Jump to content

LED Under Rail Bed Lighting

b1gted

By b1gted
in Modifications & Accessories

 Share

Recommended Posts

GerryLP Enthusiast

GerryLP

Posted
Posted

Your tailgate is pretty expensive too. I advise one of these for some extra assurance.

I am not affiliated with this company or anyone who may work there or sell the product.

 

http://www.jimmijammer.com/product,%20gk.htm

They have dealers here in NM. I'll look tomorrow. Thanks for the tip!

 

GerryLP :cool:

Your tailgate is pretty expensive too. I advise one of these for some extra assurance.

I am not affiliated with this company or anyone who may work there or sell the product.

 

http://www.jimmijammer.com/product,%20gk.htm

They have dealers here in NM. I'll look tomorrow. Thanks for the tip!

 

GerryLP :cool:

Your tailgate is pretty expensive too. I advise one of these for some extra assurance.

I am not affiliated with this company or anyone who may work there or sell the product.

 

http://www.jimmijammer.com/product,%20gk.htm

They have dealers here in NM. I'll look tomorrow. Thanks for the tip!

 

GerryLP :cool:

  • Replies 399
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

block8head
block8head

Here you go...

electricchiken7
electricchiken7

I installed the after market ones. I tied them into my cargo lights. Great mod!!     Sent from my Galaxy Nexus using Tapatalk    

corwest
corwest

Just as a heads up: The junction box comes with a cover for the plug that these plug into. So I made my own plug out of the cover with a couple parts from other plugs i had laying around and sealed

Posted Images

  • 1 month later...
RKeeper1 Enthusiast

RKeeper1

Posted
Posted

Can anyone tell me if I can use the original connector to the bus block for GROUND ONLY? and cut the red wire to go to a seperate switch/power.

Hengchang_Tang Enthusiast

Hengchang_Tang

Posted
Posted

Got the wire from dealer for $36CAD and order led strips + connector from amazon for 10 CAD vs 60 CAD factory install (120 dealer install) --DIY win

Plus LED strip give you brighter light

(Led is still on the way)

Hengchang_Tang Enthusiast

Hengchang_Tang

Posted
Posted

Can anyone tell me if I can use the original connector to the bus block for GROUND ONLY? and cut the red wire to go to a seperate switch/power.

I assume you can, and run the wire from some where else, but that is waste of your kit
RKeeper1 Enthusiast

RKeeper1

Posted
Posted

How so? I want a switch in the bed, not in the cab... used everything in the kit.. Just extra wire and a separate switch

Hengchang_Tang Enthusiast

Hengchang_Tang

Posted
Posted (edited)

How so? I want a switch in the bed, not in the cab... used everything in the kit.. Just extra wire and a separate switch

Then you just need any universal led (27 from Walmart. ca) and run the wire yourself. Different story if you have the bed light already Edited by Hengchang_Tang
z71 chevy Enthusiast

z71 chevy

Posted
Posted

Any one have the OEM bed light connector maybe from a second set they installed that you might want to get rid off let me know or the p/n for it can't seem to find it thanks!

Mason603a Enthusiast

Mason603a

Posted
Posted

Instead of going into cab all the time to turn it on I could just hit lock unlock on fob and lights would go on in box

THIS IS WHAT I HAVE BEEN SEARCHING FOR ALSO!

 

My question would be "Why"? I would not wire up lights to have 2 power sources... but I don't understand the reason for power from brake lights...

So that you could light up the bed for up to 2 min (maybe longer depending on your settings) simply by hitting unlock on the key fob

 

OK two questions from reading this thread.

 

1. For a second set of lights how do you power them? Plug into the same harness by the spare tire?

 

2. For adding a second switch for the lights is there a really simple and neat way to get this accomplished too?

Searching for an answer to #2 also!

 

New member here. I have tried searching all over the web for answers to the above questions/statements, to no avail.

 

Anyone out there that can hep?

Mason603a Enthusiast

Mason603a

Posted
Posted (edited)

THIS IS WHAT I HAVE BEEN SEARCHING FOR ALSO!

 

So that you could light up the bed for up to 2 min (maybe longer depending on your settings) simply by hitting unlock on the key fob

 

Searching for an answer to #2 also!

 

New member here. I have tried searching all over the web for answers to the above questions/statements, to no avail.

 

Anyone out there that can hep?

Nevermind, found this, and it is AWESOME!

http://www.gm-trucks.com/forums/topic/164156-cargo-lights-on-with-reverse-lights/

Edited by Mason603a
jakewake23 Enthusiast

jakewake23

Posted
Posted

IMG 3631

IMG 3630

IMG 3629

IMG 3629

IMG 3628

I got some aftermarket set from walmart for like 30 bucks and they worked great! i wired them to that toggle with then instead of drilling into my brand new truck i just took the plastic cap for the hauling ring slot there or whatever off and drilled a hole in it then put the toggle switch in it. It was absolutely perfect and then this way you don't have to worry about forgetting to turn the lights on while your inside the truck or something just when you get back there you flip the switch and your good to go! very happy with the results

  • Like 2
Mdavila2 Enthusiast

Mdavila2

Posted
Posted

22878806

Does this include the plug that plugs into the box under the bed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • 81mmcat
      Higher oil pressure after DFM shut off

      By 81mmcat · Posted

      Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • Coastie05
      It's Been a Long Time...

      By Coastie05 · Posted

      Welcome back!
    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...