Jump to content

Recommended Posts

Posted (edited)
2 hours ago, no12nv said:

-1.jpg

20190809_194540-1.jpg

here is my 2017 1500 . borla cat back s-type, 1" throttle body spacer, pedal commander, ranger afm mode delete, bush wacker fender flares

Edited by no12nv
Posted
1 minute ago, no12nv said:

here is my 2017 1500 . borla cat back s-type, 1" throttle body spacer, pedal commander, ranger 4cyl/eco mode delete, bush wacker fender flares

i need a lift guys .. not sure on what to do. i want to run fuel d509 deep lip 20x12 on toyo at2 extremes or nitto ridge grapplers. i hope to run 33.5 or 34 x 12.5s my front sits exactly 2.5in lower than rear. i can change rim size to a 20x9 with less offset n less lip. what do ya'll think would be best lift for what i want without going crazy? i was thinking 3.5 front n 1 rear? would that work? thanks

Posted
Just now, no12nv said:

i need a lift guys .. not sure on what to do. i want to run fuel d509 deep lip 20x12 on toyo at2 extremes or nitto ridge grapplers. i hope to run 33.5 or 34 x 12.5s my front sits exactly 2.5in lower than rear. i can change rim size to a 20x9 with less offset n less lip. what do ya'll think would be best lift for what i want without going crazy? i was thinking 3.5 front n 1 rear? would that work? thanks

sorry posted in wrong section can someone move it pls. not sure how to

Posted


How'd you fit the light bar behind your grille?


Sent from my iPhone using Tapatalk

I removed the grill shutters and mounted the light bar on bottom. I found a video on YouTube where the guy left the grill shutters on and just removed the lower half to keep the check engine light from coming on.


Sent from my iPhone using Tapatalk
Posted

I removed the grill shutters and mounted the light bar on bottom. I found a video on YouTube where the guy left the grill shutters on and just removed the lower half to keep the check engine light from coming on.

 

 

Sent from my iPhone using Tapatalk

 

So no cutting or anything besides removing the bottom grill shutters? What mounts did you use?

 

 

Sent from my iPhone using Tapatalk

Posted
 
So no cutting or anything besides removing the bottom grill shutters? What mounts did you use?
 
 
Sent from my iPhone using Tapatalk


No. No cutting. I used the stock mounts that came with the RC light bar.


Sent from my iPhone using Tapatalk
Posted


No. No cutting. I used the stock mounts that came with the RC light bar.


Sent from my iPhone using Tapatalk


Good to know, thanks. Do you have a link to the kit you used? I see a double row and a single row version on RCs website


Sent from my iPhone using Tapatalk
Posted

Met up with some friends from NY (total coincidence) in Corolla, NC.  We had a 4 car caravan rolling down the beach, 3 from NY and one from SC.  None of them had ever driven a beach before, and were quite glad they heeded my advice to air down.

IMG_5883.JPG

IMG_5884.JPG

IMG_5886.JPG

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   0 Members, 0 Anonymous, 2,300 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...