2014+ Leveling Kits

[Aldila]

No, That one will work, but it's an unprotected Teflon socket on a steel ball that the racers use. My truck isn't a race truck. I don't want to maintain it like one either. I bought their, UCA with a regular automotive ball joint, albeit a heavier ball joint than the OEM.

 

http://www.cognitomotorsports.com/boxed-upper-control-arm-kit-715.html

 

Ok Thanks. Those arms look great! Did you install yourself?

[Spurshot]

Yes

[Spurshot]

deleted

Edited December 4, 2014 by spurshot

[Rclancy]

New photos from today

[Texas Husker]

Yes

 

This setup looks great

 

New photos from todayimage.jpgimage.jpg

 

and so does this ^^^ makes me want to ditch my 18's for 17's.

[macboarder]

This setup looks great

 

 

 

and so does this ^^^ makes me want to ditch my 18's for 17's.

That's what I did

 

 

 

[Texas Husker]

That's what I did

 

 

 

 

 

 

295/70/17 as well I think I see? Looks great!

[macboarder]

295/70/17 as well I think I see? Looks great!

Exactly ... thanks, it's just the look I wanted !

[chromanowski]

Well i pulled the trigger on some Nitto Exo grapplers yesterday, they should be here sometime next week. Ill post some pictures once i get them.

[Spurshot]

Exactly ... thanks, it's just the look I wanted !

 

Keep your overall plan of future mods in mind when deciding on wheel size. When I bought my o/s Wilwood brakes, I was told that the min size wheel was 18" (although 17s looked like they might work) for the 14.25" dia brakes I chose. There was also a 16" brake for the same price that required a 20" wheel. So, if you think you'll get bigger brakes later, research the compatibility of the wheel sizes.

[Tim813]

Will they fit? I am new to the forum. I need advice. I have a 2WD 2014 Silverado LT with factory 18" wheels. I recently had a Prolift 2" leveling kit installed up front. I have ordered LT275/70/18 Nitto Trail Grappler M/Ts to achieve a more aggressive look. They are 33.62" in diameter. My question is will they rub? Do I have enough clearance? I have read wheel well liner could be adjusted with zip ties. Is this an option? Could someone post some pictures of this? Thanks.

[Spurshot]

Your tires should fit. They'll be close in some places, maybe even rub the liner a bit, depending on the flex of the liners. But probably not. You'll be fine. And yes, you can tie back the liners. They're just plastic and you can drill a couple holes to run the ties thru.

[ddanis60]

Will they fit? I am new to the forum. I need advice. I have a 2WD 2014 Silverado LT with factory 18" wheels. I recently had a Prolift 2" leveling kit installed up front. I have ordered LT275/70/18 Nitto Trail Grappler M/Ts to achieve a more aggressive look. They are 33.62" in diameter. My question is will they rub? Do I have enough clearance? I have read wheel well liner could be adjusted with zip ties. Is this an option? Could someone post some pictures of this? Thanks.

Same setup I have but just a different tire. everything fits fine and they really fill the wheel wells nicely. Post pics when they're on!

 

 

Sent from my iPhone using Tapatalk

Edited December 5, 2014 by ddanis60

[Scott14]

Having the zone 2 inch level installed this morning at 10:30. Still undecided on perfect tire size. Won't be off road but want a better stance with no rub problems. So many options here on this thread. 2 inch level up front. Stock block in back. Using my stock 20's I need a tire choice that's gonnagive me more rubber without sticking out the sides. Thoughts?

EDIT: zone 2 inch with G2 285/55/20.

Edited December 5, 2014 by 14ChevySilveradoLTZ

[fuse36]

Having the zone 2 inch level installed this morning at 10:30. Still undecided on perfect tire size. Won't be off road but want a better stance with no rub problems. So many options here on this thread. 2 inch level up front. Stock block in back. Using my stock 20's I need a tire choice that's gonnagive me more rubber without sticking out the sides. Thoughts?

EDIT: zone 2 inch with G2 285/55/20.

show a pic

 

 

Sent from my iPhone 6

using Tapatalk