Jump to content

Recommended Posts

Posted
Update, I received the Echomaster Intellahaul front camera system.  Extremely easy install.  Just watch the videos on Youtube by Echomaster.  The hardest part was going through the firewall.  There is a rubber grommet, where the main wiring harness goes through, but there seems to be multiple layers to it and under the dash you can't seem to get your hand through all the mechanicals to even get to the grommet.  In about an hour or so it was complete.  The instructions state to put the camera right under the bowtie but I chose to go lower after what Jmiller11331 recommended.  All in all I am very happy with the result. 

 

What part number did you go with? I’m only seeing options for the 2018, but i figure it will probably work on my 2015 Sierra. Thanks.

 

 

 

Sent from my iPhone using Tapatalk

Posted
1 hour ago, Alex2015sierra said:

 

What part number did you go with? I’m only seeing options for the 2018, but i figure it will probably work on my 2015 Sierra. Thanks.

 

 

 

Sent from my iPhone using Tapatalk

I bought the Single Front Camera System for $399.   I have a 2017 and yes, I also bought the 2018. 

 

Part # 19366657

 

Hope this helps!

 

  • Like 1
  • 2 weeks later...
Posted

I used the backup camera for my Garmin and mounted it above the M in the grille of my 17 GMC. You have to look really hard to see it. Instead of using a switch, I wired it so that it changes from GPS to front camera whenever I press on the brakes. Real handy when I am parking close to anything in front of me.

Posted
9 hours ago, DJG said:

I used the backup camera for my Garmin and mounted it above the M in the grille of my 17 GMC. You have to look really hard to see it. Instead of using a switch, I wired it so that it changes from GPS to front camera whenever I press on the brakes. Real handy when I am parking close to anything in front of me.

Great idea.  Backup camera kits often come on sale for less than $100 at my local auto store and I often wondered if these would work well as a front camera.  They don't advertise these products as having the option of being used up front but I don't see why not.  Of course they wont be integrated with your dash display but an additional small screen dedicated to this purpose would look fine when considering the money saved!

  • 2 weeks later...
Posted

I’m very interested in this product. I don’t quite have a feel for the front end yet, so this would be nice for parking in tight spots.  A couple of questions. Have there been any issues for anyone that has had them installed for a while?  Did anyone route the wire someplace other than that big rubber plug? I don’t really want to cut that. Ty 

Posted (edited)
On 9/9/2018 at 10:33 AM, Donstar said:

Great idea.  Backup camera kits often come on sale for less than $100 at my local auto store and I often wondered if these would work well as a front camera.  They don't advertise these products as having the option of being used up front but I don't see why not.  Of course they wont be integrated with your dash display but an additional small screen dedicated to this purpose would look fine when considering the money saved!

Donstar. Did you go with the intellihaul camera, and how do you like it? Where did you route the camera wire? Ty 

Edited by Jchoi
Posted

I installed an aftermarket Pioneer radio and slapped a camera under the transmission looking forward.  My wife's not very good at spotting while offroad so this turned out really well.  I can see where my tires are in relation to the trail.  I can't remember which camera I bought but it wasnt very expensive.

  • Like 1
Posted

I am considering doing this mod, once you get cable through the firewall, do you have to take the dash apart to connect this camera to the infotainment center? It would be nice to have this camera especially when parking and can't quite get an idea how much clearance you have in front of you.

Posted

Was pretty easy.  Hardest part was running the camera wire through the firewall.  You dont have to add power or anything as it hooks up to the factory radio and works from there.  Comes with everything you need to install. 

  • Like 1
Posted
Just now, lerbud said:

Was pretty easy.  Hardest part was running the camera wire through the firewall.  You dont have to add power or anything as it hooks up to the factory radio and works from there.  Comes with everything you need to install. 

How much of the dash did you have to take apart or was it just the bezel around the radio to get the cable harness through to connect to the infotainment radio?

Posted

Here are the instructions:  https://echomaster.com/index.php?controller=attachment&id_attachment=1438

 

Yes just the radio bezel area and you have to plug in a wire at the MVI behind the glovebox.  I did not remove my grill as I just ran the wire and mounted the camera at the M in GMC.  I have a Denali grill.  If you can do any basic work its easy.  I am not a mechanic by any means but I will try a DIY project here and there.  

  • Like 1
Posted
2 minutes ago, lerbud said:

Here are the instructions:  https://echomaster.com/index.php?controller=attachment&id_attachment=1438

 

Yes just the radio bezel area and you have to plug in a wire at the MVI behind the glovebox.  I did not remove my grill as I just ran the wire and mounted the camera at the M in GMC.  I have a Denali grill.  If you can do any basic work its easy.  I am not a mechanic by any means but I will try a DIY project here and there.  

Thanks for the instructions. Doesn’t seem to difficult. Going to order it today.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,459 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...