Jump to content

$500 to spend


Centex14

Recommended Posts

Posted

What would you spend $500 on? I’ve already got a Borla exhaust, volant intake, and diablo canned tune. Don’t want a custom tune until I get headers. Tires are brand new so not getting those. Could probably use new shocks since it looks like the original ranchos are still on it at a 115k miles. Not quite enough money for a decent sub setup. Maybe some n-fab step bars?

 

 

2014 z71 LTZ

Volant Intake

Borla Exhaust

Diablo

Posted

Personally, I would put the $500 in the bank and try to deposit additional money into that account every month until I was 65 years old. 

 

However, if I HAD to spend the money on my truck, I would do this: 

 

 

 

 

7257955.jpg

warn-gen-2-trans4mer-2014-chevy-silverado-1500.jpg

CHEVY-GMC_1500_LANDING.jpg

Posted

My vote would be either the bilstein 5100's or the N-Fab bars.  I had a set of both on my previous truck and loved them.

Posted
Personally, I would put the $500 in the bank and try to deposit additional money into that account every month until I was 65 years old. 
 
However, if I HAD to spend the money on my truck, I would do this: 
 
 
 
 
7257955.jpg.d1e1e90ff5d18775d8006ec4f51da2ee.jpg
warn-gen-2-trans4mer-2014-chevy-silverado-1500.thumb.jpg.9768bd62c3169fac5695f62128777fd6.jpg
CHEVY-GMC_1500_LANDING.thumb.jpg.85d138067228ad82b9f2b0a4cea03638.jpg


My 401k contributions are maxed, my Roth IRA contributions are maxed, I contribute money to a brokerage account every month, and fund my daughters college account. If I want to take $500 and blow it on a vehicle I think I’ll be alright.


2014 z71 LTZ
Volant Intake
Borla Exhaust
Diablo
Posted
Bilstein 5100s

My vote would be either the bilstein 5100's or the N-Fab bars.  I had a set of both on my previous truck and loved them.


That’s what I’m leaning towards. Leave them on the lowest setting until it’s time for tires and then raise them up to level it out.


2014 z71 LTZ
Volant Intake
Borla Exhaust
Diablo
Posted
8 minutes ago, Centex14 said:

My 401k contributions are maxed, my Roth IRA contributions are maxed, I contribute money to a brokerage account every month, and fund my daughters college account. If I want to take $500 and blow it on a vehicle I think I’ll be alright.

 

   You are smarter than most. 

Posted

Mom beat it in my head. Only regret is I didn’t start at 16 and waited//screwed off until I was 27. C’est la vie.


2014 z71 LTZ
Volant Intake
Borla Exhaust
Diablo

Posted
5 minutes ago, texasaggies16 said:

Do 5100's, and pocket the rest. No doubt will be the best money spent I think

You'll truly regret not doing the 5100's a long, long time ago.  The ride is radically different, especially now that you're used to 100K+ mile rancho's.

Posted

While were talking about shocks, my 14 has 98k on it and i was wondering around how many miles everybody was starting to change theirs out at

Posted

Shocks and grill guards are good ideas.  However, with finances in such good shape, have you thought about refreshing your '14 with an '18?  I know this is more than $500 but when you factor in a 4 year newer vehicle  c/w new vehicle warranty and current price incentives, now could be the right time.  I have found that it is often better to buy a vehicle before you need a new vehicle.

Posted
While were talking about shocks, my 14 has 98k on it and i was wondering around how many miles everybody was starting to change theirs out at

I’m at 75k on my Sierra and I have a blown rear. In the process of ordering Eibach pro truck shocks/struts. Same issue in my f150, 75,000 miles is all I can get I guess


Waterfowler 41’s Youtube channel: https://www.youtube.com/user/brittmork

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Most say the oil temperature needs to above the boiling point of water to rid it of moisture and long enough to dry it. Many think that is about a hour at 212 F or more. Those people have never line dried cloths in a Midwest winter. Leave a pan of water sitting on the counter and eventually it all evaporates. So heat drives the time it takes. Water in oil under 175 F, the Nitration initiation temperature, is a minimum then for temperature and samples I've done that use Karl Fisher method say about a hour (in a healthy well tuned motor) over 175 F will dry it to under 800 ppm. Low enough to not be much of a factor. Motors with weak rings will take longer and the colder the air temperature the longer it takes.   On a cold motor there is also the condensation temperature. Blowby gases that contain moisture are subject to that cold cylinder wall, like sweat on a glass of ice tea. But also subject to the Law of Partial Pressures. Wear studies by GM and the DOD  indicate wear is a real issue below 85 F and a concern to 140 F but doesn't become a minimal factor until about 160 F. You know this intuitively when you see water vapor exit the exhaust pipe until the system gets above the dew point. It isn't magic, it's physics and it fascinates me. I know you didn't ask but....I over share sometimes. 😉    You keep the Camaro's high and tight.  
    • Move further away.   Benefit of living out - none of our cars get short cycled, plenty of warm up time.   Curious how much time/temperature it takes to drive moisture/condensation out of the engine?
    • Switch a a 100% synthetic trans fluid, Amsoil works for me.
    • First of all sorry, I know there are a ton of transmission temperature threads...   My truck is a 2025 LZ0 High (10l89 10-speed) High Country with NHT max trailering package. The NHT package is supposed to have "enhanced cooling."   Normally the trans temp sits around 200. It seems like with any real stress it quickly jumps into the 220s (for example climbing a grade unloaded at lower speeds). I haven't towed much with this truck, but I'm concerned if it gets this hot unloaded.    I've tried a few different things to keep the temps down (tow/haul mode, sport mode, low range when that makes sense) and nothing seems to affect it.    I'm curious if others are the same behavior or if anyone has found techniques to keep the temps down. It seems like it just can't handle reduced airflow at lower speeds, even with relatively light loading.    Thanks!      
    • I'm at 105,000 miles on my baby Duramax. No issues yet. I hit 31 mpg's traveling through hilly terrain to a project in Colorado. I will buy another 3.0. I'm not concerned.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...