Can we get a regular cab thread going? Stock, lifted, lowered?

Daly · June 30, 2019

I went up, not down. Also put the Dynapro's back on. The 420's just wouldn't balance worth a shit, so I flipped them for more then I paid for them.

Went from a 3" shackle drop, to a 1.5" front spacer. I have 5100's waiting to go on, but not till I decide what tire size I want.

I still have the 2/5 drop kit, in case i ever decide to go down again. Options are nice lol.

Edited June 30, 2019 by Daly

HeySkippyDog · July 2, 2019

Where did all these RCSBs come from?

Never saw one on the lot.

Sent from my SAMSUNG-SM-J727A using Tapatalk

Cowboyman · July 2, 2019

6 hours ago, HeySkippyDog said:

Where did all these RCSBs come from?

Never saw one on the lot.

Sent from my SAMSUNG-SM-J727A using Tapatalk

All depends on where you are in the United States.

There are quite a few dealers I have seen that stock them in Texas, Alabama and Georgia too.

I did special order mine because I wanted the blue with brown/tan inside.

Edited July 2, 2019 by Cowboyman

Nasty · July 2, 2019

California is filled with them

Daly · July 2, 2019

I see a lot more in town since I bought mine, which is often the case. Likely not a resurgence, but more you just notice them more when you own one.

HeySkippyDog · July 3, 2019

I think I have seen maybe 5 or 6 since the K2 trucks first appeared, not counting the white WTs.

When I bought my 2014, I would have loved to get a RCSB. I went with a double cab instead, and a few years later to the crew cab.

The majority I see here in Central Florida are crew cabs of various trim levels.

Sent from my SAMSUNG-SM-J727A using Tapatalk

Dinner · July 10, 2019

On 4/7/2019 at 9:10 AM, Daly said:

Found a set of barely used Nitto 420s online, so I picked them up. I have 2" drop spindles and a 5-6 rear flip kit, but I've been toying with the idea of going the other way lately. So I've been dragging my feet on putting them on.

Go low!

Edit: see you went with a level! Looks good.

Edited July 10, 2019 by Dinner

Dinner · July 10, 2019

My brother's 2016 SLE 5.3 2WD - 4/6-7ish drop

My 2018 WT Black Out 5.3 2WD - 4/6 drop

Both on 285/40R22

Nasty · July 10, 2019

My brother's 2016 SLE 5.3 2WD - 4/6-7ish drop
My 2018 WT Black Out 5.3 2WD - 4/6 drop
Both on 285/40R22

I kind of want to lift mine to a 4/6 but I'm afraid I wont like it. Yours looks good.

Sent from my SM-G975U using Tapatalk

Dinner · July 10, 2019

3 minutes ago, Nasty said:

I kind of want to lift mine to a 4/6 but I'm afraid I wont like it. Yours looks good.

Sent from my SM-G975U using Tapatalk

Don't really show in that pic very well but I like the stance on my brother's better. It's lower all around and we used the same parts. I'm about 90% happy with mine

Nasty · July 10, 2019

1 minute ago, Dinner said:

Don't really show in that pic very well but I like the stance on my brother's better. It's lower all around and we used the same parts. I'm about 90% happy with mine

The GMC trucks appear to sit lower because of the fender flares. You look like a 4/7 to me but I dont know your suspension setup

Lgetz · July 10, 2019

@Dinner your Chevrolet looks great!

The blacked out theme really sets it off compared to the chrome on the GMC. Your brother needs to paint/wrap his bumpers and grille IMO.

Dinner · July 10, 2019

9 hours ago, Nasty said:

The GMC trucks appear to sit lower because of the fender flares. You look like a 4/7 to me but I dont know your suspension setup

Makes sense. It's a Belltech 4/7 with the 1" lift shackle installed - Measures out to a 4/6.5ish but definitely has rake - I'd call it a 4/6 based on some of the other trucks I've seen

8 hours ago, Lgetz said:

@Dinner your Chevrolet looks great!

The blacked out theme really sets it off compared to the chrome on the GMC. Your brother needs to paint/wrap his bumpers and grille IMO.

Thank you! Yeah... he's talked about doing the SLT head light swap and maybe a Denali grille with some black bumpers - you never know.

Edited July 10, 2019 by Dinner

Nasty · July 10, 2019

1 hour ago, Dinner said:

Makes sense. It's a Belltech 4/7 with the 1" lift shackle installed - Measures out to a 4/6.5ish but definitely has rake - I'd call it a 4/6 based on some of the other trucks I've seen

Thank you! Yeah... he's talked about doing the SLT head light swap and maybe a Denali grille with some black bumpers - you never know.

I had both djm and bell tech lift shackle and they both made contact on the shackle mount making a squeaking sound. Do yours squeak? And can you get me a picture of them on the truck?

Marv88 · July 10, 2019

11 hours ago, Dinner said:

My brother's 2016 SLE 5.3 2WD - 4/6-7ish drop

My 2018 WT Black Out 5.3 2WD - 4/6 drop

Both on 285/40R22

Very nice trucks for sure and of course I'm a little biased towards the Chevy ?. I think your wheels add the perfect amount of "pop" to the black (I'm not a fan of this all black including the wheels trend) and the stance looks perfect to me although @Nasty will tell you mine looks like a 4wd since I haven't got around to lowering it yet!