Jump to content

Recommended Posts

Posted
Update, I received the Echomaster Intellahaul front camera system.  Extremely easy install.  Just watch the videos on Youtube by Echomaster.  The hardest part was going through the firewall.  There is a rubber grommet, where the main wiring harness goes through, but there seems to be multiple layers to it and under the dash you can't seem to get your hand through all the mechanicals to even get to the grommet.  In about an hour or so it was complete.  The instructions state to put the camera right under the bowtie but I chose to go lower after what Jmiller11331 recommended.  All in all I am very happy with the result. 

 

What part number did you go with? I’m only seeing options for the 2018, but i figure it will probably work on my 2015 Sierra. Thanks.

 

 

 

Sent from my iPhone using Tapatalk

Posted
1 hour ago, Alex2015sierra said:

 

What part number did you go with? I’m only seeing options for the 2018, but i figure it will probably work on my 2015 Sierra. Thanks.

 

 

 

Sent from my iPhone using Tapatalk

I bought the Single Front Camera System for $399.   I have a 2017 and yes, I also bought the 2018. 

 

Part # 19366657

 

Hope this helps!

 

  • Like 1
  • 2 weeks later...
Posted

I used the backup camera for my Garmin and mounted it above the M in the grille of my 17 GMC. You have to look really hard to see it. Instead of using a switch, I wired it so that it changes from GPS to front camera whenever I press on the brakes. Real handy when I am parking close to anything in front of me.

Posted
9 hours ago, DJG said:

I used the backup camera for my Garmin and mounted it above the M in the grille of my 17 GMC. You have to look really hard to see it. Instead of using a switch, I wired it so that it changes from GPS to front camera whenever I press on the brakes. Real handy when I am parking close to anything in front of me.

Great idea.  Backup camera kits often come on sale for less than $100 at my local auto store and I often wondered if these would work well as a front camera.  They don't advertise these products as having the option of being used up front but I don't see why not.  Of course they wont be integrated with your dash display but an additional small screen dedicated to this purpose would look fine when considering the money saved!

  • 2 weeks later...
Posted

I’m very interested in this product. I don’t quite have a feel for the front end yet, so this would be nice for parking in tight spots.  A couple of questions. Have there been any issues for anyone that has had them installed for a while?  Did anyone route the wire someplace other than that big rubber plug? I don’t really want to cut that. Ty 

Posted (edited)
On 9/9/2018 at 10:33 AM, Donstar said:

Great idea.  Backup camera kits often come on sale for less than $100 at my local auto store and I often wondered if these would work well as a front camera.  They don't advertise these products as having the option of being used up front but I don't see why not.  Of course they wont be integrated with your dash display but an additional small screen dedicated to this purpose would look fine when considering the money saved!

Donstar. Did you go with the intellihaul camera, and how do you like it? Where did you route the camera wire? Ty 

Edited by Jchoi
Posted

I installed an aftermarket Pioneer radio and slapped a camera under the transmission looking forward.  My wife's not very good at spotting while offroad so this turned out really well.  I can see where my tires are in relation to the trail.  I can't remember which camera I bought but it wasnt very expensive.

  • Like 1
Posted

I am considering doing this mod, once you get cable through the firewall, do you have to take the dash apart to connect this camera to the infotainment center? It would be nice to have this camera especially when parking and can't quite get an idea how much clearance you have in front of you.

Posted

Was pretty easy.  Hardest part was running the camera wire through the firewall.  You dont have to add power or anything as it hooks up to the factory radio and works from there.  Comes with everything you need to install. 

  • Like 1
Posted
Just now, lerbud said:

Was pretty easy.  Hardest part was running the camera wire through the firewall.  You dont have to add power or anything as it hooks up to the factory radio and works from there.  Comes with everything you need to install. 

How much of the dash did you have to take apart or was it just the bezel around the radio to get the cable harness through to connect to the infotainment radio?

Posted

Here are the instructions:  https://echomaster.com/index.php?controller=attachment&id_attachment=1438

 

Yes just the radio bezel area and you have to plug in a wire at the MVI behind the glovebox.  I did not remove my grill as I just ran the wire and mounted the camera at the M in GMC.  I have a Denali grill.  If you can do any basic work its easy.  I am not a mechanic by any means but I will try a DIY project here and there.  

  • Like 1
Posted
2 minutes ago, lerbud said:

Here are the instructions:  https://echomaster.com/index.php?controller=attachment&id_attachment=1438

 

Yes just the radio bezel area and you have to plug in a wire at the MVI behind the glovebox.  I did not remove my grill as I just ran the wire and mounted the camera at the M in GMC.  I have a Denali grill.  If you can do any basic work its easy.  I am not a mechanic by any means but I will try a DIY project here and there.  

Thanks for the instructions. Doesn’t seem to difficult. Going to order it today.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Its coolant disguised as oil.   TSB 20-NA-166 -  20-NA-166 1..3   "To inspect for this concern, add coolant dye to the system, run the engine through warm up, pressurize the cooling system after warming the engine to operating temperature (let the engine cool overnight) and inspect the suspect cylinder with a borescope for coolant dye evidence. At times it may be necessary to remove the head for inspection. If the head casting line is the concern, the intake port will be wet with a coolant oil mix"
    • Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...