Jump to content

Recommended Posts

Posted

I have a 2015 Sierra 5.3 that does not have the $100 FlexFuel E85 option. I've had FlexFuel trucks before this, and like the option to run E85, but this truck does not have the option. All 2014 5.3s are E85 capable, and the 2015s have it as a standalone $100 option. I did some research on what exactly the $100 option gets you, and I'm pretty sure it is just the yellow colored gas cap. According to GMpowertrain.com, and all parts information I can find, there is NO difference between the E85 and non-E85 5.3. GM Powertrain says the 5.3 is E85 compatible, period.

 

So, I decided to run a couple tanks of E85 to see what happens. Turns out, it runs E85 exactly as I would expect and have seen from my previous FlexFuel trucks. It cranks a little longer on cold start, as others have reported. It get less MPG, maybe 20% less. It idles smoother and feels much more responsive than on 87 octane gas. I had to pull out into 50mph traffic from a stop so I hit the gas pretty hard, the truck smoked both rears and stepped sideways a little bit. It is not that responsive on 87 gas.

 

I also noticed that the truck seems to hold higher gears more, rather than downshift early. I think on 87 octane gas it will downshift much sooner as an anti-knock protection, to prevent a load on the engine at lower RPM. If I would breath on the throttle with 87 gas it would want to downshift. This makes sense, but it also tells me the engine computer is sensing and adapting to E85. It also runs in V4 mode more often and longer on E85, another sign the engine adapts to E85. It is also injecting more fuel with E85 (as is expected with a flexfuel engine), so it must be measuring ethanol content.

 

I'm convinced the $100 E85 option is nothing more than the yellow gas cap and a way for GM to offer a choice. I wonder if there is some advantage to GM in CAFE or fuel economy calculations by having E85 as a customer option, versus a factory default. I see a very noticeable difference in smoothness and responsiveness on E85, and I like how it holds a gear longer. I think I'll try a couple tanks of 93 octane next then 89 octane, to see if there is any difference.

  • Like 2
Posted

I just read your thread on your E85 conversion, wow that is impressive! I did not know there is a separate fuel sensor (didn't see that documented in the parts diagrams I found). I may rethink running a lot of E85, although I gotta say it seems to run it just fine and the truck feels so much better I may do it anyway! It even shifts better. I wonder if it could be using the O2 sensors or some other way of measuring ethanol? My truck seems to be adjusting to E85 just as I have experienced and would expect from a FlexFuel engine. The injectors and fuel pumps are rated for higher flow, and the computer is commanding more fuel flow as it should.

  • Like 2
Posted

Did you put e85 in on empty? If not, you might have had enough regular to keep it sain.

 

Sent from Tapatalk App - Samsung S6

Posted

Yeah, and I'm on the second tank. It is probably more like E60 here in the winter, but still makes me wonder how it is adjusting.

  • Like 2
Posted

I have been running blended 93 & E85 (E85 in lower amount) on my '16 which is not a FFV. I have noticed that the engine runs better than running on straight 93, but I'm unsure if it ran as well as my '15 which was a FFV. I checked the undercarriage and there was no sensor for ethanol content; the electrical connector just sat there disconnected.

Posted

I used to run e85 in my last car. I ran it for 30,000 with no problems it was not ffv either. I bet the ECU has the ability to tune for e85 it will just take much longer without the sensor. My guess would be 2-3 tanks?

  • Like 1
Posted

To each their own. I think the difference between non FFV and a FFV may be more than known.

Posted

Yeah, and I'm on the second tank. It is probably more like E60 here in the winter, but still makes me wonder how it is adjusting.

 

My last tank of e85 is reading 60% alcohol, so you are probably right with your guess.

Posted

Without the alcohol sensor (included with the E85 option) you won't get the horsepower and torque benefit of higher fuel rates in the programming tables for the E85. (and blends)

Posted

I've been running E85 in my 02 for a couple months now. No issues at all other than hard starts on cold morning as in when it is down to 29°F out. It runs smoother and seems to have more power.

 

One other benefit is my used oil analysis came back this last time looking way better than any of my previous UOA's. I also like the fact that E85 here is now $1.16 a gallon. Nice to fill up for under $30. Yeah, my mpg took a hit but when I calculate it out, the cost difference for E85 and 93 I'm still ahead running the corn juice.

Posted

93 in a 6.2 i understand but why in a 5.3? unless it is tuned to run on it. A stock 5.3 requires no more than 89 (87 mfr recommended) at best so why the added expense of higher octane? Here 91 is roughly 50 cents more a gallon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,804
    Total Members
    8,960
    Most Online
    LCH14
    Newest Member
    LCH14
    Joined
  • Who's Online   6 Members, 0 Anonymous, 966 Guests (See full list)

  • Latest Articles

  • Posts

    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
    • Atlas won.   I know better, but I did it anyway. I took a compressed air line with a chuck and rubber tip and jammed it in the open EGR port. The port was clear as far as I could see, and as far as I could poke with a flexible wire, but that doesn't mean it's not clogged.   Compressed air blew back at me along with a cloud of black. Oops. I didn't have the rubber tip seated in there all the way. Jammed it up in there some more and squeezed the chuck. PSI was set to 120. Poof! It blew back at me again. Third time...pfffffttssssssspffffffsssfffffff, face full of carbon, and then, kind of a thud..and the air stopped spraying back at me. It was now exiting the exhaust with a low shhhhhh sound as it flowed through the pipe. Something broke free. I pressurized the port again, and air flowed.   Made my day.   Long story short on this problem, it's fixed. Something was really blocking the EGR passages down low, and compressed air blew it apart. I don't recommend this as who knows what debris was sent where. But it's allowed me to move forward, mentally, and onto the next problems I need to get this little S-Blazer going down the road properly again.  
    • Your truck lowered, looks good. I'm happy with the stance on this. I may need the extra ground clearance given my location/situation.
    • With this new pan, do you still use the same procedure to check the level? Its a deeper pan and our trucks do not have a fill tube/dipstick. So fill till fluid runs out the check plug?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...