Jump to content

Recommended Posts

Posted (edited)
41 minutes ago, GN2018 said:

Wow,  now I feel like a fool.  My dealer told me four months.  I could have paid cash but I got the $1500 incentive to finance.  I’m right now at four months.  Wish I would have asked about this or seen this thread sooner.

 

For those of you looking at your financing paperwork, I think you’re looking in the wrong place.  The language would be in paperwork associated with the incentive.  This is where I really feel foolish.  I just took the word of the dealers finance guy.  I should have asked to see the four months in writing.  Lesson learned.  Find it, or ask, to see their claim that you have to wait in writing.

 

Live and learn. Your most valuable lesson, assuming you grasped it, is that anyone at a car dealer cannot be relied upon for so much as the time of day.

 

PS ----- How much of that $1500 incentive vanished in those four months?

Edited by duquephart
  • Like 1
Posted

My salesman told me that, "Just make a one month payment and then pay it off." That dealership in San Diego was really honest and upfront with everything. We couldn't agree on the price of my trade-in so they suggested CarMax and I got more from CarMax.

The salesman also said there's no prepayment penalty at all.

That's in California. I believe it's the law.

Posted
8 hours ago, duquephart said:

 

Live and learn. Your most valuable lesson, assuming you grasped it, is that anyone at a car dealer cannot be relied upon for so much as the time of day.

 

PS ----- How much of that $1500 incentive vanished in those four months?

PS - About half.  Still worth it, but could have had it all. Yes, live and learn. That lesson hurt a bit though.  

Posted
10 hours ago, Daverado said:

 

If you plan to refinance elsewhere, then you should subtract the interest cost from the alternative bank to find out the "extra" cost of GM financing over that 6 months.

 

If you planned to pay cash but finance just to get that incentive then your math is solid.

 

Absolutely. Also, my dealer was totally transparent about the fact that I could pay it off right away, but that it would screw them out of their rebate, and they were really good otherwise too, so I’m going to work with them. But since I was considering paying cash, I’m just going to make a big payment ASAP and knock out almost all of the loan, leaving the few payments they said they need (6, they said). It won’t cost much at all in interest that way and they said as long as the loan exists in any form for that length of time, they get their kickback and everyone’s happy. I’m not sure there’s a similar way to work if you’re planning to refi, but for a cash deal this should work pretty well for all.

Posted

Yeah, that’s what I should have done.  Made four large payments or even most of it on the first payment so I wouldn’t have paid as much interest.  

Posted

Nearly always it is better to check with the local banks and see who is promoting auto loans and then negotiate a cash price with the dealer. The bank can pre-approve a dollar amount and then cut you the check for the dealer in a day's time.

 

Dealers get a kick back on any financing (or extended warranty) they sell customers. But sometimes a manufacturer will provide very low financing or even zero interest if they have two many days inventory already produced and sitting on the lots.

 

 

Posted

I would not do it that way because sometimes Chevrolet offers a $1,000 cash rebate if you finance through them.. then a month later, go back to your credit union or pay it off in cash.

Posted
8 hours ago, Wintersun said:

Nearly always it is better to check with the local banks and see who is promoting auto loans and then negotiate a cash price with the dealer. The bank can pre-approve a dollar amount and then cut you the check for the dealer in a day's time.

 

Dealers get a kick back on any financing (or extended warranty) they sell customers. But sometimes a manufacturer will provide very low financing or even zero interest if they have two many days inventory already produced and sitting on the lots.

 

 

 

You never want to "negotiate a cash price with the dealer." All deals are cash deals to the dealer and playing that card is stupid. You are likely to get your best deal if he thinks he is going to cash in on a financing spiff as well as everything else.

Posted (edited)

Bought my trail boss today.  Used GMF. Specifically asked the finance guy about this topic for the thread’s sake.  Guy laughed and said, “Makes no difference to us.  Get the registration and refi the thing right away.  It’ll save you some money.”

 

End of story.   

Edited by Jackwards
Posted

You never want to "negotiate a cash price with the dealer." All deals are cash deals to the dealer and playing that card is stupid. You are likely to get your best deal if he thinks he is going to cash in on a financing spiff as well as everything else.

True IMO.

When I bought my used truck they brought up financing. I told them a later discussion.

Negotiated a price, then told them cash deal. They were not happy.

 

I was told by friends that were car salesmen to never bring up trade ins or cash buys.

Negotiate the cost of the purchased vehicle, then the trade value. This stops them from playing with the numbers.

You have to remember they are trained at this and do it every day to maximize profit.

 

:)

Posted
47 minutes ago, diyer2 said:

You never want to "negotiate a cash price with the dealer." All deals are cash deals to the dealer and playing that card is stupid. You are likely to get your best deal if he thinks he is going to cash in on a financing spiff as well as everything else.

True IMO.

When I bought my used truck they brought up financing. I told them a later discussion.

Negotiated a price, then told them cash deal. They were not happy.

 

I was told by friends that were car salesmen to never bring up trade ins or cash buys.

Negotiate the cost of the purchased vehicle, then the trade value. This stops them from playing with the numbers.

You have to remember they are trained at this and do it every day to maximize profit.

 

:)

 

It is amazing that this needs to be brought up time after time on boards as sophisticated as this. The first, foremost, cardinal, etc. rule in price negotiations at a car dealer is to keep all transactions separate. The phrase "we'll talk about step two (three, four, etc.) after we complete step one" is your best friend. Within fifteen minutes of arriving at a dealership the salesman knows way too much about the typical dope: what he wants, what he is trading, what his ideal payment is, his time frame, etc. Don't be that guy. This is called "qualifying" and is standard procedure ----- they are way better at selling than you are at buying so you need to eliminate as much of their advantage as possible.

  • Like 2
Posted

When does the first paperwork arrive with your account number? I purchased two weeks ago and GMF just showed up on my bureaus today. I haven't received anything from them in the mail yet.

Posted
1 hour ago, UGADawgs said:

When does the first paperwork arrive with your account number? I purchased two weeks ago and GMF just showed up on my bureaus today. I haven't received anything from them in the mail yet.

If you call the customer service number on the GMF website the automated system gives the option to look up your account by SSN or account number. I tried my SSN but nothing yet. Spoke with a rep and she said give it 2-2.5 weeks. So yours might be up by now.

  • Like 1
Posted

Mine came within 2 weeks. Will make the first payment in a couple weeks from now then pay it off.

  • Like 1
Posted (edited)
8 hours ago, relevante said:

If you call the customer service number on the GMF website the automated system gives the option to look up your account by SSN or account number. I tried my SSN but nothing yet. Spoke with a rep and she said give it 2-2.5 weeks. So yours might be up by now.

I called them and used last four of SSN and got account #, etc. Thanks!

 

10day payoff balance is already $260 higher from interest in just two weeks. Crazy! 

Edited by UGADawgs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,866
    Total Members
    8,960
    Most Online
    Greg3160
    Newest Member
    Greg3160
    Joined
  • Who's Online   5 Members, 0 Anonymous, 501 Guests (See full list)


  • Latest Articles

  • Posts

    • Late reply, but yes—it works on the SLT trim. Compatibility comes down to the plastic shroud shape behind your mirror, not the trim badge itself. On the SLT with auto-dimming, it uses a plug-and-play Y-harness off the mirror/rain sensor power, so no need to run wires down to the OBD port. If anyone's ever unsure about fitment, just drop a photo of your mirror housing and we can double-check it.   Appreciate the detailed feedback on the install! On the windshield glare—we actually took feedback like yours and developed a dedicated CPL (polarizer) filter to cut down dash reflections on sunny days. If you're still running the cam, shoot me a DM. I'd be happy to send a CPL filter over for you to test out—no charge. 
    • There are no stickers in your glovebox?
    • Look at the numbers on the stickers in the door jam...
    • Yes, every time the developer updates his code, you must recompile. I will private message you with the latest because it changes pretty much with every version.
    • After I wrote that reply I went for a ride. 85 F out. So trans started at 85 F and it shifted the same as it did an hour latter at 168 F. I've never actually recorded the to cold to shift point but it is under 32 F before they start hanging on to a lower gear or leaving the converter unlocked. Both intended to heat fluid.    Yes, brake or bake. Absolutely.      Your welcome. True research ended decades ago. Field trials are still in play.    There is a thing called oxidation onset temperature. This is the heat related oxidation not the O2 exposure kind. For mineral oil that starts at 140 F. So what happens after 140 F? Each 20 F cuts fluid life in half! Does using a Full Synthetic improve that? Yes! By how much? Depends on the base oil type and a few other factors. But enough to notice. Some esters are even higher. There are even synergies between types the will raise it higher than any one component is alone.    Then there is "Hindered" oils. Antioxidant additives. Hindered Polyol Esters can sit at 500 F for years in a turbine.   When a blender brags his oil will 'take 500 F" in service he doesn't specify for how long. Water will dance on a 500 F hot plate for several seconds. @newdude put up a chart showing the relationship between fluid temperature and it's life in an automatic transmission. Here's a version of that chart for Group III based oils. These temperatures are those in the pan as observed as 'normal'. that is you drive as you do for as long as you do under what load you ask of it and whatever that temperature is this graph applies to. Flash temperatures of a few minutes isn't what his means.    Note that fluids held at a constant 240 F have a service life of only 20K miles. 220 F explains the factory exchange limit, eh? My equipment I keep under 180 F and I'm good if the cooler will hold it as low as 140 F. But that's me.   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...