Jump to content

Owners Pictures of 35" Tires on Stock AT4 or Trail Boss

rikhek

By rikhek
in Modifications, Wheels & Tires

 Share

Recommended Posts

logantweed24 New Member

logantweed24

Posted
Posted
4 hours ago, SuthrnZ71 said:

One thing to remember is the Nitto Ridge Grappler in 35x12.50 runs a bit smaller than other 35s, so makes sense he could fit those.  I had those tires on my 17' Silverado lifted and later changed to 35x12.50 Toyo MTs and man the tires looked huge compared to the Nitto Ridge, in a good way of course but I could see if someone tried running the Toyo MTs which run more true to size they might rub vs the nittos.


I have ran a bunch of different 35x12.50s and I measured the ridge grapplers and they are very much so true to size. I have ran a couple other brands that were significantly smaller than the ridge grapplers. 

  • Replies 683
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Donnyb313
Donnyb313

Just had these 35x12.5R18 BFGoodrich KO2's put on yesterday. Trailboss with 1" level, no rubbing. They may have fit without the level, but I didn't like the rake.    The manager at the 4 whe

Trailboss91
Trailboss91

295/70r18 Falken Wildpeak AT3W tires, 34.3” diameter with no trimming needed. No level as well. 

AJMBLAZER
AJMBLAZER

I’m a big fan of big tires and low/no lift.    The tiny wheel wells of my 2011 have frustrated me in this regard. Big 32’s instead of the 33’s I always had. Then again, hard to take a cut of

Posted Images

z28tranz Enthusiast

z28tranz

Posted
Posted
On 7/3/2021 at 11:52 PM, derichio02 said:


I’m hoping the same. I have a 21’ AT4 with stock suspension and just purchased 20x9 +18 Method NV305 with 285/60/20 Ridge Grapplers. Not sure if they will fit but decided to push the envelope. If they don’t fit I’ll just leave them in my garage until I lift (kind of swaying against a level unfortunately) Did you get your new setup yet? 

How well did the wheels and tires fit?

  • 2 months later...
Mike tb New Member

Mike tb

Posted
Posted
On 3/1/2022 at 11:51 AM, z28tranz said:

How well did the wheels and tires fit?

Wait till you see how bad they are to balance 33s12.5 20s on my trailboss horrible ride, trying to get balance beads in but what a pain in the ass, Noone wants to balance them at least correctly! Or want 150 to pop the bead to throw beads in there smh!

  • 7 months later...
  • 3 weeks later...
Poopster Enthusiast

Poopster

Posted
Posted
On 7/1/2019 at 9:06 PM, BlackLS said:

Bora are the best quality spacers available and they will make any size you need. I had them make me a custom 8mm thick with 78.1 mm hub x 106 mm bore spacer to fit my Fuel Maverick wheels.

 

I recommend their Hub Centric/Wheel Centric Spacers for a perfect fit.

 

http://www.motorsport-tech.com/index.html

 

Finally, someone with an AT4 with 20" wheels, it seems like everyone has 18" wheels. I have a 2022 AT4 with factory 2" level, with 20" stock wheels and I'm wondering if that size tire will fit without any spacer or other mods.

J2Jones Enthusiast

J2Jones

Posted
Posted
7 hours ago, Poopster said:

Finally, someone with an AT4 with 20" wheels, it seems like everyone has 18" wheels. I have a 2022 AT4 with factory 2" level, with 20" stock wheels and I'm wondering if that size tire will fit without any spacer or other mods.

 

I have a 2019 AT4 with 20" wheels running 35x11.50 Ridge Grapplers without any other suspension mods.  Had to tie the fender liner on the driver side front back a little with a zip tie because there was some very slight rubbing at full lock.  No other changes needed.

Poopster Enthusiast

Poopster

Posted
Posted
10 hours ago, J2Jones said:

 

I have a 2019 AT4 with 20" wheels running 35x11.50 Ridge Grapplers without any other suspension mods.  Had to tie the fender liner on the driver side front back a little with a zip tie because there was some very slight rubbing at full lock.  No other changes needed.

Thank you very much. If I do get new tires I'll be sure to post some pictures of them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • diyer2
      Navigating senior years.

      By diyer2 · Posted

      I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • No F-bdy Bs
      SERCICE ESC message?

      By No F-bdy Bs · Posted

      Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • newdude
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By newdude · Posted

      This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      I was unaware of that, thanks for updating me.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...