Jump to content

a/c line bracket

brokesilverado
 Share

Recommended Posts

beetle Enthusiast

beetle

Posted
Posted (edited)

I bought my '14 in January of 2014, build date 6/13, no a/c bracket and no issues so far.

Edited by beetle
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

CARMELHILL
CARMELHILL

I posted this on the other A/c thread, but her ya go....   I finally have a chance to post.   My dealer took my 2014 GMC Sierra in without an appointment, gave me a Cadilac STS loaner (blah), and

Silverado Steve
Silverado Steve

For those of you who added the bracket, can you talk us through whereabouts the brackets should be located. I tried finding it based off the sandyblog attachment, found the condenser (on the viewers

JRL1164
JRL1164

Thanks for the info guys. $10 preventative maintenance is ok with me. Shame it wasn't designed prior to but at least they acknowledged the problem and designed a fix.

Silverado Steve Senior Enthusiast

Silverado Steve

Posted
Posted

Sticker on the bottom of the driver side door jam

 

How do determine your exact build date?

Sent from my SM-G930R4 using Tapatalk

Silverado Steve Senior Enthusiast

Silverado Steve

Posted
Posted

You'll have to getbthe daler to pull that for you.

 

Just says month and year. I want the exact day.

Sent from my SM-G930R4 using Tapatalk

  • Like 1
15 Z71 Senior Enthusiast

15 Z71

Posted
Posted

You'll have to getbthe daler to pull that for you.

 

 

My truck had a slip in with the owners manual and other suff in a bag in glove box that had the day it was built.
Silverado Steve Senior Enthusiast

Silverado Steve

Posted
Posted

Yeah i wish mine had a slip in the owners manual. I just asked my service advisor off the cuff when i waiting for them to pull my truck out of the service bay after finishing a repair last year.

 

 

My truck had a slip in with the owners manual and other suff in a bag in glove box that had the day it was built.

15 Z71 Senior Enthusiast

15 Z71

Posted
Posted

Yeah i wish mine had a slip in the owners manual. I just asked my service advisor off the cuff when i waiting for them to pull my truck out of the service bay after finishing a repair last year.

 

 

Yeah I was surprised when I saw it. It was almost built on my birthday. Lol
Ag76 Enthusiast

Ag76

Posted
Posted

I pm'd one of the GM reps on the forum and gave them my VIN. They replied with my build date, 10/10/14.

 

How do determine your exact build date?

Sent from my SM-G930R4 using Tapatalk

 

  • 7 months later...
afireinside7444 Enthusiast

afireinside7444

Posted
Posted

Great mine is a March 2015 build. No AC muffler, no bracket. Im going to see if i can get it in for a few small things. If not ill just buy the bracket and install myself. I need to try my AC been noce havent used it since August

 

AC bracket, tailgate drops fast, driver seat cover bolster wear and airbag reprogram.

  • 2 months later...
Powhatan Enthusiast

Powhatan

Posted
Posted

2015 Silverado 1500 double-cab, 5.3 V8, 6 Speed Trans, Manufactured 11/14, Ft. Wayne Assembly

 

30,432 miles - No A/C cooling on either driver or passenger side, no obvious condenser leak noticed. Dealer said located A/C dye on the bottom side of the A/C compressor to condenser hose. Removed and replaced hose # 23438932 and added support bracket 23264893 per bulletin #PIT5331, recharged system, labor time 1 hour. No cost, warranty service.

  • Like 1
  • 3 years later...
KOZ45 Enthusiast

KOZ45

Posted
Posted

Anyone try two part aluminum epoxy for a cracked line patch?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...