2014+ Lowering / Drop Kits

[qwank]

I'm having a hard time finding drop spindles for a 2017 4x4 with stamped steel lower control arms. McGaughy's says theirs only fit 2wd and no one else seems to make them.

[Nasty]

You have the new control arms?

[BBSkylark]

Has anyone used the 2016/2017 spindles from Crown Suspension?

[Nasty]

I think crown is the only ones who have the spindle right now for avv arms and 4wd

[qwank]

You have the new control arms?

yes, I have the stamped steel arms

[Nasty]

Crown is the Only one as of now I think

[4itodd]

Got that back end down ! Put a shackle and took out the block it lowered it about 3 1/2" ..: I don't know why the hell they sit up so high in the. Back !

Edited March 27, 2017 by 4itodd

[qwank]

Got that back end down ! Put a shackle and took out the block it lowered it about 3 1/2" ..: I don't know why the hell they sit up so high in the. Back !

did you do anything to the front?

[Nasty]

I wouldn't think so as these trucks are almost 4" higher in the rear stock

[qwank]

I wouldn't think so as these trucks are almost 4" higher in the rear stock

 

I took the blocks out from under the rear springs but I'm afraid if I do shackles before I get spindles it will look higher in the front.

 

[Nasty]

It'll sit level. The rear fender is actually lower than the front and right now the rear fender is higher than the front

[4itodd]

No I didn't do anything to the front . It's about level now 1/4-1/2" higher in the back .. looks 10xs better

[wantavant]

[Nasty]

Damn I need to go 5/9 now

[wantavant]

Damn I need to go 5/9 now

Hurry!!