Jump to content

2013 Silverado 1500 Tailgate rubbing lower right side (pics attached)


Recommended Posts

Posted

Hello all,

First time post here, noticed today that when lowering my tailgate it would "creak", this was out of the norm so I started looking for lubrication points and found it is rubbing on the lower right side, I've attached pics. Does anyone know how to adjust this out or had this problem and resolved it?

 

https://dl.dropboxusercontent.com/u/91243780/20160730_101530.jpg

https://dl.dropboxusercontent.com/u/91243780/20160730_101612.jpg

20160730_101612.jpg

Posted

never mind folks, looks like some ahole did a hit and run, pics from jun 23 to jul 13 show that the right side bumper was pushed in some and the gap changed on the tailgate...

 

 

20160623_084303.jpg

 

 

 

20160713_084747.jpg

Posted

It looks like your bedside has been pushed in it should be even with the taillight and in the one pic it looks like you have a line behind the bumper like maybe you've been hit. To remedy take a 2x4 block and a hammer and tap the edge to move it over.

Posted

That seems to be it, guess i'll work it over with a block o' wood and hammer, the bumper doesn't seem to be rubbing at all and nothing under looks to be moved or crinkled. Damn shame we can't live in a world where someone takes ownership for their mistakes. I've more than once had to leave a note on a car letting the owner know me or my wife misjudged distance and put a ding on their vehicle

Posted

Worked like a charm, now just need to touch up the rubbed area, got down to metal on a couple spots

 

It looks like your bedside has been pushed in it should be even with the taillight and in the one pic it looks like you have a line behind the bumper like maybe you've been hit. To remedy take a 2x4 block and a hammer and tap the edge to move it over.

20160730_120752.jpg

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Interesting, I suspect I would have fueled up in Lee Vining as the day prior I would have filled up either in Laughlin or near there and maybe again before I entered Death Valley and once out the other side late that evening as I kept on driving into the night up near Lee Vining. Next morning I most likely fueled up in LV before heading over Tioga Pass into ( as I refer to it as "Yose .... Mite" 😁 ). And again that was 19 years ago but the price then must not have jumped out at me like the 5 bill a gallon theme of nutty cult hippy country Big Sir or head so far up their rear Aspen. I'd be curious to know where the highest prices are in the lower 48, I probably would not be far off to guess somewhere in Cali forn ie. Coldfoot and Prudhoe bay may have those prices beat but that is a whole other world up there and when prices are more normal elsewhere that is about what they can be up there I believe in no mans land. Anyway interesting that the 395 corridor is hosing people and the thing is, its tourist season and its not like there are a lot of competition options when driving up that highway from what I could see. Yup, big ole Boaterhomes and various other RV's ahead and behind me at the Yosemite entrance gate and they have to get their fuel somewhere.  
    • Those can be high, as well as the big California cities. The ones that will pop your eyes out are the 395 corridor on the Eastern side of the Sierra Nevadas. Lee Vining, $7.19 for regular and $8.89 for diesel is what the Google said right now.
    • Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.     Here's a version of the L87 recall with the p/ns for all the parts needed.    RCRIT-25V274-7075.pdf   Note it shows 19420611 and 12740076 with an asterisk to a footnote "Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which part to order if two or more part numbers are listed for the same part, as it may vary by vehicle options."    
    • Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...