Jump to content

Recommended Posts

Posted

thinking about dipping the wheels with a setup from dip your car. Cost saving measure as of now. Household shenanigans takes priority. Lol

 

 

0's and 1's from my iPhone 6s+ using Tapatalk

 

That's my plan on the OEM 20" AT wheels.

 

DYC has black aerosols for $7 (https://www.dipyourcar.com/collections/original-solid-color/products/plasti-dip-black)

or dark gray aerosols for under $4 (https://www.dipyourcar.com/collections/original-solid-color/products/plasti-dip-dark-grey).

 

I'm going to budget 1 can per wheel.

Posted

 

That's my plan on the OEM 20" AT wheels.

 

DYC has black aerosols for $7 (https://www.dipyourcar.com/collections/original-solid-color/products/plasti-dip-black)

or dark gray aerosols for under $4 (https://www.dipyourcar.com/collections/original-solid-color/products/plasti-dip-dark-grey).

 

I'm going to budget 1 can per wheel.

think I'm going with copper metalizer. Doing light coats on wheels and badges. Hoping it looks good. Guess we will see.

 

 

0's and 1's from my iPhone 6s+ using Tapatalk

Posted

think I'm going with copper metalizer. Doing light coats on wheels and badges. Hoping it looks good. Guess we will see.

 

 

0's and 1's from my iPhone 6s+ using Tapatalk

Sounds interesting - post pics after you finish for sure.

Posted

Finally got around to putting this tonneau on. Not wheels or lift (yet) but I like it!

post-160174-0-47993900-1469142813_thumb.jpeg

post-160174-0-53274600-1469142822_thumb.jpeg

post-160174-0-47993900-1469142813_thumb.jpeg

post-160174-0-53274600-1469142822_thumb.jpeg

post-160174-0-47993900-1469142813_thumb.jpeg

post-160174-0-53274600-1469142822_thumb.jpeg

post-160174-0-47993900-1469142813_thumb.jpeg

post-160174-0-53274600-1469142822_thumb.jpeg

  • Like 1
Posted

Got my first truck this past 4th of July weekend. It is a LT 5.3L 2WD All Star Package. So far I only put Tyger Side Armor steps, have RC 2" leveling kit and BAK G2 Bakflip on its way. Currently debating if I should get some 20" either matte black or dark bronze (I like dark bronze, but I have seem much truck with bronze wheels on street, not sure if it is too weird).

 

Before side step

attachicon.gifSilverado001.jpg

 

These are the Tyger side step, looks pretty sturdy.

attachicon.gifSilverado002.jpg

 

attachicon.gifSilverado003.jpg

 

Now I need to level my truck, the leveling kit should comes in this Thursday.

attachicon.gifSilveradoB001.jpg

 

 

 

Can you get a shot from the side a little lower? Want to see how far they hang down. I dig the look!

 

Tyler

Posted

 

Can you get a shot from the side a little lower? Want to see how far they hang down. I dig the look!

 

Tyler

I just got done making a bed light system, I took some pictures in the dark, if you need more, I can take some tomorrow.

 

post-159994-0-17317000-1469168407_thumb.jpg

 

post-159994-0-17924200-1469168409_thumb.jpg

 

post-159994-0-43440300-1469168411_thumb.jpg

 

post-159994-0-62454600-1469168417_thumb.jpg

post-159994-0-17317000-1469168407_thumb.jpg

post-159994-0-17924200-1469168409_thumb.jpg

post-159994-0-43440300-1469168411_thumb.jpg

post-159994-0-62454600-1469168417_thumb.jpg

post-159994-0-17317000-1469168407_thumb.jpg

post-159994-0-17924200-1469168409_thumb.jpg

post-159994-0-43440300-1469168411_thumb.jpg

post-159994-0-62454600-1469168417_thumb.jpg

post-159994-0-17317000-1469168407_thumb.jpg

post-159994-0-17924200-1469168409_thumb.jpg

post-159994-0-43440300-1469168411_thumb.jpg

post-159994-0-62454600-1469168417_thumb.jpg

  • Like 1
Posted

Here is the bed light system that I made. I put a little twist to it, I put some high power magnet in the back of the aluminum heat sink of the LED strip, so it just stick along the side of the bed. Just for fun, I put some extra wire to it so I can stick it under the tailgate to make it into a reverse light bar (I get power from my reverse light). By the way, the color is a little warmer on the bed light, I make display LED light on my day job, so I use some leftover jewelry display case light to make the bed light. I will change it out to something around 5000k in the future to match my reverse light

 

I put 2 tap of high power magnetic to the back, I drive over some speed bump, it hold on to the side of the bed without an issue.

post-159994-0-00173100-1469168794_thumb.jpg

 

The extra wire just tuck into the hole near to top of the bed.

post-159994-0-88776200-1469168794_thumb.jpg

 

Each one of these light bar is only about 20" long.

post-159994-0-46014100-1469168795_thumb.jpg

 

post-159994-0-99320400-1469168795_thumb.jpg

 

This is just for fun, but it is one crazy reverse light. It looks much brighter in person than in picture.

post-159994-0-44748600-1469168796_thumb.jpg

post-159994-0-00173100-1469168794_thumb.jpg

post-159994-0-88776200-1469168794_thumb.jpg

post-159994-0-46014100-1469168795_thumb.jpg

post-159994-0-99320400-1469168795_thumb.jpg

post-159994-0-44748600-1469168796_thumb.jpg

post-159994-0-00173100-1469168794_thumb.jpg

post-159994-0-88776200-1469168794_thumb.jpg

post-159994-0-46014100-1469168795_thumb.jpg

post-159994-0-99320400-1469168795_thumb.jpg

post-159994-0-44748600-1469168796_thumb.jpg

post-159994-0-00173100-1469168794_thumb.jpg

post-159994-0-88776200-1469168794_thumb.jpg

post-159994-0-46014100-1469168795_thumb.jpg

post-159994-0-99320400-1469168795_thumb.jpg

post-159994-0-44748600-1469168796_thumb.jpg

  • Like 4
Posted

I just got done making a bed light system, I took some pictures in the dark, if you need more, I can take some tomorrow.

 

attachicon.gifSilveradoJuly21013.jpg

 

attachicon.gifSilveradoJuly21014.jpg

 

attachicon.gifSilveradoJuly21015.jpg

 

attachicon.gifSilveradoJuly21016.jpg

 

Nope that is perfect, thanks! Like them even more now.

 

Tyler

Posted

Where do you tap for power for the bed lights?

 

 

Sent from my iPhone using Tapatalk

Posted

2" RC level installed, I'm not feeling like I got the look I was after.

According to cab measurements I still have 1" of rake....

Any thoughts?

attachicon.gifIMG_20160719_120126343_HDR (1024x576).jpgattachicon.gifIMG_20160719_120136362_HDR (1024x576).jpg

 

Above picture is on an up hill grade, not truly flat.

 

Sent from my XT1254 using Tapatalk

 

 

same here when I first put on my 2" level. I then added another half inch spacer making it a 2.5" level then added a 1.25" RC body lift and it sits exactly how i want it.

  • Like 1
Posted

Where do you tap for power for the bed lights?

 

 

Sent from my iPhone using Tapatalk

Per the suggestion from another member, I tap it to the reverse light, so the light can be control with the remote. Every time I press unlock, light stay on for 20 sec or so.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,645 Guests (See full list)


  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...