Jump to content

Recommended Posts

Posted

Hi there Everyone!

 

I REALLY need some help here and I am Not finding the solution anywhere.

Because the current factory headlights SUCK!

 

I purchased a HID Kit from xenonpro.com for my 2014 GMC Sierra All Terrain.

The first purchase was from ebay and they only sold single beams. Where as this company had the Dual Beam Xenon. They claim 100% German Made. (So What)

and it cost total $122.45 with free dilevery. Approx $22.00 was in upgrades.

I received the following: in the Upgrade System

2 Xenon Bulbs (9012)

2 Wiring Harnesses (no inline fuse)

55watt Ballast (upgrade from 35 watt, $11.00 upgrade)

2 Capacitors(suggested upgrade at $9.99)

Mounting brackets

FULL LIFETIME WARR...yada...yada yeah!

 

Problem:Wiring is simple Right? IT is suppose to be Plug and Play? All polarity is matched up and rechecked. All connectors fit with no forcing

 

Power source-(old lamp connect)-Capacitors-Ballast-Wiring Harness-HID Lamp.

Drill factory lamp covers 25mm, then insert line and mount.

Tested before mounting Works fine.

I only installed the Easy/Left side. Truck starts, Lights go on, Both Beams Hi/Lo work. I drive five minute and pull in and see NO LIGHTS ON ANYWHERE!

Trouble shoot to Parking Lamp Fuse (10a) was burned out.

I replaced factory bulb and all lights work!

Should I have received a relay-wiring Harness to power off battery?

 

WHAT AM I DOING WRONG?

signed Steve

Posted

Update....

Well It was one of the connectors I was installing reversed polarity!

I know, Imadumbass!

These after market clips ARE made to do this in some applications.

Anyway. I had one of the capcitors reversed and turned it to Red-Red/Black-Black

 

Is that why they color them different?

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...