Jump to content

Recommended Posts

Posted

He did tell me to bring it to another mechanic.

 

 

^

I think you meant to post "towed to another mechanic" as in on a roll off, you really shouldn't be driving this thing anywhere.

Posted

Thanks for your insights. I still drive it everywhere. I can only make it Happen in the same spot. I will bring it to a mechanic soon and let y'all know what the problem was. I've heard that sometimes with new cars you have to update the computer software because cars no have electric powered steering.

Posted

Oh and it's silver. I tested it in my neighborhood (same speed and angle,, etc) nothing happened.

Glad it's a different truck.
Posted

Thanks for your insights. I still drive it everywhere. I can only make it Happen in the same spot. I will bring it to a mechanic soon and let y'all know what the problem was. I've heard that sometimes with new cars you have to update the computer software because cars no have electric powered steering.

Software updates are pesky things now a days. It's possible that a software update could fix, but I really think something is killing the electrical system. I think that is why you get all the warnings as the network dies and sometimes it extends to the engine controls.

 

Just to rule out anything in the steering assembly, find a big parking lot and start doing circles. Slowly tighten the circle until you're at full steering wheel lock. Go both ways. If you don't get anything there, go back to where it does happen. Try it over and over again, but with different things on/off. Heater, blower, radio, headlights, heated steering wheel, etc. And see if any of that changes anything.

 

Anything unusual, odd, different about the location that it does happen at? Anything cell phone towers or anything? Note time of day, all that. If you can provide the shop with anything useful, it could save yourself some money or you could figure it out.

Posted

Hi! My 2014 Chevrolet Silverado LTZ runs great and drive great. Love it. One problem though... my steering wheel locks up and I will get 3-4 quick messages saying Intellik, stabillik, and park assist off. (Spelling is off for sure because I can't read them in time) it happens when my foot is off the acceleration and turning. It ONLY occurs in my friends neighborhood entrances!! Weird!! Never happens anywhere else. Usually the steering wheel locks up for 2-3 sec but today it lock up and I went up on the curb and the engine shut off. I drove home fine though. Any thoughts??

 

Hi! My 2014 Chevrolet Silverado LTZ runs great and drive great. Love it. One problem though... my steering wheel locks up and I will get 3-4 quick messages saying Intellik, stabillik, and park assist off. (Spelling is off for sure because I can't read them in time) it happens when my foot is off the acceleration and turning. It ONLY occurs in my friends neighborhood entrances!! Weird!! Never happens anywhere else. Usually the steering wheel locks up for 2-3 sec but today it lock up and I went up on the curb and the engine shut off. I drove home fine though. Any thoughts??

I have a 2014 Sierra with 74,000 miles. I am having the same problem. I had the exact same issue right after I bought the truck a little more than a year ago when it had 64000 miles. truck will completely stall for 2-3 seconds and flash the service stabilitrack. Al the lights will flash on dashboard as well. Took to dealership and they said it was simply a loose battery terminal. they charged me a diagnostic fee and that was it. Everything was good up till yesterday when I went to make a U-turn and it did it again. I had my kids in the truck and almost got creamed by oncoming traffic! I am truly PISSED! There is no loose terminals any where I can find this time. This truck is scary to drive and I will not put my kids in it again. Nothing like buying a $30,000 truck and being scared to drive it. Gm needs to figure this out because people will die because of this issue if they havnt already. I feel like my local dealership is out to try and avoid fixing anything they don't have to. Taking to dealer tomorrow and will report back when I hear from them, if I don't die on the way there! If anyone from GM reads this I hope yall understand your dealing with peoples lives here and this is serious.

  • Like 1
Posted

Dayton,

 

Document it all the best you can and I'll bet your attorney can get answers. Locking steering wheels while on motion is like smoking in a dynamite factory.

  • Like 1
Posted

 

I have a 2014 Sierra with 74,000 miles. I am having the same problem. I had the exact same issue right after I bought the truck a little more than a year ago when it had 64000 miles. truck will completely stall for 2-3 seconds and flash the service stabilitrack. Al the lights will flash on dashboard as well. Took to dealership and they said it was simply a loose battery terminal. they charged me a diagnostic fee and that was it. Everything was good up till yesterday when I went to make a U-turn and it did it again. I had my kids in the truck and almost got creamed by oncoming traffic! I am truly PISSED! There is no loose terminals any where I can find this time. This truck is scary to drive and I will not put my kids in it again. Nothing like buying a $30,000 truck and being scared to drive it. Gm needs to figure this out because people will die because of this issue if they havnt already. I feel like my local dealership is out to try and avoid fixing anything they don't have to. Taking to dealer tomorrow and will report back when I hear from them, if I don't die on the way there! If anyone from GM reads this I hope yall understand your dealing with peoples lives here and this is serious.

I think the death count was in the low teens for the ignition switches. It's now over 120. So far I haven't heard of any deaths for steering. I don't think they pay much attention until the death toll is in double digits. I couldn't see shit out of my Silverado at night. "Your good" is not the answer for something like that.

 

None of these companies really care. Chrysler has vehicles rolling out of park, Ford had vehicles dropping out park into reverse. Toyota had the unintended acceleration. Nothing is flawless. The problem is they all avoid the issue at first until they are called on the carpet by the NTSB.

Posted

Thanks for the replies. Dayton, please give us your feedback as I will for mine. I'm bringing mine in to Gerry lane GMC-Cadillac this Wednesday or Thursday. If they say something about the battery, I will tell them about your situation and how your problem continued. I've called mechanics around town and some have no clue as to what the problem might be. I think it is an electrical problem and not mechanical. Something is causing the stabilitrack to go off and then it causes it to shut off. Hopefully Gerry Lane knows what the problem is and can fix it. I'm also going to get the recals fixed while it's in.

Posted

They fixed all recal items and told me the problem was that a wheel was slipping on the turn causing traction control to stop the truck or something. So they told me to turn traction control off...

Posted

Wow..The incompetence I've heard of and expanded lately is mind boggling. So the traction control caused the truck to shut off? That's what the dealer is saying?

 

Sent from my SM-G900V using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hey guys, sorry for the confusison about this. This wasn't my experainnce, it was copied and pasted fom the net. 
    • The problem with failure rates or increase failures are there’s people who don’t have a problem. What are you doing wrong they say. We had 4 5.7 GM diesel’s in the family when they came out. One was flawless. My uncle who happened to be the most abusive. Early rotary engines were known to use oil. I abused my first car so bad in six months I replaced the clutch, transmission and rear end. It didn’t use oil. My brother in law has a 2013 Tahoe and an older Yukon. The Yukon has 280K miles. The Tahoe around 175K. He runs them to about 300K. If his lifters fail before that time he would consider it a failure. My Hondas, I know people hate it when I mention them. Identical engines. One with cylinder deactivation one doesn’t have it. One shudders when the eco light goes on or off. Cylinder deactivation. But wait! According to the web. It can happen with lock up too. So now people in the know are changing the oil and transmission fluid more often. Then you read it could be a programing issue. So what do you do? There’s lots of money involved. I see three ways to deal with it. One only works if you don’t drive lots of miles. Lease, never get out of warranty. Or only buy older vehicles with a good track record. They all have bad runs. Usually when there’s a change. Even Toyota and Honda. 
    • Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...