Jump to content

Recommended Posts

Posted
https://www.americantrucks.com/rough-country-silverado1500-tow-hook-to-shackle-conversion-kit-rs147.html
 
Picked up a set of black shackles on Amazon for $20 and they fit perfectly. Install was 15 minutes. Shackles are great when actually pulling stuff with your truck and a tow strap. 
 
As a tip... Use a piece of cardboard or something under the shackle braces when sliding them in place. This will prevent them digging into the plastic under them when getting lined up. Luckily I noticed this before anything went sideways. 
 
Also put some black zip ties on the shackle bolts to prevent them from creeping out or some 8 year old kid from taking them off in a parking lot. 

In case anybody was wondering for sure, these will fit a GMC Sierra as well. Put mine on today.

If you want to keep the rubber dust cover you can, but there is a trick to it. You have to take factory tow hook out. Pull the boot out. Put the new tow hook in through the bumper from the back side.

Line it up then slide it up inside the frame rail, all the way in where you have to reach in with your finger to get it out.

Then put the rubber boot back in place. Then reach through from the front bumper through the boot, and pull the new tow hook through them both.

It’s a bit hard, you have to work it back through, but it will go. Once it slides through bolt it up!


Sent from my iPhone using Tapatalk
  • 3 weeks later...
Posted

I am interested in trying the red tow hooks on My RST.   I don't want to trade in case I don't like the way they look.   Anyone out there that had the red ones and swapped them out for black ones or shackles?   If so, I am interested in buying your red ones.   Please let me know.

 

Posted
On 12/13/2020 at 12:16 PM, JTD's RST said:

I am interested in trying the red tow hooks on My RST.   I don't want to trade in case I don't like the way they look.   Anyone out there that had the red ones and swapped them out for black ones or shackles?   If so, I am interested in buying your red ones.   Please let me know.

 

I got a set let me know

Posted
Just now, Coles5515 said:

I got a set let me know

Let me know how much you want for them. shipped to 48009.

Thanks 

Posted
4 hours ago, JTD's RST said:

Let me know how much you want for them. shipped to 48009.

Thanks 

Sent you a PM

  • 1 month later...
Posted

Anyone still have their red ones that they’re willing to part with? 

Posted
3 hours ago, RudyJ07 said:

Anyone still have their red ones that they’re willing to part with? 

I do have some available for a GMC AT4. 

  • 2 weeks later...
Posted
On 1/19/2021 at 7:57 AM, TXguy said:

I do have some available for a GMC AT4. 

Do you still have them?  Do you know if they'll fit the Elevation?

Posted

Let me know if anyone is interested in selling their GMC red hooks?   

Posted

if anyone has red tow hooks please message me ill buy or trade my black ones thanks

Posted
Just now, chris918 said:

if anyone has red tow hooks please message me ill buy or trade my black ones thanks

I have some I took off my truck I’m willing to sell. 

Posted
23 hours ago, TXguy said:

I have some I took off my truck I’m willing to sell. 

I’ll buy them off you. Are they the red AT4? 

Posted
if anyone has red tow hooks please message me ill buy or trade my black ones thanks

Spray paint, sand paper, and 10 minutes....


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined
  • Who's Online   1 Member, 0 Anonymous, 461 Guests (See full list)


  • Latest Articles

  • Posts

    • Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...