Jump to content

Bilstein shocks thread

yanzhixiang

By yanzhixiang
in Modifications & Accessories

 Share

Recommended Posts

Powerlines Enthusiast

Powerlines

Posted
Posted

Hello all, just bought a 14 z71 2wd. Interested in upgrading to the 5100's all the way around. I have a few questions,

 

Do i need to change the springs too or are the stock ones ok?

 

I can use these to effectively level the truck if i want to right?

 

Thanks

 

Sent from my SM-N920V using Tapatalk

Keep the springs and yes the ride height adjustable 5100's will essentially level your truck

  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

bwilloby46
bwilloby46

I put the bilstein 5100s on the rear of my 14 High Country with a new 2" block a few weeks ago. Ride is unbelievable compared to stock. Liked it so much I got the adjustable 5100s for my front, remove

schloppy
schloppy

Hello, I'm not new to the forum but I just joined and figured I'd contribute to the community.   2016 Silverado 1500 "Z71" removed rancho's and swapped with Bilstein 5100's all around. So after d

Jullian is not my name
Jullian is not my name

I just got done with installing my 6112's on my 2014 GMC Sierra Crew Cab.  Reading some install guides on here really helped, along with printing some Chilton Repair guide torque specs that I got from

Posted Images

noleguy83 Enthusiast

noleguy83

Posted
Posted

Keep the springs and yes the ride height adjustable 5100's will essentially level your truck

Perfect thanks!

 

Sent from my SM-N920V using Tapatalk

cpttimerestraint Enthusiast

cpttimerestraint

Posted
Posted

I just installed the 4600s on the rear and they are awesome. Night and day difference. Now I am trying to figure out replacing the fronts.

 

Sent from my SM-G900V using Tapatalk

Barnes16 Enthusiast

Barnes16

Posted
Posted

Just installed the 5100s on the front at the highest setting which gave me +2" at the front wheel wells. I was measuring 35.5" in the front and 39" in the rear before the install.

 

I was a little nervous about going to the highest setting because of a lot of the comments about the the ride being poor at that height. The ride is much better than stock. I am new to these trucks so I might just not know any better though.

 

b24da5d298a19ce07e19f3d0a4af94ea.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Powerlines Enthusiast

Powerlines

Posted
Posted

Just installed the 5100s on the front at the highest setting which gave me +2" at the front wheel wells. I was measuring 35.5" in the front and 39" in the rear before the install.

 

I was a little nervous about going to the highest setting because of a lot of the comments about the the ride being poor at that height. The ride is much better than stock. I am new to these trucks so I might just not know any better though.

 

b24da5d298a19ce07e19f3d0a4af94ea.jpg

 

 

Sent from my iPhone using Tapatalk

Good to hear. Getting all 4 replaced tomorrow with stock 18's as well.

srgjigpog Enthusiast

srgjigpog

Posted
Posted (edited)

Just installed the 5100s on the front at the highest setting which gave me +2" at the front wheel wells. I was measuring 35.5" in the front and 39" in the rear before the install.

 

I was a little nervous about going to the highest setting because of a lot of the comments about the the ride being poor at that height. The ride is much better than stock. I am new to these trucks so I might just not know any better though.

 

b24da5d298a19ce07e19f3d0a4af94ea.jpg

 

Sent from my iPhone using Tapatalk

Any pictures of the rears installed?

Edited by srgjigpog
Barnes16 Enthusiast

Barnes16

Posted
Posted

Any pictures of the rears installed?

I only did the fronts right now.

 

 

Sent from my iPhone using Tapatalk

tootall87 Enthusiast

tootall87

Posted
Posted

 

Thanks for posting that. We do text during normal business hours! Or call us at that number. Or email us! Or Pm US, or Message us on facebook.

 

Got your text Corey, you ordered with Spencer which means your shocks should be shipping out today via Bilstein. Youll see them before the weekend.

 

Thanks!

 

Anybody home?? I've texted, emailed, called with no answer. I ordered on 5/7.

spencer52356 Enthusiast

spencer52356

Posted
Posted

Good Luck Tootall87, I placed my order on April 26th. I did receive the fronts finally but now I'm waiting on the rears. I did finally get ahold of Robert at MRT and he said he would call his rep @ Bilstien and get back to me but that was early last week and I have yet to get an answer. I called Bilstien myself yesterday and was told the rears are on backorder and 5 weeks out. Don't expect any communication because it's nonexistent. Sure would of been nice if there website could inform us that things are on back order when placing it in the cart.

  • Like 1
Bvonscott Enthusiast

Bvonscott

Posted
Posted

??? Man I ordered my rear 5100's from Amazon and got them in 2 days. And they even sent a replacement for one that was the wrong model for my truck and they sent a free replacement the next day. So I have an extra free shock lol. I got the 33-238319

tootall87 Enthusiast

tootall87

Posted
Posted

Good Luck Tootall87, I placed my order on April 26th. I did receive the fronts finally but now I'm waiting on the rears. I did finally get ahold of Robert at MRT and he said he would call his rep @ Bilstien and get back to me but that was early last week and I have yet to get an answer. I called Bilstien myself yesterday and was told the rears are on backorder and 5 weeks out. Don't expect any communication because it's nonexistent. Sure would of been nice if there website could inform us that things are on back order when placing it in the cart.

Got a call from him as well. Similar story, rears on backorder. Sending me the fronts now, rears when they get in. A simple email explaining that would cease all confusion and frustration.

Powerlines Enthusiast

Powerlines

Posted
Posted (edited)

Just had all 4 put on the truck and ended up with a 1.5" rake with the fronts being at the highest setting(was thinking it would be less). I also noticed the boots were installed up but I thought I read that a 2016 should go boot down? What difference if any does that make?

 

Before

4ad52f4634efbacd03e4ee2538ed3490.jpg

 

After

ae22968f5d36aa806ca668f37c94cc69.jpg

 

 

Rears

e7ec45e47a177e0c5a8990919c770f45.jpg

Edited by Powerlines
Barnes16 Enthusiast

Barnes16

Posted
Posted

Just had all 4 put on the truck and ended up with a 1.5" rake with the fronts being at the highest setting(was thinking it would be less). I also noticed the boots were installed up but I thought I read that a 2016 should go boot down? What difference if any does that make?

 

Before

4ad52f4634efbacd03e4ee2538ed3490.jpg

 

After

ae22968f5d36aa806ca668f37c94cc69.jpg

 

 

Rears

e7ec45e47a177e0c5a8990919c770f45.jpg

From what I have read, the Bilstein stickers should be right side up so they can be read which would be boot down. I don't know what kind of difference it makes though.

 

I also ended up with 1.5" of rake. Actually that is only the drivers side. My rear passenger side sits almost 1" lower than the driver for some reason; not sure what I am going to do about that or what is causing it yet.

 

 

Sent from my iPhone using Tapatalk

Powerlines Enthusiast

Powerlines

Posted
Posted

From what I have read, the Bilstein stickers should be right side up so they can be read which would be boot down. I don't know what kind of difference it makes though.

 

I also ended up with 1.5" of rake. Actually that is only the drivers side. My rear passenger side sits almost 1" lower than the driver for some reason; not sure what I am going to do about that or what is causing it yet.

 

 

Sent from my iPhone using Tapatalk

Thanks for the info. Got ahold of the shop and although he said it's doubtful they installed then upside down, they'll swap them around next week. Here's some info I found on the orientation

 

http://www.truckspring.com/blog/post/2014/05/28/can-i-mount-bilstein-shocks-upside-down

mookdoc6 Senior Enthusiast

mookdoc6

Posted
Posted

Count me in on the 5100's! I liked the shocks so much for the rear I bought the fronts almost immediately. After testing the OEM's the other day when I swapped out the passenger side shock was already sticking 3/4's on travel? Junk, most of you have already commented and the factory Shocks are straight JUNK!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,881
    Total Members
    8,960
    Most Online
    tararebecca
    Newest Member
    tararebecca
    Joined

  • Who's Online   2 Members, 1 Anonymous, 521 Guests (See full list)

  • Latest Articles

  • Posts

    • tararebecca
      2027 GMC Sierra: Official Discussion

      By tararebecca · Posted

      I agree, simplicity and reliability matter more as vehicles get more complicated. A V8 work truck option with fewer electronic features and a stronger warranty would definitely appeal to a lot of buyers who use their trucks for real work. Customizing it with trusted outfitters is often the best way to get exactly what you need
    • artistemorbidity
      2026 Sierra 1500 Denali - Sound upgrade?

      By artistemorbidity · Posted

      I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • newdude
      Me too……..

      By newdude · Posted

      The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • CamGTP
      Injector update

      By CamGTP · Posted

      Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...