Jump to content

2015 GMC Denali Driverside Daytime running lights not working

JoeyCreech
 Share

Recommended Posts

JoeyCreech New Member

JoeyCreech

Posted
Posted

My driverside running lights work only when the truck is automatic started. When the key is inserted they go off. I was wonder had anyone else ran into this problem. Thanks in advance

2017HD Enthusiast

2017HD

Posted
Posted

Running lamps only come on when the headlights are on - or in the case of remote start - or when the parking lights are turned on manually.

 

So to test things - use the light control knob to turn the parking lights on and off - make sure that all the lights go on and off with this control.

 

They should also go on with remote start - and go off when the key is turned on - during daylight hours -but remain on at night.

  • 4 months later...
Grayson Pippin Enthusiast

Grayson Pippin

Posted
Posted

I have the same problem on my 2015 silverado. Right side works great. Left side drl not coming on. Lights work fine at night, but the drl only works on the right side. Has anyone found a solution to this problem? 

  • 5 months later...
Grayson Pippin Enthusiast

Grayson Pippin

Posted
Posted

To follow up on this, the instructions said to tie into one side and run the wire to the other headlight. This was causing the drls not to work on the far side. I ended up tying into the key on power on both sides and that solved my problem.

 

Hope that helps

cdh027 Enthusiast

cdh027

Posted
Posted

I've seen a ton of GM's driving around with one drl on, including my own 2009 CTS I used to have. 

  • 5 weeks later...
redwngr Senior Enthusiast

redwngr

Posted
Posted
On 8/4/2018 at 9:40 AM, cdh027 said:

I've seen a ton of GM's driving around with one drl on, including my own 2009 CTS I used to have. 

GM's 'signature' look for the last 15 years or so...

 

(once they get some time/miles on them)

bedsaul New Member

bedsaul

Posted
Posted

Whats crazyier. The automatic control lights are now using the same bulb as the signal. The signal works so it's not the socket. Makes no freaking sense. 

  • 8 months later...
MntDewMonkey3 New Member

MntDewMonkey3

Posted
Posted

The signal and the running lights are the same bulb, two filaments inside. I had one that wasn't working, replaced the bulb and now it works. If one hole side is out it could possible be a fuse but if the blinker works on that side then it's probably the bulb.

  • 5 months later...
Sully_907 New Member

Sully_907

Posted
Posted

2015 2500 SLE drivers side drl was out. Blinker would work but not the drl. I changed the bulb and it works again but the right side drl stopped working right after changing the left. Maybe a bad fuse? 

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...