Jump to content

Recovery hook

Shooter1
 Share

Recommended Posts

javierh41 Enthusiast

javierh41

Posted
Posted (edited)

Trying to swap out the black hooks to chrome on my 2017 silverado 1500. Passenger side easy but the front bolt on the drivers side hits a bumper bracket. If it had been installed the other direction it would be no problem. Do you have to cut it out or is there another trick? Have seen the videos for 2014 and 15 models but 2017 is different.

Don't cut the bolt, no need. I removed mine by loosening the bracket it hits.. you have to remove 3 bolts, pry the bracket apart with flat head. wiggle it out it took about 5 minutes.

 

just re install the bolt from the other side, pretty easy.

I don't know Why GM did this but i am sure they bolt the tow hooks before installing that bracket.

Edited by javierh41
  • Like 1
  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

JimCost2014
JimCost2014

Yes, cut the bolt. If you bought the hooks from GM they come with new hardware, so no point in trying to save the old bolt by tearing off/moving things that don't need to be touched. Above poster with

No Tyme
No Tyme

NO, you do NOT have to cut the bolt. I did this last month, with the help of a you tube video on installing a bull bar a guy showed 3 extra bolts that you undo and pry up on the top piece where the he

mike67naz
mike67naz

2014-2015 correct. Changed on 2016 and up. I know, just checked this weekend, my 2016 Sierra does not have the same exposed bolts to undue.

Posted Images

DougIrby Enthusiast

DougIrby

Posted
Posted

I wonder why recovery hooks come standard on 4WD and not on 2WD, which needs them more than the 4WD's?

 

I wish I had them on my 2WD. Maybe I'll buy a pair and install them. Never know when I may need them.

Krusty Enthusiast

Krusty

Posted
Posted (edited)

Used mine a couple of times is all on the 2007 - you had to trim the plastic facia to even get a good size strap thru them. Yarded an old Ford truck out side ways once that had sat for years and broke the brakes free. Another time to brake a truck as it rolled off a trailer with the wife steering - it no working brakes of it's own.......

Edited by Krusty
  • 2 months later...
mike67naz Enthusiast

mike67naz

Posted
Posted

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

My chrome hooks slid right in. The only bitch about the entire install was the drivers side long bolt that needed to be cut to remove.

mike67naz Enthusiast

mike67naz

Posted
Posted

Plan on removing driver side tomorrow....did they slide straight in or angle or something?  I can start the long side, but short side stops for some reason....

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

They went in straight. I would measure the new hook versus the old hook, just to make sure that the new one isn't oversized.

  • 2 weeks later...
Skylane765 New Member

Skylane765

Posted
Posted (edited)

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

Edited by Skylane765
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
17 hours ago, Skylane765 said:

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

$500 for two of these????

 

I'll buy a $50 black set and pass on some fancy tow hooks.

  • Haha 1
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
On 10/27/2017 at 5:30 PM, mike67naz said:

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

 

Anyway you can tell me the stats on the bolt head to install the hooks?  I'd like to pick up two from HD (my truck is a 2WD) since I'm buying my recovery hooks on CL.

Waterfowler41 Senior Enthusiast

Waterfowler41

Posted
Posted
I just installed red tow hooks on my 2017 z71 silverado. I used a sawzall to cut the head off the head of the bolt off on the driver side. Slide the bolt out until it touched the bracket and held the head with a pair of vise grips and cut the bolt. Was a piece of cake.


How did you reinstall the new hooks without removing the bumper?

I cut my bolts for a bull bar and want to reinstall my tow hooks but see no other way other than removing the bumper.


Sent from my iPhone using Tapatalk
Huetatos Enthusiast

Huetatos

Posted
Posted

Bumper removal is pretty easy. At least on the silverado. Pull the bolts for the rear support bars on each side. Two 15mm bolts accessible on each side from the center with the grille off. Bumper will just be picked up. It weighs like 100 lbs ish.

Skylane765 New Member

Skylane765

Posted
Posted (edited)

Very easy to install, just remove the OEM stock hook and ours bolt right in its place, for the non 4x4 they will fit also just drill a 1 inch hole though the plastic cover and NO NEED TO MODIFY OR REMOVE BUMPER. All the frames of the trucks have existing holes for the tow hook receivers. if you look under the bumper you will see you can get to the frame to install them.

Edited by Skylane765
Huetatos Enthusiast

Huetatos

Posted
Posted

I'm sorry, but at 500 bucks for a set of tow hooks, that is insane. You can get the red ones from GM for 100 bucks or the black for 50. That price is way too rich for my blood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Newduramaxh*ar
      DTC P2C48 auxiliary cooling pump

      By Newduramaxh*ar · Posted

      I tried tapping it.  This might sound like a dumb question, you should feel vibration or some type of noise when it turns on? Can someone please verify? Thank you all!
    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      I feel better now for my own view point and actions or lack there of towards the dealership service theme reading your post and others. GM corporate is who offers the two free oil changes on the HD trucks and I bought my truck in Feb of 2025 and those oil change offers run out within 2 years I believe and I highly doubt I will be using either one of them. I had asked if I could officially give those free services to another customer ( a friend ) and they said no, its all a GM corporate thing based on the vehicle in question. What that service advisor did however was go into a little story about how such and such customer was denied engine warranty because he had done his own oil changes because then they are not documented ... you see where that goes and so an employee playing the game of scaring the customer into having the service work done there most certainly triggered my thought process. At a later date I did talk to the person who handles warranty claims at the dealership and she said to be sure to document the oil changes and keep receipts for the oil and filter ( coped the receipts from cases of Mobil oil and case of filters I bought from them ) and the vehicles VIN, the date of service, mileage etc and staple that together as a record I would give them if that was ever needed and I keep my own log book for services for each vehicle as well. Oh and about 8 months after I bought the truck the dealer starts calling me to offer a maintenance service since they haven't seen my vehicle show up on their system ... for the mere fee of 300.00 Canadian to change the oil and rotate the tires and a few other minor checks and I declined the offer, I get the call again a couple of months later for the same thing and she could tell I was not interested and she asked if they should take my name off the call list and I said yes, do that !.    By the way did you happen to keep your factory oil filter to open it up and see the surprises inside as I expect some will show up as per the odd little sliver of metal shaving and particles that the filter does trap along with bits of grey silicone sealer that come off of the inside edge of mating surfaces. I have cut open every filter so far on my truck although few miles but have changed the oil often and the second filter was vastly better with very little of anything, that first filter was the unsettling one as I expected it would be. 
    • OnTheReel
      OCI, not when but why?

      By OnTheReel · Posted

      I get why they do this…but man…not ideal. I only extract on inboard boat engines because the drains are buried and even then I hate it because it’s easy to leave a quart behind with that method.   They should market it as an “oil refresh” not oil change!
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      I only get oil changed where I can watch. Valvoline pulls through the dipstick into a see thru glass. When done they show me the dipstick. About the only way they can mess up is using the wrong oil. But that secret wouldn’t stay secret long. Honda uses TQ wrenches on everything. You can watch through a plate glass window. Discount tires does that with tires. Trust but verify. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I would not argue that with you. It would be pointless to argue against the truth and you speak the truth.    My question and in fact the entire point of this thread is an exploration into the levers of wear which happens no matter how well we maintain our powertrains.    Some of these levers we exert a good deal of influence over which can and do result is lower wear, longer powertrain life. Some others we are sort of stuck with.    An engine is typically done when the ring to bore seal no longer is able to do the job effectively. Normally the first thing to go in a engine otherwise well maintained and adult driven is this seal.    Looking into the means, methods, products and attitudes that influence the rate of wear seems a worthwhile inquiry to me.     

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...