work. Expecting 15" of rain and the freeway borders the ocean. Probably going to end up taking a dirt back road home tonight. So my 30 mile commute home will probably turn into a 60 mile commute home.

Posted

Looks like I'll be buying a Mag-Hytec diff cover soon so I can change out the gear oil. Since I have the oil coming out of both front and rear diffs, I'm wondering if I should pull the sucker out and put in some 3.43 gears... things to ponder.

Posted

I guess your luck is way worse than mine. Personally I'm thinking the rear end will go out first.

My factory one was with the truck till 308k and since then I've had issues. The one rear end was rebuilt with cheap parts and the last one had a rotted housing

 

Sent while in 'Murica...

Posted

Looks like I'll be buying a Mag-Hytec diff cover soon so I can change out the gear oil. Since I have the oil coming out of both front and rear diffs, I'm wondering if I should pull the sucker out and put in some 3.43 gears... things to ponder.

Do you have like 3.08 gears now? I made sure to look for the trucks with 3.42's. Luckily, all the high country's come standard with them

 

Sent while in 'Murica...

Posted

Do you have like 3.08 gears now? I made sure to look for the trucks with 3.42's. Luckily, all the high country's come standard with them

 

Sent while in 'Murica...

Yup, 3.08 gears
Posted

Yup, 3.08 gears

Never driven a truck with 3.08s. Is it really sluggish? It would be the equivalent of 3.73's in my 02 with 35's

 

Sent while in 'Murica...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...